[App_rpt-users] Transmitting Tone Sequences COP 48 No longer working

[Tim Sawyer]

Go to the Asterisk CLI by typing “asterisk -rvvv”. Then give your command and watch the CLI as you do.
 
On Jul 16, 2014, at 5:43 PM, W2YMM <w2ymm1 at gmail.com> wrote:

> I had this feature setup a few months ago and everything seemed to work ok.
> I tried it today and it is no longer working.
> Where can I investigate the error log files to see what may have happened ?
> 
> I use it to page a Motorola portable radio using Quick Call Paging.
> 887=cop,48,!2688.0/1000,!1130.5/3000  ; Send two tone paging sequence 
> 
> When I enter the code to transmit the signal, there is no tones produced.
> I have tried it with different radios as well as via the iaxRpt program.
> 
> Thanks for any help
> 
> Bob W2YMM
> 
> Robert Prybyzerski Jr
> W2YMM
> 631-960-1051
> http://www.w2ymm.com
> Allstar 28183,29973
> IRLP 4265
> Echolink 1224
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140716/10402bf8/attachment.html>