[App_rpt-users] URI PTT issue

[Kevin Custer]

Or, consider a different radio interface - one that doesn't let the PTT 
happen unless flashy-flashy is going on...

http://www.repeater-builder.com/products/usb-rim.html

Disclaimer:
I have no financial interest in this product - however, I did help 
design it.

Kevin Custer - WJ8G



On 9/18/2013 4:05 PM, Keith Goobie wrote:
> Why not program the SCOM to use an inverted PTT signal and program the
> usbradio.conf to use an inverted signal for PTT.  That should deal with the
> re-boot issue.
>
> Keith
>
>
> On 9/18/13 4:00 PM, "Corey Badgley" <kc7mrq at bresnan.net> wrote:
>
>> I have an URI on port three of an SCOM 7330 controller. Everything works
>> perfectly unless power goes out and the node server reboots. The URI
>> keys the controller while the computer boots and stays keyed until one
>> of the following occurs:
>>
>> 1. Audio from another node is received.
>> 2. Telemetry is broadcasted. ( I usually have telemetry turned off)
>> 3. Send a command to un-key the PTT.
>> 4. Enter echo mode within radio-tune-menu and my audio is rebroadcasted.
>>
>> Is there a way to toggle the URI PTT upon a reboot or start-up to ensure
>> its logic is in the correct state?
>>
>>
>> Have a good day,
>>
>> Corey