[App_rpt-users] Help getting started with RTCM and ACID

[Chris Bunting]

Thanks to Tim's help I am up and running! It was a conflict with my
password having the same name as the node.... whoops!
Thanks Tim :)
Thanks,
Chris Bunting
Lancaster Networks, LLC | Lancaster Towers, LLC
717-459-4321


On Thu, Jan 30, 2014 at 12:38 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
> You need to change the rxchannel in rpt.conf
>
> [28989]                                  ; Change this to your assigned node number
> rxchannel = Voter/28989                  ; Voter
>
> --
> Tim
> :wq
>
> On Jan 30, 2014, at 7:22 AM, Chris Bunting <chris at lancnet.com> wrote:
>
>> I have 2 RTCM boxes configured, and an ACID install. I figured out I
>> needed to create a voter.conf file, and it is as follows:
>>
>> [general]
>> port = 667
>> password = @@@@@@
>>
>> [28989]
>> NORTH = @@@@@,transmit
>> SOUTH = @@@@@,master,transmit
>>
>> (@ being my passwords)
>>
>>
>> Do I need to change anything in the rpt.conf file? I read something
>> about 1 line needing modified?
>>
>>
>> Also, I am on a LAN and the server has a static IP, can I simply enter
>> the IP in the FQDN field on the RTCM or must it be a FQDN that
>> resolves?
>>
>> I tried both, and Ithink I'm doing everything right, but I can't get
>> the darn box to connect to my server...
>>
>> After I get this connected it's time to break out the soldering iron
>> and hook this all up to my 2 repeaters for my simulcast project... fun
>> fun!
>>
>> Any hints/tips?
>>
>>
>> TIA
>>
>> Chris N3FYI
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>