[App_rpt-users] Registration

[Lu Vencl]

Ok, so here is the latest.

I discovered that the port # (which I did change earlier) is not updating on
the rpt_extnodes file. It still shows 14569.

On the local node 27976, it does show the correct node port # as registered
in the rpt_extnodes file, so I went ant took another one my nodes and try to
see what it shows and it also shows the wrong port #.

So I think there is something going on with the allstar server.

Unless I am missing something here, I think this might require Jim or an
admin to take a look?

Or does this only update every few hours now?  I thought it was like every
15 minutes or so? But I would have thought that upon registration, the file
on the allstar server would update immediately and then all the nodes would
grab the file every 15-30 minutes or so.. If someone could confirm. Thanks

 

 

27976=radio at 63.231.96.56:
<mailto:27976=radio at 63.231.96.56:14569/27976,63.231.96.56>
14569/27976,63.231.96.56

 

Should be:  27976=radio at 63.231.96.56:4569/27976,63.231.96.56
<mailto:27976=radio at 63.231.96.56:4569/27976,63.231.96.56> 

 

On the affected now, 27976:

asterisk -rx 'iax2 show registry'; ll /var/lib/asterisk

Host                  dnsmgr  Username    Perceived             Refresh
State

67.215.233.178:4569   N       27976       63.231.96.56:4569          60
Registered

Lu

KA4EPS

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140831/8aea81f0/attachment.html>