[App_rpt-users] RTCM Question

[41.2 Jim]

no I haven't firmware1.39 I will update



   Jim Frederick KF6QBW
446.600-  100.0 PL Repeater
     AllStar Node # 28839
         Skype = jim41.2


On Tue, Jan 28, 2014 at 7:55 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> No there is no setting like that for RTCMs. RTCMs do have very sensitive
> squelch. I usually set the squelch five turns beyond threshold. The squelch
> value on menu 98 should be around 350 to 400.
>
> It works very much like MICOR squelch. Quick keying or a weak signal will
> cause a long squelch tail. A full quieting signal will no squelch tail.
> Most of the time all you'll hear is Mic click even on users with no reverse
> burst.
>
>
> --
> Tim
> :wq
>
> On Jan 27, 2014, at 6:43 PM, 41.2 Jim <41.2jim at gmail.com> wrote:
>
> >  Question.... is their anything that is universal to both Stanzas,
> "usbradio.conf & voter.conf" that can be used with an RTCM like say ....
> rxsquelchdelay=xx or rxondelay=xx as I am tring to rid my repeater of a low
> signal squelch tail while using a PL board(TS-64 in decode only) and with
> the RTCM providing squelch, A kerchunk will get a long squelch tail ???...
> was not an issue with the URIx and DSP
> > have the squelch at 7 turns past minimum gating and still get a long
> crash ??
> >
> > Thank you all, in advance, for your time
> >
> >    Jim Frederick KF6QBW
> > 446.600-  100.0 PL Repeater
> >      AllStar Node # 28839
> >          Skype = jim41.2
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140128/d61634bf/attachment.html>