[App_rpt-users] DMK URI GPIO temperature sensor

[Bryan D. Boyle]

i wouldn't use asterisk to do something like this;  this just smells more like an operating system application than something you'd try and shoehorn into a PBX.

--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



> On Mar 19, 2014, at 2:20, Bob Roszkowski <bob at w5evh.org> wrote:
> 
> Group,
> 
> Does anyone know if it is possible to measure sensors like temperature, battery voltage, and S readings remotely using the URIs GPIO pins?  My air conditioner in my cabinet at the repeater site decided to freeze up making it very hot in the cabinet.  Would like to be able to monitor it.
> 
> Another option is to plug something in to the USB port to monitor temperature and have the node able to notify if it falls outside the parameters set.  Has anyone done this?
> 
> thanks
> 
> boB - W5EVH
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.