[App_rpt-users] Control opp codes

[Robert Newberry]

OK, I see in the copy of rpt.conf.sample right now

 ;92=cop,3     ;system disable

So in theory I would want to change 92 to something I would prefer like
your using 950 and 951.

I think I have that right!

Thanks


On Fri, Sep 27, 2013 at 10:32 AM, Tim Sawyer <tim.sawyer at me.com> wrote:

> System disable turns off the transmitter.
>
> To use cop 3 you would add it your [functions] section in
> /etc/asterisk/rpt.conf for example:
>
> 950 = cop,3    ; Disable system
> 951 = cop,2    ; Enable system
>
> Now *950 will turn off the system and *951 will turn it on.
> --
> Tim
> :wq
>
> On Sep 27, 2013, at 6:42 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>
> Well I'm making headway here. Now I'm confused again. I was looking at a
> way to have the URI stop asserting the PTT line after hearing a certain
> DTMF.
>
> I see cop, 3 ;system disable.
>
> Does this mean DTMF 3 will disable the system? I noticed on ohnosec the
> rpt.conf.sample it says change these to something other than listed below.
>
> Also what exactly happens on a system disable?
>
> Thank you
>
> Apparare Scientior
> Paratus Communicare
> -N1XBM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130927/c9831a00/attachment.html>