[App_rpt-users] Linking to other server/nodes behind router

[Doug Crompton]

But remember if you have multiple servers on the same router you will likely want to have each on its own port. This is not necessary locally but if you want outside connections to the nodes on each server you will need to route the port you set for the server to the IP of that server.  So each server needs to be different.

So -
29999 = radio at 192.168.1.223/29999,NONE

might become -

29999 = radio at 192.168.1.223:4568/29999,NONE

If this were your second server. The first would be the default 4569. You would set the port for the second and subsequent servers in iax.conf and you also need to set the port for any server that is not 4569 at allstarlink.org.  You need to add these entries in all local servers pointing to the others on your LAN - each server has to have entries for all the others with proper ports.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: kk6ecm at gmail.com
> Date: Fri, 15 Aug 2014 13:25:53 -0700
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Linking to other server/nodes behind router
> 
> I have a couple of servers/nodes behind my router which I can link to others on different public IP addresses, but am having difficulty linking behind my router. I have unique UDP port addresses, which are registered at the Allstarlink.org website for each server. I want to use iaxRpt to perform the linking, and understand I need to use <IP address>:<UDP Port number> in iaxRpt for connecting outside, but it does not seem to work with our without the ":<UDP port number> in iaxRpt... not sure what I'm missing here.
> 
> Thanks,
> Bob
> kk6ecm
> 
> Sent from iPad
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140815/be68c032/attachment.html>