[App_rpt-users] App_rpt-users Digest, Vol 65, Issue 8 Trouble Getting Registered

Fri Jul 4 11:59:59 UTC 2014

When you switch your node from DHCP to static IP, the name server in 
resolv.conf gets blown away. So the box doesn't get dns access.

So edit your /etc/resolv.conf file and put a name server of:

nameserver 8.8.8.8

Reboot, then you should be able to connect out and in.

By the way you may need to wait 10 -15 minutes before thew node is fully 
active. Once you node shows up in the Allstar active node list, it takes 
that long before most nodes find you IP address.

If you have dhcp set up this file automatically gets populated with a 
DNS that points to your IP provider or local router IP.

Jon VA3RQ

On 7/2/2014 12:34 PM, stephen liggett wrote:
> Trouble Getting Registered
>
> When I set up a static IP address, my asterisk does not register. When I am in DHCP, it does register, but I cannot receive calls. (I am able to call out to most other nodes).
>
> This is my [root at test network-scripts]# cat ifcfg-eth0
>
> DEVICE=eth0
> BOOTPROTO=none
> HWADDR=00:14:22:28:8c:90
> ONBOOT=yes
> DHCP_HOSTNAME=test
> TYPE=Ethernet
> IPADDR=192.168.1.30
> NETMASK=255.255.255.0
> GATEWAY=192.168.1.1
>
> Does anything look wrong with this?
>
> The port 4569 is forwarded on the ASIS router. IRLP works fine, BTW (whatever that means!). And I can shell in, ping sites, etc.
>
> Or, maybe something else is adrift. Any suggestions would be helpful.
>
> steve
> W3RX
>
>
>
> On Jul 2, 2014, at 10:43 AM, app_rpt-users-request at ohnosec.org wrote:
>
>> Send App_rpt-users mailing list submissions to
>> 	app_rpt-users at ohnosec.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> or, via email, send a message with subject or body 'help' to
>> 	app_rpt-users-request at ohnosec.org
>>
>> You can reach the person managing the list at
>> 	app_rpt-users-owner at ohnosec.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of App_rpt-users digest..."
>>
>>
>> Today's Topics:
>>
>>    1. Re: Error 1 (Skyler F)
>>    2. Re: Error 1 (Bob)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Wed, 2 Jul 2014 08:29:15 -0600
>> From: Skyler F <electricity440 at gmail.com>
>> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>> Subject: Re: [App_rpt-users] Error 1
>> Message-ID:
>> 	<CAJNyT09jXA+vY5o6OA6g=udZ6Rm5X_zZ=rDtRCZB2ryp5x-H8g at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I guess it didn't remember the stuff from yesterday, this is all it had
>> today
>>
>> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40764
>> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40930
>> [Jul  2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>>
>>
>>
>>
>>
>> On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm at gmail.com> wrote:
>>
>>> For sure Asterisk is not happy. A shot... sounds like the computer lost
>>> your URI/FOB USB address when it lost power. Need to reset using lsusb to
>>> identify address and reset devstr= parameters in the USB tune file. I?ve
>>> also had this problem when the network settings are not correct, but would
>>> bet on the devstr perameters.
>>>
>>>
>>>
>>> Bob
>>>
>>> kk6ecm
>>>
>>>
>>> ------------------------------
>>>
>>> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
>>> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Skyler F
>>> *Sent:* Tuesday, July 01, 2014 4:15 PM
>>> *To:* app_rpt-users at ohnosec.org
>>> *Subject:* [App_rpt-users] Error 1
>>>
>>>
>>>
>>> I know it is probably on the archive a lot of places, but I am
>>> experiencing Error 1 sometimes.
>>>
>>>
>>>
>>> It is sometimes right off the bat when I reboot the system, sometimes not.
>>> I had it before, and I decided to reinstall from scratch.
>>>
>>>
>>>
>>> Is there anything i can do about this? The only thing I could think that
>>> may have led to this is the power cord accidentally coming loose once when
