[App_rpt-users] Nodes with Traffic

Doug Crompton doug at crompton.com
Thu Aug 7 00:46:11 UTC 2014


Whenever you have a network of that size someone somewhere should be archiving everything. Doing that you could look back through the logs and audio and determine who it is or at least what node it came from. It would take some sleuthing but the logs are time stamped down to the second.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Wed, 6 Aug 2014 10:50:40 -0400
> From: n3xcc at repeater-builder.com
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Nodes with Traffic
> 
> Skyler,
> 
> I can assure you that yesterday's event was a VERY sporadic event. As with any big link system, 
> there are those that try to ruin it for everyone.
> 
> The evet has been documented, and we are working to figuring out where this traffic originated.
> With as many nodes as are normally connected to the WAN hub, it's nearly impossible to figure out 
> which node a 5s transmission came from. I can assure you, we do our best to keep things in order.
> 
> As with ANY repeater system, linked or not, sometimes things happen.
> 
> Scott - Core Member of the WAN system
> 
> Scott Zimmerman
> Amateur Radio Call N3XCC
> 474 Barnett Road
> Boswell, PA 15531
> 
> On 8/6/2014 8:21 AM, Skyler Fennell wrote:
> >   Well I'm not connecting to the WAN system again, yesterday someone came in and started just saying
> > bad words and not ID'ing. Not a good thing at all for the wide area repeater here in Denver.
> >
> > Is allstar developing in other countries? It would be nice if there was a map of all the nodes.
> >
> > 73
> >
> > Skyler
> >
> > On Aug 5, 2014, at 10:31 PM, Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>> wrote:
> >
> >>
> >>
> >> **
> >> The biggest problem with a large net like the Alaska Morning Net is that you have stations coming
> >> in from IRLP, Echolink, Allstar, Phone, and other means. Some with great audio and some with audio
> >> so bad you can hardly understand what they are saying. Even the net controls often have lousy
> >> audio or connections. Level is the biggest problem. Lower is better than higher. Digital networks
> >> need headroom! There is nothing more grating than clipped audio! If you don't tell someone they
> >> have bad audio they may never know. If you tell them it is bad and they don't fix it then it is on
> >> them.
> >>
> >> *73 Doug
> >> WA3DSP
> >> http://www.crompton.com/hamradio*
> >>
> >>
> >> > Date: Tue, 5 Aug 2014 09:17:54 -0500
> >> > From: ars.w5omr at gmail.com <mailto:ars.w5omr at gmail.com>
> >> > To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> >> > Subject: Re: [App_rpt-users] Nodes with Traffic
> >> >
> >> >
> >> > On 07/31/2014 07:36 PM, Kirk Just Kirk wrote:
> >> > > Yes indeed!!! connect to 2560 and get your fill of.....
> >> > > Non stop radio checks.....
> >> > > Audio critics.....
> >> > > Operating critics.....
> >> > > I love myself Coronado Dave......
> >> > > Comments.....
> >> > > Breaks.......
> >> > > Mouth farts......
> >> > > REAL Farts......
> >> > > Burps.....
> >> > > 500 pound women telling you how to operate, that you need to shut up
> >> > > every 20 minutes while they talk all day and night
> >> > > Shorty telling you how to operate/act....
> >> > > Made up technical standards.....
> >> > > Just ask for a check in hahaha....
> >> > >
> >> > > This should either burn your transmitter in or UP.......
> >> > >
> >> > > Please have a bottle of TUMS ready...possibly a bottle of Damn-It-All
> >> >
> >> > Exactly why the 'Alaska Net' sounds appeasing, and even -it- turns my
> >> > stomach...
> >> >
> >> > You can go there, Skylar, for quantity, but I have a feeling that if you
> >> > -did- connect there, the Rocky Mountain Repeater Club would tell you to
> >> > take that crap off of their repeater.
> >> >
> >> > ... just saying ...
> >> >
> >> > -Geoff/W5OMR
> >> > 29655
> >> >
> >> > _______________________________________________
> >> > App_rpt-users mailing list
> >> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >
> >> > To unsubscribe from this list please visit
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
> >> page. Enter your email address and press the "Unsubscribe or edit options button"
> >> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have
> >> trouble unsubscribing, please send a message to the list detailing the problem.
> >> >
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
> >> page. Enter your email address and press the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have
> >> trouble unsubscribing, please send a message to the list detailing the problem.
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140806/2298b2bd/attachment.html>


More information about the App_rpt-users mailing list