[App_rpt-users] Squelch Burst

[David McGough]

Jim,

chan_usbradio does have the ability stop squelch crashes when using 
hardwared COS/CTCSS signaling by applying an audio delay and chopping off 
a selected number of ms of trailing audio after COS/CTCSS drops.

Try these changes in usbradio.conf:

[usb]

carrierfrom=usb		; could be usbinvert
ctcssfrom=no
rxdemod=flat            ; input type from radio -- *must* be set to *flat*
rxsquelchdelay=150	; Number of milliseconds to "chop"


Have fun -- I hope this helps!

73, David KB4FXC



On Sun, 6 Oct 2013, Jim W7RY wrote:

> Spifically, when I use COR from the radio, I have a squelch crash when a 
> user unkeys. If I use squelch=dsp, then the crash is not there. But, the 
> squelch action of the node receiver is not the best. I would really like 
> to use COR but dislike the squelch burst. Is there a way to delay the 
> audio and shut it off before the squelch closes? Like in a audio delay 
> board for a repeater controller?
> 
> Thanks for info that you could pass along.
> 
> 
> 73
> Jim W7RY
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>