[App_rpt-users] How to keep / restart connection failures

[Keith Goobie]

This is a way to make the link persistent, in rpt.conf, set the following:

rpt.conf:970=ilink,13 ; Permanently connect specified link -- transceive

Then put in a start up macro in rpt.conf and you are set.

You do not have to use 970, tht is the sysop choice.

Keith
VA3YC

On 1/21/14 3:12 PM, "buck" <buck at thebghouse.org> wrote:

> 
> Hi,
>  
> We have 2 nodes connected over a microwave link. The link is very stable but
> occasionally the nodes disconnect due to network instability.
>  
> Can I change the retry counts or failure times between nodes?
>  
> Has someone written a script that run under cron to check and re-connect nodes
> that drop?
>  
> Thanks,
> Birton, N6UG
>  
> Nodes:
> 27035
> 27283
> 28138
> Š.
>  
>  
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140121/049a5545/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpg
Type: image/jpeg
Size: 2950 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140121/049a5545/attachment.jpg>