[App_rpt-users] startup_macro

[Jim Duuuude]

Documentation?? What documentation?? :-)

use the actual DTMF characters that you would use on the radio, such as:

startup_macro=*32000

that would make your system connect to node 2000 upon startup

From: doug at crompton.com
To: app_rpt-users at ohnosec.org
Date: Fri, 15 Aug 2014 18:45:23 -0400
Subject: [App_rpt-users] startup_macro




I have a question on the startup_macro and calling a system script. The following does not seem to work. How do you call a system command from startup_macro? Perhaps the cmd, is left off? This does not seem clear in the documentation. I never really had a need to use this until lately.

startup_macro=cmd,/etc/asterisk/some_script
73 Doug
WA3DSP
http://www.crompton.com/hamradio
 		 	   		  

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140815/634814c9/attachment.html>