[App_rpt-users] adding a node

[pete M]

on the asterisk cli you need to specify wich node is being tuned.

to do so at first before doing any tuning type : radio active usbXXXXX  were xxxxx is the node you work on...

to confirm type radio tune at the cli it will list you the commnd you can do and the node its selected.



Envoyé de mon iPad

> Le 2014-01-19 à 16:18, "Geoff" <ars.w5omr at gmail.com> a écrit :
> 
> My node 29655 has been working, and things are great, having fun with courtesy tones, wait-times, etc...
> 
> Had 29656 configured to be the echolink node... echolink connects are great - even have the system spitting out callsigns of echolink connections (that are allowed), and things have been great!
> 
> 
> ... until ....
> 
> Today, I built a cable for a 2nd URIx to Kenwood TMV-7a, using the packet port.
> 
> That's not the issue.
> 
> Issue is when I plugged in the 2nd URIx.  radio-tune-menu thinks it's 29656!
> 
> How do I tell asterisk that it's supposed to be 29657?
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.