[App_rpt-users] Connect SIP Phone to allstarlink box

[Steve Wright]

You have quite a few options when connecting SIP phones or other toys to
the repeater network.  You might add SIP config to the repeater node, and
have SIP devices connect to it directly, or add another SIP server nearby
and trunk the two machines.

I looked at doing the same thing some ago, and I did manage to get SIP
devices connecting directly to the repeater node, but it was just an
experiment and was never put into service - but I could certainly dial in
and connect audio to the node.

I think if I was doing the job again, I would experiment with a separate
machine for the SIP phone server software - perhaps install one of the
commonly available Asterisk distributions for that task, and then peer that
machine with the repeater node.  This is added machinery, but I think it
will make both of the systems much easier to build and maintain.

Steve ZL1BHD
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140521/4ea6a5ae/attachment.html>