[App_rpt-users] Telemetry Help

[Doug Crompton]

Putting these two lines in your node stanza or stanzas in rpt.conf will probably do what you want -
holdofftelem=1
telemdefault=2

http://ohnosec.org/drupal/node/110

http://ohnosec.org/drupal/node/102

http://ohnosec.org/drupal/node/103


73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: allstarlink at mcleanzone.com
To: mike at midnighteng.com; App_rpt-users at ohnosec.org
Date: Fri, 17 Jan 2014 22:16:47 -0600
Subject: Re: [App_rpt-users] Telemetry Help

Robert, Te stop hearing remote telemetry you just need to disable it. Add these lines to your rpt.conf under the functions stanza. [functions] it may read [functions28183]901=cop,33              ; Local telemetry output enabled902=cop,34              ; Local telemetry output disabled903=cop,35         ; Local telemetry output timed Remote (when anybody connects/disconnects from xxxxx Only) You can also put that into your startup script to stop it from ever happening. [28183] startup_macro=*903#rxchannel = Radio/usb28183       ; Rx audio/ signaling channel If you ever want to re-enable it, just do a *901  Thank you,Fred McLeanAllStar 29503832-948-5200   From: mike at midnighteng.com [mailto:mike at midnighteng.com] 
Sent: Friday, January 17, 2014 7:23 PM
To: App_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Telemetry Help  You have no control of announcements from other nodes you are connected to. If you think about that, others telemetry is important to know if you are going to be connected to them. Otherwise, you could interfere with pending operations.  ...mike/kb8jnm -------- Original Message --------
Subject: [App_rpt-users] Telemetry Help
From: W2YMM <w2ymm1 at gmail.com>
Date: Fri, January 17, 2014 5:37 pm
To: App_rpt-users at ohnosec.orgHello, I wanted to know if there is a way to shut off or limit announcements that I hear on my Allstar node.When connected to a large hub I very often hear "Remote Already In This Mode" and I'll hear when stations connect and Disconnect from each other, or if a call fails.I'd like to turn that off, but can't seem figure out where to do it.I looked at the Telemetry section here    http://ohnosec.org/drupal/node/102
but It doesn't look like anything on my node.. At least in /etc/asterisk/rpt.conf

Any help would be greatly appreciated.Thanks
Robert Prybyzerski JrW2YMM
631-960-1051
http://www.w2ymm.comAllstar 28183_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140118/c73e4e06/attachment.html>