[App_rpt-users] USBRado

[Angelo Glorioso]

First off,

 I would like to thank all who replied. Will try all suggestion later today. Hopefully we can get this fixed asap.

73 de Angelo

Happy Holidays All!!!



  ----- Original Message ----- 
  From: Angelo Glorioso 
  To: APP RPT 
  Sent: Monday, December 22, 2014 10:50 AM
  Subject: USBRado 


   Happy Holidays All!!


   We are trying to get a node back up after reformatting the hard drive and we are not having much luck.

   We are wrired according to the web site to a URI and a Motorola GM300 for a simplex node going to a repeater.
  The rig: Motorola GM300

  Wired as follows and verified:
  Radius/Maxtrac series with 16 pin accessory
  connector - Simplex - Processed audio

  URI 20 - Radius 7
  URI 21 - Radius 11
  URI 22 - Radius 2
  URI 1 - Radius 3
  URI 8 - Radius 8 (COR/CTCSS Det.)

  Radius Must be programmed to output COR/CTCSS det. on
  pin 8 of accessory connector, and JU551 in position 'B'
  (de-emphasized audio out).



  We have no problem with the transmit audio, but we are unable to get any type of recieve audio into the URI unless we
  we select no CTSSS tone. If this setting the COS/audio never drops at all. Says keyed up. 

   The radio is set for 103.5pl both transmit and receive.  Here is our USBRADIO.CONF.

  Any help would be appreciated.

  [general]

  [usb41456]

  hdwtype=0 

  rxboost=1

  txboost=1

  rxctcssrelax=1

  txctcssdefault=103.5

  rxctcssfreqs=103.5

  txctcssfreqs=103.5

  ;rxctcssoverride=0

  carrierfrom=usbinvent

  ctcssfrom=dsp

  rxdemod=speaker

  txprelim=yes

  txlimonly=no

  txtoctype=notone

  txmixa=composite

  txmixb=no

  invertptt=0

  duplex=0

  rxondelay=0

  rxnoisefiltype=0

  eeprom=0



  73 de Angelo




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141222/8ea388e3/attachment.html>