From petem001 at hotmail.com  Sat Nov  1 00:40:55 2014
From: petem001 at hotmail.com (pete M)
Date: Fri, 31 Oct 2014 20:40:55 -0400
Subject: [App_rpt-users] connecting on private node number from an allstar
	node
Message-ID: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>

Ok I amsure it has been discussed before.. but google is not my friend tonight..
So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) 
the node number is 1100
I know I have to add this to the node stanza in rpt.conf
1100 = radio at ipadressofthenode:4570/1100,NONE
But do I have to add something else somewhere?
I was under the impression I had to add something in extension.conf? 
Thanks for the help
ve2pf

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141031/19d97dbb/attachment.html>

From tim.sawyer at mac.com  Sat Nov  1 01:26:03 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Fri, 31 Oct 2014 18:26:03 -0700
Subject: [App_rpt-users] connecting on private node number from an
 allstar node
In-Reply-To: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>
References: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>
Message-ID: <2C4A071A-554F-42F2-BA7C-C69EF05AA846@mac.com>

Yes, you have to do two steps.

1) On the web site ( the AllStar portal), go into your server network configuration and change the port to 4570
2) On your node edit /etc/asterisk/iax.config to add a line bindport=4570 above the bindaddr=0.0.0.0 line. 

restart you node.
--
Tim WD6AWP

> On Oct 31, 2014, at 5:40 PM, pete M <petem001 at hotmail.com> wrote:
> 
> Ok I amsure it has been discussed before.. but google is not my friend tonight..
> 
> So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) 
> 
> the node number is 1100
> 
> I know I have to add this to the node stanza in rpt.conf
> 
> 1100 = radio at ipadressofthenode:4570/1100,NONE
> 
> But do I have to add something else somewhere?
> 
> I was under the impression I had to add something in extension.conf? 
> 
> Thanks for the help
> 
> ve2pf
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141031/6d999135/attachment.html>

From doug at crompton.com  Sat Nov  1 01:32:17 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 31 Oct 2014 21:32:17 -0400
Subject: [App_rpt-users] connecting on private node number from an
 allstar node
In-Reply-To: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>
References: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>
Message-ID: <BLU172-W1643CC01A35532911D930BBA9B0@phx.gbl>

In extensions.conf -

[radio-secure]
exten => 1100,1,rpt,1100

The entry in rpt.conf would be -

[nodes]
1100 = radio at 127.0.0.1/1100,NONE

and in iax.conf -

[general]
bindport=4570

The OTHER end of the connection would need an rpt.conf entry like -

[nodes]
1100 = radio at ip_address_of_1100:4570/1100,NONE

Note that the IP address above is the local IP address if on the same network or the public IP address if remote. In that case it would also have to be port forwarded in your router. If the node 1100 was connecting to was also private it would need to have an entry in it's nodes stanza of rpt.conf with the address and port information of the remote node.  

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: petem001 at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Fri, 31 Oct 2014 20:40:55 -0400
Subject: [App_rpt-users] connecting on private node number from an allstar	node




Ok I amsure it has been discussed before.. but google is not my friend tonight..
So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) 
the node number is 1100
I know I have to add this to the node stanza in rpt.conf
1100 = radio at ipadressofthenode:4570/1100,NONE
But do I have to add something else somewhere?
I was under the impression I had to add something in extension.conf? 
Thanks for the help
ve2pf

 		 	   		  

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141031/aa4d590d/attachment.html>

From tim.sawyer at mac.com  Sat Nov  1 04:18:53 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Fri, 31 Oct 2014 21:18:53 -0700
Subject: [App_rpt-users] connecting on private node number from an
 allstar node
In-Reply-To: <BLU172-W1643CC01A35532911D930BBA9B0@phx.gbl>
References: <BAY176-W84421E051BF6745173E1D979B0@phx.gbl>
	<BLU172-W1643CC01A35532911D930BBA9B0@phx.gbl>
Message-ID: <233E1B57-666F-4EB7-BD18-B85CD4CBDEAF@mac.com>

I missed that fact that it?s a private node. It that case you do not need, in fact can?t, modify the server entry on the portal.

In addition to Doug?s example below there are a couple of things to add. In the local [nodes] stanza in rpt.conf the loopback needs the port. And it needs a list of all the other private nodes you want to connect. If the other end was node 1000 then the local [nodes] stanza would look like this:

[nodes]
1100 = radio at 127.0.0.1 <mailto:radio at 127.0.0.1>:4570/1100,NONE
1000 = radio at IP_address_of_1000:port_if_not_4569/1000,NONE
 
Also, if you don?t have a registered public node you will not be able to connect to other public nodes.

