[App_rpt-users] App_rpt-users Digest, Vol 56, Issue 28

Tim Sawyer tim.sawyer at me.com
Fri Oct 11 23:24:54 UTC 2013 

repeaterbook.com also lists Allstar repeaters. 
--
Tim
:wq

On Oct 11, 2013, at 1:39 PM, Bradley Haney <hammin75 at gmail.com> wrote:

> IL  Repeater Association will list   ALL-STAR NODES  :)   on the website
> 
> 
> On Fri, Oct 11, 2013 at 1:54 PM, <app_rpt-users-request at ohnosec.org> wrote:
> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: App_rpt-users Digest, Vol 56, Issue 20 (Bryan D. Boyle)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 11 Oct 2013 14:54:13 -0400
> From: "Bryan D. Boyle" <bdboyle at bdboyle.com>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
> Message-ID: <D225A0BA-1F24-4F17-A8B0-7219BAF9C2F5 at bdboyle.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> and if you bridge allstar (superior and more flexible) to IRLP (old 1990s technology held together with patches and gyrations), Mr Cameron will get his shorts in a wad and cancel your credentials (but leave you listed as an active node to hide the fact that his numbers of real nodes is less than it was...).
> 
> yeah, it still has some mindshare (especially amongst the dinosaurs in the ARRL, who refuse to acknowledge that allstar exists...and despite the population of a* approaching that of the older stuff, have refused to list our nodes as such in the repeater directory...),  but progress waits for no man.
> 
> --
> Bryan
> Sent from my iPad
> 
> > On Oct 11, 2013, at 1:47 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
> >
> > Plug in your URI, RIM, or usb sound device and you will see it pop up on the linux screen
> > as [root@~]  radio-tune-menu
> > the radio tune menu will allow you to setup your sound devices provided your .conf files are correct
> > ACID is a repeater controller if you have 2 URIs or RIMs  you can bridge your IRLP node
> > beside IRLP configured on an ACID install had some audio level issues. Not sure about
> > Xipar but it also had configs for IRLP.  I only tested it on ACID
> > p.s. Scott I noticed you seen the publicizing for the RIM
> > JK
> >
> > From: Richard Szajkowski <va3rzs at gmail.com>
> > To: Johnny Keeker <cypresstower at yahoo.com>
> > Cc: App_rpt Users <app_rpt-users at ohnosec.org>
> > Sent: Friday, October 11, 2013 1:06 PM
> > Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
> >
> > How will I know if it works after I plug it in ? Is there a script that I need to run it install it
> >
> > I am finding the docs out of date or not there at all (some links are dead like for the 4 port card)
> >
> > I know IRLP is not supported any more , sad as I run an IRLP node , and would have liked to run all 3 networks on one computer , to save a port for the 220 repeater
> >
> > I thank you for all your help ,
> >
> > Richard Szajkowski
> >
> >
> >> On Oct 11, 2013, at 12:43 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
> >>
> >> I don't know the device but if it has a CM108 or CM119 chip it will.
> >> Personally, I use startech sound fobs. They're easily modifiable
> >> using surface mount components and they're reliable. URI's are very
> >> good, but have my eye on the RIM as it has advantages over the URI.
> >> JK
> >> From: Richard Szajkowski <va3rzs at gmail.com>
> >> To: Johnny Keeker <cypresstower at yahoo.com>
> >> Sent: Friday, October 11, 2013 11:42 AM
> >> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
> >>
> >> Do you know if the signal link USB sound card would work ????  I have ordered a uri , but I was asked if I would host a node for another repeater
> >>
> >> Richard Szajkowski
> >>
> >>
> >>> On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
> >>>
> >>> At the least you have success.  It takes about 10 minutes or less, when you first boot
> >>> before your node reports to all the other on-line nodes. Some of my nodes
> >>> use a static IP and others DHCP with reserved address.  Let us all know how things
> >>> work out for you.
> >>> Good luck Richard
> >>> JK
> >>>
> >>> From: Richard Szajkowski <va3rzs at gmail.com>
> >>> To: Johnny Keeker <cypresstower at yahoo.com>
