[App_rpt-users] /dev/dsp

[Doug Crompton]

Bob,

 Do you have a reason to run uridiag?  Do you suspect your uri is bad? If not there is no reason to run it. Perhaps  app_rpt is running also? You would need to run that exclusively.  Stop asterisk or reboot without starting it before running uridiag. You would need to make up the test cable as per the DMK site to test it.

the snd-pcm-oss modules needs to be loaded. It creates /dev/dsp, /dev/mixer
modprobe snd-pcm-oss  to load

lsmod  to check if it is loaded - or  ls /dev/dsp   - is should be there.


73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: kk6ecm at gmail.com
To: app_rpt-users at ohnosec.org
Date: Mon, 14 Apr 2014 20:29:42 -0700
Subject: [App_rpt-users] /dev/dsp














Any ideas how to solve this one?

 

# uridiag

URIDiag, diagnostic program for the DMK Engineering URI

USB Radio Interface, version 0.8, 04/26/11

 

Found CM108AH USB Radio Interface at 002/003

Unable to re-open DSP device 1: /dev/dsp1

Segmentation fault

 

Do I need a loopback?

 

Thanks,

Bob

kk6ecm







_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140414/707e35d8/attachment.html>