[App_rpt-users] Parallel 900MHz Links

[Corey Dean]

The Xipar package does single shot if anyone wanted to play with that!

Corey  N3FE

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Brett Friermood
Sent: Friday, February 07, 2014 3:49 PM
To: DougH
Cc: app_rpt-users at ohnosec.org; Bob - AF6D
Subject: Re: [App_rpt-users] Parallel 900MHz Links

Myself and probably many others would too. Might I suggest getting it to the Repeater Builder guys? They are usually very happy to get information such as that and can get it on their site for all to see.

Brett KQ9N


On Fri, Feb 7, 2014 at 10:03 AM, DougH <specialq.que at ntlworld.com> wrote:
> Hello Bob es Bob,
>
> I would be interested to read the information Bob. Perhaps another 
> consideration might be the use of passive antennas too get round the 
> LoS problem(s).
>
> Regards,
> Doug - GM7SVK
>
>
> ----- Original Message ----- From: "Bob" <kk6ecm at gmail.com>
> To: "'Bob - AF6D'" <bob at af6d.com>; <app_rpt-users at ohnosec.org>
> Sent: Friday, February 07, 2014 3:38 PM
> Subject: Re: [App_rpt-users] Parallel 900MHz Links
>
>
>> Not knowing your particular situation, I offer this experience for 
>> your consideration. We are using a 70cm audio link between two 
>> repeaters about
>> 20
>> miles apart with about a 200m obstruction about half way in between. 
>> The obstruction is a saddle between the mountains that has a well 
>> defined ridge... pseudo knife edge? Turns out this is an optimum 
>> condition for 70cm with an obstruction, and works quite well. I found 
>> an article on the web written by a couple solders who developed the 
>> rules of thumb for this configuration in the field to get 
>> connectivity between sites in the mountains. I can send it out... not 
>> sure if the list can handle an enclosure, and don't want to stuff it 
>> in every ones' email box if they are not interested.
>>
>>
>>
>> Thanks,
>>
>> Bob
>>
>> kk6ecm
>>
>>
>>
>>  _____
>>
>> From: app_rpt-users-bounces at ohnosec.org 
>> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bob - AF6D
>> Sent: Friday, February 07, 2014 12:02 AM
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Parallel 900MHz Links
>>
>>
>>
>> We are finally at the last phase of our build-out with three repeater 
>> locations with minimal overlap. We want to vote and simulcast on 2 meters.
>> I
>> asked how I could get IRLP and EchoLink connected, as well as a 
>> weather receiver and it was suggested that I get an unvoted URI for a 
>> controller (like the RC-210's that we have) and use them to bring in outside sources.
>> That was a great idea! But then it dawned on us that if in the event 
>> of a major earthquake or tornado or whatever the Internet would go 
>> down - and those sources too.
>>
>>
>>
>> This became even more of an important matter because we want to run a 
>> parallel 900MHz link system. We can't use the RC-210 approach because 
>> if the internet goes down so would our link. The repeaters are too 
>> far apart for building our own Ubiquity VLAN - I think. I don't know 
>> the maximum power available at 900MHz and we don't have LOS between 
>> the sites.
>>
>>
>>
>> What are some ideas on getting a parallel link system in case we lose 
>> Allstar?
>>
>>
>>
>> Thank you for helping me learn.
>>
>>
>>
>> Bob
>>
>>
>
>
> ----------------------------------------------------------------------
> ----------
>
>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


--
This message has been scanned for viruses and dangerous content, and is believed to be clean.

Click here to report this message as spam.
http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=5732F80411.A45AF&token=73c3bb1a3f9bfbfa490e82f03828efb8



--
This message has been scanned and is believed to be clean.