[App_rpt-users] Connect SIP Phone to allstarlink box

torben at klimt-online.com torben at klimt-online.com
Fri May 16 13:42:33 UTC 2014


hi all,
i know the post is a little bit older but the last days i had some time for testing and playing with my allstarnode.
@mike: tnx a lot for your instructions on the page http://themidnightengineer.com/category/ham-amateur-radio/app_rpt/config-set-up/

a call from SIP to repeater runs fine now but i have 2 questions

a, you write in your instruction "exten => 29283,n,Rpt,29283|P   ; make connection – the P is for phone control mode"
are there any other possibilitys for P ? is it possible to connect like the allstarlink telefon portal with VOX PTT ? instead of *99 and # ??

b, how can i call from the repeater to the SIP(i take the 6010 like you of course...)


tnx a lot and have a nice weekend

73.... tom dh6mbt


________________________________
Von: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] im Auftrag von mike at midnighteng.com [mike at midnighteng.com]
Gesendet: Freitag, 20. Dezember 2013 00:00
An: app_rpt-users at ohnosec.org
Betreff: Re: [App_rpt-users] Connect SIP Phone to allstarlink box

The answer to the one part is -Yes- you can connect to your sip/iax to app_rpt extension on the system.

Nothing extra is needed but the sip definition in the system and a compatible sip phone/software on your network.

Not to be taken the wrong way,

I would think many of us could help you through that but,
We have no way of knowing how much you know about the supporting structure, being asterisk pbx.

So I would say that you should look-up the support you need from asterisk online manuals on setting up a phone sip extension. Get the manual for asterisk at asterisk.org<http://asterisk.org/> and you might learn about the many capabilities of asterisk why you are at it.

When you have a particular problem doing that, ask that particular question. Many are glad to help.

Here is my sip extention for my ipad (with sip software)
--sip.conf

[6010]  ;iPad
deny=0.0.0.0/0.0.0.0
username=6010
secret=yoursecretpassword
dtmfmode=rfc2833
canreinvite=no
context=radio-control
host=dynamic
trustrpid=yes
sendrpid=no
type=friend
nat=no
port=5060
qualify=yes
qualifyfreq=60
transport=udp
encryption=no
callgroup=
pickupgroup=
dial=SIP/6010

That should get you started but get the asterisk manual. Many answers are in there.

...mike/kb8jnm


-------- Original Message --------
Subject: [App_rpt-users] Connect SIP Phone to allstarlink box
From: "torben at klimt-online.com<mailto:torben at klimt-online.com>" <torben at klimt-online.com<mailto:torben at klimt-online.com>>
Date: Thu, December 19, 2013 5:04 pm
To: "app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>>

Hi all,
I would like to connect 2-3 SIP Phones to the allstarlink box. Is it possible to call to each other AND to the repeater ?
Is there anyone you can help me doing that ? or are there some howto`s ?
I think I must write the “User/Clients/Phones” t0 the sip.conf and need some dialplans for calls from sip to sip and from sip to allstarlink-repeater
Tnx for the help
73…
Torben Klimt
Eicherstrasse 58
85123 Karlskron-Grillheim
Telefon: 08453-34 45 040
Fax: 08453 - 4085296
Mobil: 0151-178 74499
torben at klimt-online.com<https://exchange.df.eu/owa/redir.aspx?C=a04ffef3e8f44fe88175e5e5127907d7&URL=mailto%3atorben%40klimt-online.com>
________________________________
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140516/e83ab9af/attachment.html>


More information about the App_rpt-users mailing list