[App_rpt-users] WinSCP and ACID

[kk6ecm]

That is what I'm doing... I thought it should work given my experience with Pickle and the Beagle Board.

Sent from iPad


On Feb 10, 2014, at 8:48 PM, Chris Andrist <chris at yeahmon.net> wrote:

> Bob,
> 
> If you are using ACID you should be connecting to port 222 and make sure you choose scp. This is standard for ACID installs.
> 
> Regards,
> 
> Chris Andrist, KC7WSU
> 
> 
> On Feb 10, 2014, at 7:17 PM, kk6ecm <kk6ecm at gmail.com> wrote:
> 
>> 
>> I use WinSCP with Pickle on my Beagleboard-xm, but cannot use it with ACID. I'm looking for setup requirements for ACID. SSH works just fine. I'm looking at sshd_config... I may find it there. Any insights would be appreciated.
>> 
>> Thanks,
>> Bob
>> kk6ecm
>> 
>> Sent from iPad
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.