[App_rpt-users] App_rpt-users Digest, Vol 60, Issue 3

[Matthew Pitts]

Tim,

The way I understand it, he was asking if he needed two or four RTCM's to configure the TWO split site repeaters separately. I could be wrong, though.

Matthew Pitts
N8OHU


 



________________________________
 From: Tim Sawyer <tim.sawyer at mac.com>
To: Steve Wright <stevewrightnz at gmail.com> 
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org> 
Sent: Sunday, February 2, 2014 6:22 PM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 60, Issue 3
 


Judging from the folks numerous attempts to answer your question each with different answers, maybe it isn’t so clear what you want to do. It might help if you give example frequencies and a detailed description. 

For example:
Lets say you have site A where 146.52 RX repeats mobiles to 52.525 TX. 

And you have site B where 52.54 RX repeats mobiles to 147.42 TX. 

An RTCM at each site will make a cross band repeater at each site, and you could link the two sites together via IP. This is not voting or simulcast, just two linked repeaters. Of course, there has to be a server (on the ground or one of the sites) where the RTCMs log in. That’s not split site repeater. A split site repeater is single repeater where the RX and the TX are in the same band on separate sites with a link in between. This is typically done only on 6M (both RX and TX) repeaters because it’s so expensive to duplex on 6M.

--
Tim
:wq 

On Feb 1, 2014, at 11:46 PM, Steve Wright <stevewrightnz at gmail.com> wrote:

It's perfectly clear what I am doing.
>
>
>Theres a split site 2m repeater, AND a split site 6m repeater.
>
>
>The transmitters for each repeater are on the OTHER site.
>
>
>Linking is done with outdoor wireless ethernet.
>
>
>Site "A" (6m TX and 2m RX)
>
>
>Site "B" (6m RX and 2m TX)

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140202/b3a0ed80/attachment.html>