[App_rpt-users] Send 3khz tone

[Tim Sawyer]

Yep, there’s a really good way to do that. Add a 989=cop,4 to your [functions] stanza. Then you can do *989 and it will make a test tone for as long as you want. Press # to stop when you’re done.

--
Tim WD6AWP

> On Aug 30, 2014, at 7:43 PM, Skyler F <electricity440 at gmail.com> wrote:
> 
> HI,
> 
> I want to do some testing with a service moniter on TX by sending a 3khz tone. The problem about the one on the radio tune menu is that they are too short pulses. Is there anything a bit slower/longer tone that I could use like a sound file or something?
> 
> Thanks,
> 
> 73,
> 
> Skyler , KDØWHB
> 
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info/>
> KDØWHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140830/2b8b6d12/attachment.html>