>>> the computer was on.
>>>
>>>
>>>
>>>
>>>
>>> Asteriscks died with error code 1
>>>
>>>
>>>
>>> Automatically restarting
>>>
>>>
>>>
>>> Asteriscks died with error code 1
>>>
>>>
>>>
>>> Automatically restarting
>>>
>>>
>>>
>>> Asteriscks died with error code 1
>>>
>>>
>>>
>>> Automatically restarting
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ETC........................
>>>
>>>
>>>
>>>
>>>
>>> Thnks for any help.
>>>
>>>
>>>
>>> Skyler Fennell
>>>
>>> amsatnet.info
>>>
>>> KD?WHB
>>>
>>> electricity440 at gmail.com
>>>
>>
>>
>> -- 
>> Skyler Fennell
>> amsatnet.info
>> KD?WHB
>> electricity440 at gmail.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140702/b791241a/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Wed, 2 Jul 2014 07:47:50 -0700
>> From: "Bob" <kk6ecm at gmail.com>
>> To: "'Skyler F'" <electricity440 at gmail.com>,
>> 	<app_rpt-users at ohnosec.org>
>> Subject: Re: [App_rpt-users] Error 1
>> Message-ID: <6FCB595A0DF049479528011D151F6819 at ThePykesHP>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> I?ve had trouble with server2 for echolink. Recommend deleting and select
>> another from the list.
>>
>>
>>
>> Bob
>>
>> kk6ecm
>>
>>
>>
>>   _____
>>
>> From: app_rpt-users-bounces at ohnosec.org
>> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Skyler F
>> Sent: Wednesday, July 02, 2014 7:29 AM
>> To: app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Error 1
>>
>>
>>
>> I guess it didn't remember the stuff from yesterday, this is all it had
>> today
>>
>> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40764
>> [Jul  2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init  40930
>> [Jul  2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>> [Jul  2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect
>> to the Echolink server server2.echolink.org
>>
>>
>>
>>
>>
>>
>> On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm at gmail.com> wrote:
>>
>> For sure Asterisk is not happy. A shot... sounds like the computer lost your
>> URI/FOB USB address when it lost power. Need to reset using lsusb to
>> identify address and reset devstr= parameters in the USB tune file. I?ve
>> also had this problem when the network settings are not correct, but would
>> bet on the devstr perameters.
>>
>>
>>
>> Bob
>>
>> kk6ecm
>>
>>
>>
>>   _____
>>
>> From: app_rpt-users-bounces at ohnosec.org
>> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Skyler F
>> Sent: Tuesday, July 01, 2014 4:15 PM
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Error 1
>>
>>
>>
>> I know it is probably on the archive a lot of places, but I am experiencing
>> Error 1 sometimes.
>>
>>
>>
>> It is sometimes right off the bat when I reboot the system, sometimes not. I
>> had it before, and I decided to reinstall from scratch.
>>
>>
>>
>> Is there anything i can do about this? The only thing I could think that may
>> have led to this is the power cord accidentally coming loose once when the
>> computer was on.
>>
>>
>>
>>
>>
>> Asteriscks died with error code 1
>>
>>
>>
>> Automatically restarting
>>
>>
>>
>> Asteriscks died with error code 1
>>
>>
>>
>> Automatically restarting
>>
>>
>>
>>
>> Asteriscks died with error code 1
>>
>>
>>
>> Automatically restarting
>>
>>
>>
>>
>>
>>
>>
>>
>> ETC........................
>>
>>
>>
>>
>>
>> Thnks for any help.
>>
>>
>>
>> Skyler Fennell
>>
>> amsatnet.info
>>
>> KD?WHB
>>
>> electricity440 at gmail.com
>>
>>
>>
>>
>> -- 
>>
>> Skyler Fennell
>>
>> amsatnet.info
>>
>> KD?WHB
>>
>> electricity440 at gmail.com
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140702/55b8e3fd/attachment.html>
>>
>> ------------------------------
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>> End of App_rpt-users Digest, Vol 65, Issue 8
>> ********************************************
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>