[App_rpt-users] app_rpt statistics
Doug Crompton
doug at crompton.com
Sun Jan 12 05:20:11 UTC 2014
Bob,
Not exactly sure what your wanting but the following at the linux command prompt will save the stats to a file -
asterisk -rx "rpt stats 27225" > 27225stats
cat 27225stats
************************ NODE 27225 STATISTICS *************************
Selected system state............................: 0
Signal on input..................................: NO
System...........................................: ENABLED
Parrot Mode......................................: DISABLED
Scheduler........................................: ENABLED
Tail Time........................................: STANDARD
Time out timer...................................: ENABLED
Incoming connections.............................: ENABLED
Time out timer state.............................: RESET
Time outs since system initialization............: 0
Identifier state.................................: CLEAN
Kerchunks today..................................: 0
Kerchunks since system initialization............: 949
Keyups today.....................................: 4
Keyups since system initialization...............: 15773
DTMF commands today..............................: 0
DTMF commands since system initialization........: 89
Last DTMF command executed.......................: 329971
TX time today....................................: 00:01:53.172
TX time since system initialization..............: 70:17:18.962
Uptime...........................................: 456:34:43
Nodes currently connected to us..................: 28190, 29971, 28795
Autopatch........................................: ENABLED
Autopatch state..................................: DOWN
Autopatch called number..........................: N/A
Reverse patch/IAXRPT connected...................: DOWN
User linking commands............................: ENABLED
User functions...................................: ENABLED
You could make up a script to do this and then email the file somewhere. It could be done periodically by a cron job.
My lsnodes program also displays this status to a web page -
http://crompton.com/hamradio/allstar/lsnodes.html
73 Doug
WA3DSP
http://www.crompton.com/hamradio
From: kk6ecm at gmail.com
To: app_rpt-users at ohnosec.org
Date: Sat, 11 Jan 2014 20:46:26 -0800
Subject: [App_rpt-users] app_rpt statistics
I’m looking for a way to capture and
e-mail repeater useage statistics. In searching through app_rpt.c, I found the
following.
>From app_rpt.c
myrpt->dailytxtime
= 0;
myrpt->totaltxtime
= 0;
myrpt->dailykeyups
= 0;
myrpt->totalkeyups
= 0;
myrpt->dailykerchunks
= 0;
myrpt->totalkerchunks
= 0;
myrpt->dailyexecdcommands
= 0;
myrpt->totalexecdcommands
= 0;
My next questions is what is the form of
an rpt.conf stanza that could utilize these variables, capturing these
statistics?
Is there a way of saving these statistics
to a log file, or perhaps a way to send by e-mail from the repeater to my
e-mail address?
Thanks,
Bob
kk6ecm
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140112/0c930dc4/attachment.html>
More information about the App_rpt-users
mailing list