[App_rpt-users] Pin out

[Richard Szajkowski]

thanks , this helps 100%

Going to try and build the cable after supper , and then connect it to the repeater 

One step at a time 

Thanks for all the help

Richard Szajkowski


> On Oct 20, 2013, at 2:01 PM, REDBUTTON_CTRL <jrorke at cogeco.ca> wrote:
> 
> Hi Richard, here are 2 diagrams to wire a radio to the URI with RLC/RC 210 wiring and also a crossover cable if you want to connect to the cobntroller.
> 
> If you want direct wiring follow both diagrams to make a single cable..
> 
> Essentially you want use the URI to radio diagram but reverse the TXA and RXA lines and PTT and COR lines and gender of the db 9 cable to mate with the RLC/RC 210 co9ntroller.
> 
> See attached schematics.
> 
> Regards,
> 
> Jon VA3RQ
> 
>> On 10/20/2013 1:51 PM, Richard Szajkowski wrote:
>> Going to try this again,
>> 
>> Any one have the pin to pin they are useing for a URI to Arcom / linkcomm controller
>> 
>> 
>> 
>> Richard Szajkowski
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> <HAM CONTROLLER CROSSOVER CABLE.pdf>
> <URI INTERFACE.pdf>