[App_rpt-users] Allmon2 on pi remote web server

Tim Sawyer tim.sawyer at mac.com
Sat Apr 12 04:34:16 UTC 2014


I suspect it’s something in your apache config. Try allow all for your DocumentRoot.
--
Tim
:wq

On Apr 11, 2014, at 9:05 PM, Mal Good <malgood at gmail.com> wrote:

> Hi Tim
>  
> I have setup the .htpasswd file in the manner you described.  The line is located in the allmon2 dir, I checked it and it has a one line entry in the file that starts with the user name.
>  
> When I go back to the allmon page and enter the username and password it just comes up with ‘Sorry, login failed’.
>  
> Not sure where to go from here?
>  
> Mal
>  
>  
> From: Tim Sawyer [mailto:tim.sawyer at mac.com] 
> Sent: Friday, 11 April 2014 11:54 PM
> To: Malcolm Good
> Cc: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Allmon2 on pi remote web server
>  
> You need to set a .htpasswd file. On you web sever in the Allmon directory do:
>  
> htpasswd -c .htpasswd <desired username>
>  
> It will then prompt you for what you want the password to be.
> --
> Tim
> :wq
>  
> On Apr 11, 2014, at 8:47 AM, Malcolm Good <malgood at gmail.com> wrote:
> 
> 
> Hi Tim
> 
> Thanks, I'm glad it was something easy!
> 
> But wait there's more...
> 
> I can't get the login side of things to work. Any ideas?
> 
> Mal
> 
> sent from my Samsung Note
> 
> On 11/04/2014 9:57 PM, "Tim Sawyer" <tim.sawyer at mac.com> wrote:
> Did you remember to set the bindaddr in manager.conf?
> 
> ;bindaddr = 127.0.0.1   ; Local interface only!
> bindaddr = 0.0.0.0
> 
> 
> --
> Tim
> :wq
> 
> On Apr 11, 2014, at 4:54 AM, Mal Good <malgood at gmail.com> wrote:
> 
> > Hi
> >
> > I am running a Beagle / LOX combination which is working well.  I have a
> > Raspberry Pi running as a web server, which is also running fine!
> >
> > What I would like to do is run Allmon2 on the web server.  This is where I
> > am having difficulties.  Has anyone done this?  Or set up Allmon2 in a
> > remote web server system?  If so can you let me know what you manager.conf
> > setting are in Asterisk and also what you allmon.ini settings are?
> >
> > My router port forwarding setting, I think, are correct.
> >
> > Any other help would be greatly appreciated.
> >
> >
> > Mal
> > VK6MT
> >
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140411/1eed6b7c/attachment.html>


More information about the App_rpt-users mailing list