[App_rpt-users] Motorola GM1200

[Chris Andrist]

This should help. http://www.batlabs.com/gm900.html

In the CPS you will need to set one of the I/O pins to COR. I recommend pin 8.

--
Regards,

Chris Andrist, KC7WSU

On Mar 7, 2014, at 4:13 AM, "James Hill" <jrh at g0fhm.co.uk<mailto:jrh at g0fhm.co.uk>> wrote:

Hi Guys,

Is anybody using a Moto GM1200?

I've just bought one, with the intention of using it with simpleusb and parport PTT and COR.

Has anyone any information as to the pinouts? I've seen plenty of information regarding programming cables, but not much on hooking up to Echolink/Allstar.

Thanks,

James

29681

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140307/0dcca8e2/attachment.html>