[App_rpt-users] Touch Tones

[Buddy Brannan]

Wouldn’t it have to be *4[node number] to guarantee that you’re commanding the right node? *4 is the command to send commands to a remote node, thus *40 would specify to control the most recently connected node, is that not correct? Or did I get the wrong end of this?

On Feb 20, 2014, at 8:00 AM, Jon Rorke <jrorke at cogeco.ca> wrote:

> This article does not tell the whole story on propagate DTMF.
> 
> The statement::
> propagate_dtmf=yes
> 
> Must be in the node stanza of the node you want to generate DTMF. 
> But the actual command prefix is not mentioned in the article.
> So if you have this set up in your node and then at the cli you send : 
> 
> rpt fun (node) X40(DTMF sequence)
> 
> The *40 is the command prefix needed to be sent before and DTMF tones. 
> I thought for years that this didn't work until Tim K4KWQ pointed out the command prefix. 
> Its the missing piece of the puzzle
> 
> With this I can command a hardware controller via the Allstar node connected to it.
> 
> Jon VA3RQ
> 
> 
> On 2/19/2014 10:55 PM, Chris Andrist wrote:
>> Here is the documentation on it. http://ohnosec.org/drupal/node/134
>> 
>> --
>> Regards,
>> 
>> Chris Andrist, KC7WSU
>> 
>> On Feb 19, 2014, at 8:53 PM, "David Powell-Williams" <dpowellwilliams at shaw.ca> wrote:
>> 
>>> Perhaps 'propagate_dtmf=yes' (!= propogate)
>>> 
>>> 73,
>>> David
>>> VE7MQ
>>> 
>>> 
>>> ---
>>> This email is free from viruses and malware because avast! Antivirus protection is active.
>>> http://www.avast.com
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> 
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> 
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.