[App_rpt-users] pfsense router?

[Michael Wolthuis]

Tim,
I run PFSense with many of my Allstar nodes.  I have to set STATIC outbound
NAT for the specific IP addresses that are Asterisk.  This will cause them
to not pick random ports outbound.

I am not sure what iax2 show registry does, but I could not get it to work
until I put in a static NAT outbound.

Here is a copy of my outbound NAT statement for one of my nodes:

WAN  172.16.12.22/32udp/4569*udp/4569WAN address*YES

I believe the key is the last YES, which is the STATIC PORT heading.

Hope that helps,
Mike
kb8zgl


From:  Tim Sawyer <tim.sawyer at mac.com>
Date:  Friday, August 22, 2014 at 10:52 AM
To:  "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject:  [App_rpt-users] pfsense router?

Is anyone using a pfsense router in your Asterisk network? While app_rpt
seems to work fine it shows a weird port, not 4569, with ³iax2 show
registry². I assume pfsense is doing something weird with NAT that I don¹t
understand. Can anyone shed some light on this subject?



--
Tim WD6AWP

_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button" You do not need a password to unsubscribe, you can
do it via email confirmation. If you have trouble unsubscribing, please send
a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140822/1cd3ecdb/attachment.html>