[App_rpt-users] URI PTT issue

[Keith Goobie]

Why not program the SCOM to use an inverted PTT signal and program the
usbradio.conf to use an inverted signal for PTT.  That should deal with the
re-boot issue.

Keith


On 9/18/13 4:00 PM, "Corey Badgley" <kc7mrq at bresnan.net> wrote:

> I have an URI on port three of an SCOM 7330 controller. Everything works
> perfectly unless power goes out and the node server reboots. The URI
> keys the controller while the computer boots and stays keyed until one
> of the following occurs:
> 
> 1. Audio from another node is received.
> 2. Telemetry is broadcasted. ( I usually have telemetry turned off)
> 3. Send a command to un-key the PTT.
> 4. Enter echo mode within radio-tune-menu and my audio is rebroadcasted.
> 
> Is there a way to toggle the URI PTT upon a reboot or start-up to ensure
> its logic is in the correct state?
> 
> 
> Have a good day,
> 
> Corey
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA