[App_rpt-users] DHCP to Static - failure.

[Angelo Glorioso]

Thanks to all who gave great advise. It was the eth0 in the down instead of up mode. It is working fine now.

7 3 de Angelo




  ----- Original Message ----- 
  From: Chuck Henderson 
  To: Angelo Glorioso 
  Cc: app_rpt mailing list 
  Sent: Friday, October 18, 2013 2:05 PM
  Subject: Re: [App_rpt-users] DHCP to Static - failure.


  What do you see if you do
  netstat  -rn


  On Oct 18, 2013 1:34 PM, "Angelo Glorioso" <n5uxt at hotmail.com> wrote:


    I have changed from DHCP at home to a repeater site with Static Ip 
    addresses.
     I have run the system-config-network and changed the ip address, the 
    gateway, the network mask. I have gone into the DNS entries as well.

    It seens there is not route in the kernal. When I try and tracertoute to an 
    outside ithe network, I  get network unreachable.
    It seems the route is missing..

    Any help would be appreciate it. I am still at the site..
    7 3 de Angelo

     
     
     
    --------------------------------------------------------- 
    If you don't ask, you will never know!!

     


    _______________________________________________
    App_rpt-users mailing list
    App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131018/461a070c/attachment.html>