[App_rpt-users] next dumb question...re-compile asterisk in Limey

[Tim Sawyer]

Assuming you are following these instructions, that absolutely should compile on Limey. All the developer tools are normally there.

Limey runs in RAM. Maybe reboot and see if the compiler loads up correctly? 
--
Tim
:wq

On May 26, 2014, at 12:01 PM, George Csahanin <george at dyb.com> wrote:

> My memory is telling me that in a limey install it is possible to re-compile from the source. Just tried it and fails claiming cannot find g++
>  
>  
> Didn’t this used to work? Is something missing from busybox??
>  
> GeorgeC
> George J Csahanin
> W2DB
> Cedar Park, TX
> 512-401-2630 home
> 401-338-0568 cel
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140526/8e3bd29b/attachment.html>