[App_rpt-users] Incoming connects

Doug Crompton doug at crompton.com
Sun Jan 12 03:21:38 UTC 2014


OK I think this is solved. Unfortunately it is hard to diagnose all problems when you have an inexperienced person at the other end. 

It turns out the router was forwarding the right port BUT it was set to tcp instead of udp.  I had gone over this several times with the operator and I had thought it was right but when we looked at it again it was wrong.

When set in the tcp mode it did accept connections but only for a short window of time after a prior disconnect from the other direction.

Thanks for all the input and sorry to cause all the back and forth on this. I learned that you have to be extremely concise when dealing with someone remotely who is inexperienced! 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Subject: Re: [App_rpt-users] Incoming connects
From: tim.sawyer at mac.com
Date: Fri, 10 Jan 2014 20:29:46 -0800
CC: app_rpt-users at ohnosec.org
To: doug at crompton.com

Do a “tcpdump port 4569” at the Linux command line and incite a connect from another node. You should see inbound packets.
I have seen ISP’s block port 4569 but not FiOS. I’m on FiOS with an actiontek router and it works fine.

--
Tim
:wq


On Jan 10, 2014, at 7:41 PM, Doug Crompton <doug at crompton.com> wrote:I am remotely trying to troubleshoot a friends new Allstar installation.  I can ssh in and connect out to nodes but I cannot connect in to the system from external nodes. Port 4569 is forwarded.

I discovered this link -

http://www.voip-info.org/wiki/view/IAX

about consistent NAT and I was wondering if that might be the problem.

I was able to connect in one time right after a reboot which might support the NAT issue.

The router is an Actiontek MI424WR GigE  as supplied by Verizon on their FIOS system.

Is anyone else having a problem with this router or have any ideas on this? 
Nothing is logged at the server or shows up in the client on the system which kind of points to a routing failure.

Is there a good way to check for open port 4569 as I don't think normal port scan programs will check this.

73 Doug
WA3DSP
http://www.crompton.com/hamradio
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140111/2f9736c2/attachment.html>


More information about the App_rpt-users mailing list