[App_rpt-users] Error Message When Attempting to Connect to my hub

[mike at midnighteng.com]

David,

I think we need more info for that.

but -Check your iax.conf 

for a registration type error,

make sure your not using the same udp port on both servers

Make sure the udp ports are not being used by other devices on your
network.

Check to see if you are actually registered on allstar.(may provide
insight)


...mike/kb8jnm





> -------- Original Message --------
> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect to
> my hub
> From: David Dean <david at k0pwo.com>
> Date: Sat, December 27, 2014 8:48 pm
> To: Jim Duuuude <telesistant at hotmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> 
> 
> Ok I understand that and will make those changes but I am still unable to connect to other nodes outside of my lan. Any thoughts on that. 
> 
> Sent from my iPhone
> 
> > On Dec 27, 2014, at 6:41 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> > 
> > Dude,
> > 
> > put:
> > 
> > 40968 = radio at 192.168.20.1/40968,NONE
> > 
> > in the [nodes] section of rpt.conf.
> > 
> > Obviously, you have 2 app_rpt servers on the same LAN (behind the same NAT).
> > This, and a line in the OTHER server's rpt.conf (that will allow connections the other way),
> > is necessary in this type of configuration.
> > 
> > Jim
> > 
> > From: david at k0pwo.com
> > To: app_rpt-users at ohnosec.org
> > Date: Sat, 27 Dec 2014 18:09:13 -0700
> > Subject: [App_rpt-users] Error Message When Attempting to Connect to my hub
> > 
> > I copied an error message I am getting on the CLI of my Hub Node when I attempt to connect from my Repeater Node. I have been unable to connect to any other nodes for a while. I am not sure what changed but suddenly I could not connect to anyone any more.
> > 
> >  
> > 
> > I copied and pasted the error message below in hopes that someone could point me in the right direction in finding the problem. I am guessing it has something to do with my router or modem.
> > 
> >  
> > 
> > I currently use a ASUS RT-AC68U router which is provided IP from a Comcast supplied modem/router that is bridged so that its only a modem. I also have a cisco switch that I plug all my hardware into.
> > 
> >  
> > 
> > Any help would be greatly appreciated.
> > 
> >  
> > 
> > Connected to Asterisk  currently running on K0PWO_Hub (pid = 2372)
> > 
> > Verbosity is at least 3
> > 
> >     -- Accepting UNAUTHENTICATED call from 192.168.20.1:
> > 
> >        > requested format = gsm,
> > 
> >        > requested prefs = (gsm|g726aal2|ulaw),
> > 
> >        > actual format = g726aal2,
> > 
> >        > host prefs = (g726aal2|gsm),
> > 
> >        > priority = mine
> > 
> >     -- Executing [41488 at radio-secure:1] Rpt("IAX2/192.168.20.1:4569-1947", "4148      8") in new stack
> > 
> > [Dec 27 16:33:51] WARNING[2930]: app_rpt.c:22704 rpt_exec: Node 40968 IP 73.169.      7.203 does not match link IP 192.168.20.1!!
> > 
> >   == Spawn extension (radio-secure, 41488, 1) exited non-zero on 'IAX2/192.168.2      0.1:4569-1947'
> > 
> >     -- Hungup 'IAX2/192.168.20.1:4569-1947'
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > David Dean, K0PWO
> > 
> >  
> > 
> > Arapahoe County Colorado
> > 
> > (720) 350-2053 cell
> > 
> > (720) 207-9030 fax
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > 
> > _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<hr>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.