[App_rpt-users] USBRado

[barbagris]

Hello Angelo
I use a GM300 and I have this setup working perfectly, you have to try it occurs.
Merry Christmas.
Regards
John
ea2bkh



hdwtype=0 

rxboost=1

txboost=1

rxctcssrelax=1

txctcssdefault=88.5

rxctcssfreqs=88.5

txctcssfreqs=88.5

;rxctcssoverride=0

carrierfrom=usbinvert

ctcssfrom=no

rxdemod=flat

txprelim=yes

txlimonly=no

txtoctype=notone

txmixa=composite

txmixb=0

invertptt=0

duplex=0

rxondelay=0

rxnoisefiltype=0

eeprom=0

  ----- Original Message ----- 
  From: Angelo Glorioso 
  To: APP RPT 
  Sent: Monday, December 22, 2014 5:50 PM
  Subject: [App_rpt-users] USBRado


   Happy Holidays All!!


   We are trying to get a node back up after reformatting the hard drive and we are not having much luck.

   We are wrired according to the web site to a URI and a Motorola GM300 for a simplex node going to a repeater.
  The rig: Motorola GM300

  Wired as follows and verified:
  Radius/Maxtrac series with 16 pin accessory
  connector - Simplex - Processed audio

  URI 20 - Radius 7
  URI 21 - Radius 11
  URI 22 - Radius 2
  URI 1 - Radius 3
  URI 8 - Radius 8 (COR/CTCSS Det.)

  Radius Must be programmed to output COR/CTCSS det. on
  pin 8 of accessory connector, and JU551 in position 'B'
  (de-emphasized audio out).



  We have no problem with the transmit audio, but we are unable to get any type of recieve audio into the URI unless we
  we select no CTSSS tone. If this setting the COS/audio never drops at all. Says keyed up. 

   The radio is set for 103.5pl both transmit and receive.  Here is our USBRADIO.CONF.

  Any help would be appreciated.

  [general]

  [usb41456]

  hdwtype=0 

  rxboost=1

  txboost=1

  rxctcssrelax=1

  txctcssdefault=103.5

  rxctcssfreqs=103.5

  txctcssfreqs=103.5

  ;rxctcssoverride=0

  carrierfrom=usbinvent

  ctcssfrom=dsp

  rxdemod=speaker

  txprelim=yes

  txlimonly=no

  txtoctype=notone

  txmixa=composite

  txmixb=no

  invertptt=0

  duplex=0

  rxondelay=0

  rxnoisefiltype=0

  eeprom=0



  73 de Angelo







------------------------------------------------------------------------------


  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141222/0d839ac0/attachment.html>