[App_rpt-users] QUESTION on making a receive only node

[George Csahanin]

Not just level but speaker audio (should) has filtered audio and PL won’t be there...speaker audio = bad audio.(Editorial comment: this is one way Echolink gets to sound Soooooooo bad)

George J Csahanin
W2DB
Cedar Park, TX
2360

From: Tim Sawyer 
Sent: Sunday, June 29, 2014 10:29 PM
To: Bradley Haney 
Cc: app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] QUESTION on making a receive only node

Nope, the USB dongle MIC input only needs a few hundred millivolts. Speaker is way more that that. What are you intending to sue for the receiver? Perhaps someone on this list will be familiar with your radio and can suggest a better place to get audio. 

--
Tim
:wq

On Jun 29, 2014, at 8:12 PM, Bradley Haney <hammin75 at gmail.com> wrote:


  Hello all we would like to  extend our repeater  receive area by putting in a receive site  but with a different PL tone .  we have an area that we lose HT coverage but  can hear it fine from the main tx of the repeater site. .  Could i just buy a USB FOB CM108  and not mod it  and just plug in the speaker from the radio into the Mic of the  dongle? 

  Thanks for your help

  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140629/1188b6f1/attachment.html>