[App_rpt-users] No TX through URI

[Doug Crompton]

When your node is transmitting the red light on the URI should light solid. If you see this then PTT should be asserted on the PTT pin on the URI pin 1. You can test this by issuing commands in the client -

asterisk -rvvv

(if using usbradio)

radio key (or unkey)

(OR if using simpleusb)

ausb key (or unkey)

If that isn't working then the audio is not going to work or at least you are not going to hear it.  Is the PTT working as per this test?

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Thu, 27 Feb 2014 09:36:56 -0800
> From: scott at k7rsw.us
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] No TX through URI
> 
> I just put together a Allstar node and connected it to a local uhf repeater.
> I am using a DMK URI and interface cable connected to a RLC controller 
> (club deluxe 2)
> 
> The system works well on incoming traffic from the node, but will not 
> pass ptt or outgoing audio from the repeater.
> I have checked the configuration on the controller port and it all looks 
> ok.
> 
> I need some help?
> 
> Scott
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140227/9c2e6282/attachment.html>