--
Tim
:wq

> On Oct 31, 2014, at 6:32 PM, Doug Crompton <doug at crompton.com> wrote:
> 
> In extensions.conf -
> 
> [radio-secure]
> exten => 1100,1,rpt,1100
> 
> The entry in rpt.conf would be -
> 
> [nodes]
> 1100 = radio at 127.0.0.1 <mailto:radio at 127.0.0.1>/1100,NONE
> 
> and in iax.conf -
> 
> [general]
> bindport=4570
> 
> The OTHER end of the connection would need an rpt.conf entry like -
> 
> [nodes]
> 1100 = radio at ip_address_of_1100:4570/1100,NONE
> 
> Note that the IP address above is the local IP address if on the same network or the public IP address if remote. In that case it would also have to be port forwarded in your router. If the node 1100 was connecting to was also private it would need to have an entry in it's nodes stanza of rpt.conf with the address and port information of the remote node.  
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>
> 
> 
> From: petem001 at hotmail.com
> To: app_rpt-users at ohnosec.org
> Date: Fri, 31 Oct 2014 20:40:55 -0400
> Subject: [App_rpt-users] connecting on private node number from an allstar	node
> 
> Ok I amsure it has been discussed before.. but google is not my friend tonight..
> 
> So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) 
> 
> the node number is 1100
> 
> I know I have to add this to the node stanza in rpt.conf
> 
> 1100 = radio at ipadressofthenode:4570/1100,NONE
> 
> But do I have to add something else somewhere?
> 
> I was under the impression I had to add something in extension.conf? 
> 
> Thanks for the help
> 
> ve2pf
> 
> 
> 
> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141031/58c9d9db/attachment.html>

From kc7mrq at bresnan.net  Sat Nov  1 13:48:47 2014
From: kc7mrq at bresnan.net (COREY  BADGLEY)
Date: Sat, 01 Nov 2014 07:48:47 -0600
Subject: [App_rpt-users] Gps18 lvc
Message-ID: <web-7570179@be-5.cluster1.bresnan.net>


I purchased two garmin 18 lvc to hook to a rtcm. No data output on rxd or pps 
when I apply 5v. Is there a step I a step I am missing when hooking them up?


Best regards,

Corey Badgley


From mike at midnighteng.com  Sat Nov  1 15:14:34 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Sat, 01 Nov 2014 08:14:34 -0700
Subject: [App_rpt-users] =?utf-8?q?Gps18_lvc?=
Message-ID: <20141101081434.71befee5dbd13c5325dd1a521b4e73ee.fe8b43b00a.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141101/0e0cec8a/attachment.html>

From electricity440 at gmail.com  Sat Nov  1 22:33:09 2014
From: electricity440 at gmail.com (Skyler Fennell)
Date: Sat, 1 Nov 2014 16:33:09 -0600
Subject: [App_rpt-users] Serial communication
Message-ID: <BB681C5C-02FE-4F2B-942E-BDC040609BF5@gmail.com>

I have a pk232 packet TNC and a computer with a serial port. I would like to be able to control the pk232 from my computer used for Allstar via a terminal for serial communication, and eventually might want to integrate the packet stuff with Allstar. Is there a simple centOS program to communicate with serial ( 1200 or 9600 baud, standard protocol etc.)?

And yes, my computer has a serial port, not usb to serial.

Thanks
Skyler KD?WHB

From n3fe at repeater.net  Sat Nov  1 23:02:25 2014
From: n3fe at repeater.net (Corey Dean)
Date: Sat, 1 Nov 2014 19:02:25 -0400
Subject: [App_rpt-users] Serial communication
In-Reply-To: <BB681C5C-02FE-4F2B-942E-BDC040609BF5@gmail.com>
References: <BB681C5C-02FE-4F2B-942E-BDC040609BF5@gmail.com>
Message-ID: <67DF8C93-E8F0-468D-BB5B-FA634B726637@repeater.net>

Look at minicom

Corey N3FE

> On Nov 1, 2014, at 6:33 PM, Skyler Fennell <electricity440 at gmail.com> wrote:
> 
> I have a pk232 packet TNC and a computer with a serial port. I would like to be able to control the pk232 from my computer used for Allstar via a terminal for serial communication, and eventually might want to integrate the packet stuff with Allstar. Is there a simple centOS program to communicate with serial ( 1200 or 9600 baud, standard protocol etc.)?
> 
> And yes, my computer has a serial port, not usb to serial.
> 
> Thanks
> Skyler KD?WHB
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From kuggie at kuggie.com  Tue Nov  4 04:54:50 2014
From: kuggie at kuggie.com (Kevin Custer)
Date: Mon, 03 Nov 2014 23:54:50 -0500
Subject: [App_rpt-users] SYBA USB sound adapter modification.
In-Reply-To: <54585BC9.4070305@kuggie.com>
References: <5457D707.8080804@kuggie.com> <54585BC9.4070305@kuggie.com>
Message-ID: <54585C1A.2000105@kuggie.com>

