[App_rpt-users] Finding older version of ACID

[Bob]

Can the DNS make it appear to not even find the connection, as though the
cable is not connected? The response I get (or lack of) looks like it would
if the cable were not connected. Looks like I have a bunch of things to try.


Thanks all,

Bob

kk6ecm

 

  _____  

From: Tim Sawyer [mailto:tim.sawyer at mac.com] 
Sent: Sunday, May 04, 2014 8:25 PM
To: Willem Schreuder
Cc: Bob; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Finding older version of ACID

 

I also use 'setup' to set a static IP address. But setup hammers
/etc/resolv.conf so I just go edit i.e. manually. Should look like so for
google dns, use others if you prefer:

 

nameserver 8.8.8.8

nameserver 8.8.4.4

--
Tim
:wq

 

On May 4, 2014, at 7:49 PM, Willem Schreuder <willem at prinmath.com> wrote:





On Sun, 4 May 2014, Bob wrote:




After the ACID load is complete, using a DHCP router, I run "setup" from the
command prompt, and configure it manually, IP, netmask, gateway, and DSN.
When I do this on a WinXp machine in the TC/IP window, connects directly to
the public (static) IP just fine. When I do it on the Linux box with ACID,
eth0 can't find the connection.


Bob, what you are doing seems correct.  I tend to manually edit files, but
there is nothing wrong doing it from 'setup'.  Bottom line, there is nothing
in ACID that prevents this from working.  I think you probably just have
some field wrong somewhere.

I would approach it bottom up - try pinging the from the AllStar computer to
the gateway using IP addresses, then using a symbolic name to test NDS, and
work your way up.  I bet you will find some subtle misconfiguraton somewhere
is causing the problem.

73 Willem

================================================================
Dr. Willem A. Schreuder,  President,  Principia Mathematica
Address:  445 Union Blvd, Suite 230,  Lakewood, CO  80228, USA
Tel: (303) 716-3573   Fax: (303) 716-3575
WWW: www.prinmath.com   Email: Willem.Schreuder at prinmath.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140504/e94d9385/attachment.html>