> >>> Sent: Thursday, October 10, 2013 7:02 PM
> >>> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
> >>>
> >>> I now have what I think is a working system ,
> >>>
> >>> For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs
> >>>
> >>> If I tell it to pull down the info from the server for he node it dies
> >>>
> >>> I need it on a static IP for port fowarding , just like my other VoIP systems
> >>>
> >>> And I did do the info on the web portal to the best I can, I entered in all the info it requested
> >>>
> >>> I even got to install your device now , this will be here Tuesday because of our long weekend
> >>>
> >>> Thanks for all the help
> >>>
> >>> Richard Szajkowski
> >>>
> >>>
> >>>> On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
> >>>>
> >>>> did you Not Create an installation disk????
> >>>> I thought you were past that point and sitting at the test prompt
> >>>> If you completed the ACID install and got the test prompt
> >>>> the password is 'setup'
> >>>> once your in root type passwd and change it
> >>>> nodesetup.sh   will run the script to push your node config files from the allstar server to
> >>>> your node "provided you created and saved the files prior to your ACID installation"
> >>>> JK
> >>>>
> >>>>
> >>>>
> >>>> From: "zeppelin.1 at netzero.com" <zeppelin.1 at netzero.com>
> >>>> To: app_rpt-users at ohnosec.org
> >>>> Sent: Thursday, October 10, 2013 5:20 PM
> >>>> Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
> >>>>
> >>>> Hello Richard and welcome to the Linux world;
> >>>>                                                                   You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.
> >>>> 73 Anton/ KC2RQR
> >>>> Node 29103
> >>>>
> >>>> ---------- Original Message ----------
> >>>> From: app_rpt-users-request at ohnosec.org
> >>>> To: app_rpt-users at ohnosec.org
> >>>> Subject: App_rpt-users Digest, Vol 56, Issue 20
> >>>> Date: Thu, 10 Oct 2013 12:00:01 -0400
> >>>>
> >>>> Send App_rpt-users mailing list submissions to
> >>>> app_rpt-users at ohnosec.org
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>> or, via email, send a message with subject or body 'help' to
> >>>> app_rpt-users-request at ohnosec.org
> >>>>
> >>>> You can reach the person managing the list at
> >>>> app_rpt-users-owner at ohnosec.org
> >>>>
> >>>> When replying, please edit your Subject line so it is more specific
> >>>> than "Re: Contents of App_rpt-users digest..."
> >>>>
> >>>>
> >>>> Today's Topics:
> >>>>
> >>>>   1. Help with new install (Richard Szajkowski)
> >>>>
> >>>>
> >>>> ----------------------------------------------------------------------
> >>>>
> >>>> Message: 1
> >>>> Date: Wed, 9 Oct 2013 18:14:55 -0400
> >>>> From: Richard Szajkowski <va3rzs at gmail.com>
> >>>> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> >>>> Subject: [App_rpt-users] Help with new install
> >>>> Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com>
> >>>> Content-Type: text/plain; charset=us-ascii
> >>>>
> >>>> Hello to the group
> >>>>
> >>>> I am trying to get the computer on line while my interface is shipped
> >>>>
> >>>> I downloaded the ISO off the website , followed the prompts , I am not at a prompt
> >>>> Test >
> >>>>
> >>>> I did not enter a root password as I was not asked
> >>>>
> >>>> I can't find a PDF or anything on 1st time installs
> >>>>
> >>>> Any help would be great
> >>>>
> >>>> Thanks
> >>>>
> >>>> Richard Szajkowski va3rzs
> >>>>
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>
> >>>>
> >>>> End of App_rpt-users Digest, Vol 56, Issue 20
> >>>> *********************************************
> >>>> ____________________________________________________________
> >>>> NetZero now offers 4G mobile broadband. Sign up now.
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20131011/9fe186ed/attachment.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 56, Issue 28
> *********************************************
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131011/b25e53f0/attachment.html>

More information about the App_rpt-users mailing list