[App_rpt-users] Icom F510 / F610

[Jon Rorke]

Looks like you will want to connect to RX audio to 3
TX audio to Pin 4 and ptt to 5.

Connect ground (earth) to pins 8 and 9.

Then you can set up your node for Flat audio in and Composite TX audio 
out for direct connection to modulator. (TX prelim=yes)

Jon VA3RQ
On 10/5/2013 9:51 AM, keith wrote:
>
> Good afternoon from the UK,
>
> Has anyone installed an Icom F510 or F610 as a node radio?  I managed 
> to locate a 9 pin APC-617 aux connection and the following detail from 
> Icom.
>
> Any help would be great Port definition as detailed. I have built the 
> CM108 USB key fob and at present use a Motorola GM 380 PMR this works 
> great but its nice to have a spare radio.
>
>    Kind Regards
>
>    Keith Handscombe     G7DNT
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131005/1fdca13e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 79143 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131005/1fdca13e/attachment.png>