[App_rpt-users] Touch Tones

Fri Feb 21 13:55:31 UTC 2014

Thanks Mike. I will keep this in mind.

----- Original Message ----- 
From: mike at midnighteng.com
To: app_rpt-users at ohnosec.org
Sent: Thursday, February 20, 2014 10:32 AM
Subject: Re: [App_rpt-users] Touch Tones

Tim and Angelo,

Can you make some macros and use ilink commands 200-215 to generate dtmf 
strings ? Could give you limited functionality. ???

It has been a bit of a standard with other controllers that to pass dtmf 
through, you just needed to start with a "#" and later digits would pass.
Any chance we could have that functionality?

...mike/kb8jnm

-------- Original Message --------
Subject: Re: [App_rpt-users] Touch Tones
From: Angelo Glorioso <n5uxt at hotmail.com>
Date: Thu, February 20, 2014 11:09 am
To: "Tim Sawyer" <tim.sawyer at mac.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>

Yes I have. It does not support the radio I want to use. You would think
passing tones via RF would be an easy thing to do.

----- Original Message ----- 
From: "Tim Sawyer" <tim.sawyer at mac.com>
To: "Angelo Glorioso" <n5uxt at hotmail.com>
Cc: "Buddy Brannan" <buddy at brannan.name>; "app_rpt mailing list"
<app_rpt-users at ohnosec.org>
Sent: Thursday, February 20, 2014 10:03 AM
Subject: Re: [App_rpt-users] Touch Tones

App_rpt supports some HF radios. http://ohnosec.org/drupal/node/191 Have you
looked into doing it that way?

--
Tim
:wq

On Feb 20, 2014, at 7:56 AM, Angelo Glorioso <n5uxt at hotmail.com> wrote:

> Well, If I wanted to control another remote base (HF) outside of asterisk,
> it would require that tones be passed over there air. Command line would
> not work.
>
>
> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com>
> To: "Angelo Glorioso" <n5uxt at hotmail.com>
> Cc: "Buddy Brannan" <buddy at brannan.name>; "app_rpt mailing list"
> <app_rpt-users at ohnosec.org>
> Sent: Thursday, February 20, 2014 9:44 AM
> Subject: Re: [App_rpt-users] Touch Tones
>
>
> Understood. How about having a command or two that would send the TTs you
> want? http://ohnosec.org/drupal/node/94
>
> --
> Tim
> :wq
>
> On Feb 20, 2014, at 7:21 AM, Angelo Glorioso <n5uxt at hotmail.com> wrote:
>
>> Hi Tim,
>>
>> Thanks all for the replies. I was trying to pass the tones via RF. Not to
>> the next node per say.
>>
>> 73 de Angelo
>>
>>
>> ----- Original Message ----- From: "Tim Sawyer" <tim.sawyer at mac.com>
>> To: "Buddy Brannan" <buddy at brannan.name>
>> Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
>> Sent: Thursday, February 20, 2014 9:10 AM
>> Subject: Re: [App_rpt-users] Touch Tones
>>
>>
>> Yes, Buddy you have it right. Let’s break it down:
>>
>> * is the prefix, AKA the function (or start) character.
>> http://ohnosec.org/drupal/node/133
>>
>> 4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21
>>
>> 0 is a shortcut for last node number
>>
>> So for propagate_dtmf to work you have to connect to the remote node and
>> then go into command mode.
>>
>> --
>> Tim
>> :wq
>>
>> On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy at brannan.name> wrote:
>>
>>> Wouldn’t it have to be *4[node number] to guarantee that you’re
>>> commanding the right node? *4 is the command to send commands to a
>>> remote node, thus *40 would specify to control the most recently
>>> connected node, is that not correct? Or did I get the wrong end of this?
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
>> to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
the bottom of the page. Enter your email address and press the "Unsubscribe 
or edit options button"
You do not need a password to unsubscribe, you can do it via email 
confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
the bottom of the page. Enter your email address and press the "Unsubscribe 
or edit options button"
You do not need a password to unsubscribe, you can do it via email 
confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem. 