[App_rpt-users] Parallell Port PTT Issue

[James Hill]

Thanks guys, all sorted!

James


On Thu, Jan 2, 2014 at 12:58 PM, Corey Dean <n3fe at repeater.net> wrote:

> For now you could call a startup-macro that plays the cw id....
>
> Corey N3FE
> ________________________________________
> From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org]
> On Behalf Of James Hill [g0fhmuk at gmail.com]
> Sent: Thursday, January 02, 2014 7:45 AM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Parallell Port PTT Issue
>
> Hi Guys,
>
> My modified CM108 suffered a catastrophic failure yesterday (one of the
> 3.5mm jacks broke off the board), and for the time being I've had to resort
> to parallell port PTT switching.
>
> It works fine - But I have an issue where when I start the node up, the
> PTT is being held open until such a time as the node sends a CW ID, and
> then it will drop after the ID.
>
> This is far from ideal, as the TX can be held open for up to 15 minutes at
> a time!
>
> Is there a known fix for this? or can I setup a cron/scheduler event to
> send a one off CWID, say 10 seconds after initialisation to make the PTT
> drop?
>
> If the answer is yes, then how do I do it?
>
> Thanks,
>
> James - 29681
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140102/28620cf2/attachment.html>