[App_rpt-users] Node numbering

[Buddy Brannan]

IRLP nodes did, indeed, used to be in the 4XXXXX range, until 2010 or whenever when Dave asked that IRLP no longer be supported by app_rpt. At which time I sold my IRLP board and pulled my IRLP node. (I will end there before going on to my usual grumbling about IRLP.)
On Jan 21, 2014, at 6:54 AM, REDBUTTON_CTRL <jrorke at cogeco.ca> wrote:

> If I remember IRLP nodes embedded in Ap_Rpt were prefixed with a 4. 
> 
> This may simply be a private node perhaps?
> 
> VA3RQ
> 
> On 1/21/2014 2:44 AM, Doug Crompton wrote:
>> Are IRLP nodes listed with a preceding '8' ?  The reason I ask is that the following showed up in a node listing
>> 
>> ************************* CONNECTED NODES *************************
>> 
>> T27133, T29228, T29331, T29477, T29980, T89109
>> 
>> It would make sense that the 89109 was IRLP reflector 9109
>> 
>> If so I want to annotate that in my lsnodes script.
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> 
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> 
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.