[App_rpt-users] Just a tiny problem to fix.

[Tim Sawyer]

Try putting the bindport=4568 statement above the bindaddr=0.0.0.0 line. If that doesn’t work try another port. We have found some ports just don’t work.

--
Tim
:wq

On Jun 13, 2014, at 4:31 AM, R.K. <vk3ant at optusnet.com.au> wrote:

>  
> Hello all.
>  
> I have 2 Nodes here an RTCM on node 28467 and a Beagle xM/LOX combo on node 29701
>  
> The RTCM works real well, no problems at all, but, the Beagle xM on the other hand has a one little issue I can’t seem to fix, can’t been seen in the database.
>  
> Reading the mail on this list the past few weeks and this same issue has already been raised, I see that I cannot have 2 different Nodes with the same port ( 4569 ) running on the same IP, they have to have unique port numbers.
>  
> To that end I have left the RTCM on port 4569 but I have moved the Beagle xM to port 4568.
>  
> Having done that to the Beagle xM I went in to the iax.conf and changed the bindport there, then I went in to allstarlink.org and changed the port number there too and submitted the changes. The Beagle xM now works fairly well, I can make outgoing calls AND it can receive incoming calls also but the Beagle xM ( node 29701 ) is not seen to everyone, no longer in the database.
>  
> The router I use here at home is a Netgear DGND3700 and it doesn’t seem to allow the Beagle to be registered in the database, but when I test the Beagle on another router I have, a TP link 3G the Beagle is seen by everyone and it looks like it is in the database.
>  
> I believe there are a few routers that do give a bit of trouble, and the Admins can do something to help get Nodes registered so I think I am in need of their help at this point, if no-one else has any other suggestions.
>  
> Thanks guys.
>  
> Ron.
> VK3ANT
> Melbourne.
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140613/4b89dcd3/attachment.html>