[App_rpt-users] ACID install -- download site not working all week

[REDBUTTON_CTRL]

When you run the install acid cd and the script asks if you want a 
static or dynamic Ip choose dynamic. If you chooses static the namserver 
does not get set and the pc cannot find the site for downloads. If you 
choose dynamic (DHCP) then you should be able to download.

I always use dynamic Ip when doing new install from the Acid disc. After 
i have the default node built then i change it over manually to a static 
Ip and set the nameserver manually.

Just something to try.

Jon VA3RQ

On 3/2/2014 11:21 AM, mike at midnighteng.com wrote:
>
> Well,
> I knew that I would get a lot of replies for the simple stuff.
>
> Yes I did:
> Burn 6 different CD's using different make cd-r's
> re-download the iso on other system
> do a checksum on the iso
> Verify IP connection.
> Try the original disk from install last year.
> Try 2 other computers for install
>
> The system was a working system, All I did was swap the hard drive and 
> install again.
> only i mistakenly re-installed the original drive.
>
> Found a back-up drive and slip it in and updated the conf's and runs 
> like a charm but I still would like to make this work for myself and a 
> new server for new nodes.
>
> I'll probably clone the drive and change the vol label and work from that.
>
> I just wanted to verify  the download server was working before I copy 
> drive images to the folks I was helping.
>
> So if some of you say it's working, I'll take your word for it. I 
> tried to reach it manually without success.
>
> Thanks
>
> ...mike/kb8jnm
>
>
>     -------- Original Message --------
>     Subject: Re: [App_rpt-users] ACID install -- download site not working
>     all week
>     From: Doug Bade <kd8b at thebades.net <mailto:kd8b at thebades.net>>
>     Date: Sun, March 02, 2014 10:29 am
>     To: Angelo Glorioso <n5uxt at hotmail.com <mailto:n5uxt at hotmail.com>>
>     Cc:
>
>     I have found in many cases of script failure was due to Ethernet
>     hardware not recognized by the default initial install. I keep a
>     linksys usb300 around for installing and after all the CentOS
>     patching, the main nic is usually detected and I can remove the
>     USB nic.
>
>     /Sent from my Verizon Wireless 4G LTE DROID/
>
>
>     Angelo Glorioso <n5uxt at hotmail.com <mailto:n5uxt at hotmail.com>> wrote:
>
>     *Hi Mike,*
>     **
>     * I found that I needed to run a cd surface check each time to
>     verify the cd was good. You may have the same problem. Double
>     check the cd.  You may have to download and burn another one.*
>     **
>     *73 de Angelo*
>     **
>
>         ----- Original Message -----
>         *From:* Chris Andrist <mailto:chris at yeahmon.net>
>         *To:* app_rpt-users at ohnosec.org
>         <mailto:app_rpt-users at ohnosec.org>
>         *Sent:* Sunday, March 02, 2014 8:55 AM
>         *Subject:* Re: [App_rpt-users] ACID install -- download site
>         not working all week
>
>         The site seems to be working fine for me. You might try
>         downloading the ISO and burning it again.
>
>         --
>         Regards,
>
>         Chris Andrist, KC7WSU
>
>         On Mar 2, 2014, at 4:07 AM, "mike at midnighteng.com
>         <mailto:mike at midnighteng.com>" <mike at midnighteng.com
>         <mailto:mike at midnighteng.com>> wrote:
>
>>
>>         I was helping a few folks with their install and all of them
>>         got hung-up on the acid install when the script called for
>>         phase1 download.
>>
>>         I even changed my hard drive and tried it on my system...
>>         Problem being I did not change the hard drive (really
>>         reinstalled original drive) and wiped my install.
>>
>>         Can anyone verify what I'm seeing on three networks ?
>>         (download site broke)
>>
>>
>>         ...mike/kb8jnm
>>
>>
>>         _______________________________________________
>>         App_rpt-users mailing list
>>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>         To unsubscribe from this list please visit
>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>         scroll down to the bottom of the page. Enter your email
>>         address and press the "Unsubscribe or edit options button"
>>         You do not need a password to unsubscribe, you can do it via
>>         email confirmation. If you have trouble unsubscribing, please
>>         send a message to the list detailing the problem.
>         ------------------------------------------------------------------------
>         _______________________________________________
>         App_rpt-users mailing list
>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>         To unsubscribe from this list please visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>         scroll down to the bottom of the page. Enter your email
>         address and press the "Unsubscribe or edit options button"
>         You do not need a password to unsubscribe, you can do it via
>         email confirmation. If you have trouble unsubscribing, please
>         send a message to the list detailing the problem.
>
>     ------------------------------------------------------------------------
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140302/dd612c9f/attachment.html>