[App_rpt-users] rpt.conf

[Geoff]

On 01/22/2014 11:13 AM, Tim Sawyer wrote:
> Good point. And the telemetry stanza comments say:
>
> ; Telemetry entries can be shared across all repeaters, or defined for each repeater.
>
> So I’d say you CANNOT have separate morse stanzas.
>

Well... kinda...

Technically, yes - (from my experience) only one morse stanza can be 
defined, but different ID strings can be entered for each node.

What's funny is, (it's really comical) my node 29657 (simplex node) is 
the *3rd* node defined in rpt.conf.
If I key up the simplex node *first*, upon asterisk re-start, then the 
morse stanza for 29657 is used through out rpt.conf.

Meaning
[morse29655]
speed=20                ; Approximate speed in WPM
frequency=500           ; Morse Telemetry Frequency
amplitude=2048          ; Morse Telemetry Amplitude
idfrequency=1000        ; Morse ID Frequency
idamplitude=2048        ; Morse ID Amplitude

[morse29657]
speed=20                ; Approximate speed in WPM
frequency=1000           ; Morse Telemetry Frequency
amplitude=2048          ; Morse Telemetry Amplitude
idfrequency=500         ; Morse ID Frequency
idamplitude=1026        ; Morse ID Amplitude

if I key up 657 first, then the ID frequency is low and subdued, and the 
telmetry CW strings are ear-piercing .
If I key up 655 first, the ID frequency is high and piercing, and the 
telemtry CW strings are low and subdued.

It makes a difference.

-Geoff/W5OMR