[App_rpt-users] Telemetry question

Corey Dean n3fe at repeater.net
Fri Aug 29 18:49:43 UTC 2014


Thank you.  This is what I was looking for.

Sent from my iPhone

> On Aug 29, 2014, at 2:40 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> Corey,
> 
> Put the following in the node stanza(s) you want to control in rpt.conf
> 
> holdofftelem=1
> telemdefault=2
> 
> This will report local connects and disconnects but will mute others after a short time period. So on a real busy channel when you do a local connect you might hear other connect/disconnects for a short period therafter but then they will stop. The time is not documented but you could find it in the source. I think it is around 30 seconds to a minute.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> Date: Fri, 29 Aug 2014 13:10:25 -0400
> From: n3fe at repeater.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Telemetry question
> 
> A while back someone posted this is an email but I can't find it...
> 
> There was a setting in the rpt.conf file that would allow local telemetry only.  Basically I want to hear all the local connects and disconnects but I do not wish to hear all the remote ones.  I had this setup on my portable node, but have since wiped the system.  It was the only system I did not have a backup off..
> 
> It was two different settings I had to use.
> 
> Could someone please post those setting again.
> 
> Corey  N3FE
> 
> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140829/64df6a2b/attachment.html>


More information about the App_rpt-users mailing list