Here is another article that details the construction of a USB radio 
interface from a SYBA UAUD71 USB sound adapter.  This one makes use of 
Chuck Kelsey's circuit board and an inexpensive plastic case.

http://www.repeater-builder.com/voip/voip-index.html

Scroll down to the bottom of the page and click the SYBA UAUD71 link.
(other articles for other devices are also listed)

Comments, questions, and constructive criticisms welcomed in private email.

Thanks,
Kevin Custer - W3KKC


From petem001 at hotmail.com  Wed Nov  5 14:48:10 2014
From: petem001 at hotmail.com (pete M)
Date: Wed, 5 Nov 2014 09:48:10 -0500
Subject: [App_rpt-users] mooving a tkr 750 frequency
Message-ID: <BAY176-DS86E4287C6DDA45A5A027F97870@phx.gbl>

Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him.. 
So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750?

it is a large difference switching from  RX 147.720 to 146.190 (1.530 mhz)  but is it that much too large?

Thaks for your feedback..

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/56f7af89/attachment.html>

From jrorke at cogeco.ca  Wed Nov  5 16:14:26 2014
From: jrorke at cogeco.ca (Jon Rorke)
Date: Wed, 05 Nov 2014 11:14:26 -0500
Subject: [App_rpt-users] mooving a tkr 750 frequency
In-Reply-To: <BAY176-DS86E4287C6DDA45A5A027F97870@phx.gbl>
References: <BAY176-DS86E4287C6DDA45A5A027F97870@phx.gbl>
Message-ID: <545A4CE2.4020304@cogeco.ca>

The TKR 750 should go ok with out any retuning.

If its properly tuned for the center ham band (both VCO and Front end) 
then it should go the whole band without retuning. I think its good for 
10 to 15 meg tuning range with little or no degredation.
YMMV.

Jon VA3RQ

On 11/5/2014 9:48 AM, pete M wrote:
> Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + 
> And my friend MSR2000 is failling on him..
> So I was wondering if he could use my tkr-750 for his frequency 
> 146.790 - with out having to retune the repeater cause it is temporary 
> but still have fair/good performance out of the tkr750?
> it is a large difference switching from  RX 147.720 to 146.190 (1.530 
> mhz)  but is it that much too large?
> Thaks for your feedback..
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/3c1619d0/attachment.html>

From ars.w5omr at gmail.com  Wed Nov  5 16:28:49 2014
From: ars.w5omr at gmail.com (Geoff)
Date: Wed, 05 Nov 2014 10:28:49 -0600
Subject: [App_rpt-users] mooving a tkr 750 frequency
Message-ID: <kxvwb3ihs3hwe4jt5g1suh3n.1415204929094@email.android.com>

I'd retune the repeater. ?At least the reciever . That's the easiest. ?His cans are already tuned.

<div>-------- Original message --------</div><div>From: pete M <petem001 at hotmail.com> </div><div>Date:11/05/2014  08:48  (GMT-06:00) </div><div>To: APP RPT <app_rpt-users at ohnosec.org> </div><div>Subject: [App_rpt-users] mooving a tkr 750 frequency </div><div>
</div>Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him..
So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750?
 
it is a large difference switching from  RX 147.720 to 146.190 (1.530 mhz)  but is it that much too large?
 
Thaks for your feedback..
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/fd85e371/attachment.html>

From alberto_e_puig at hotmail.com  Wed Nov  5 19:12:34 2014
From: alberto_e_puig at hotmail.com (alberto e. puig)
Date: Wed, 5 Nov 2014 14:12:34 -0500
Subject: [App_rpt-users] Recomendeded commands for ajusting the time in my
	node.
In-Reply-To: <mailman.1.1415206801.18131.app_rpt-users@ohnosec.org>
References: <mailman.1.1415206801.18131.app_rpt-users@ohnosec.org>
Message-ID: <BLU170-W41DB58E470CAE4E463D289C2870@phx.gbl>

Hi everyone,
Newbie on allstar,no linux expert.Trying to follow these recommended commands for adjusting the time in my node.

          Adjusting the Time Zone        
                          
                  
                          
    

    
  
    

      
  
  
    By
 default ACID is configured for the US Pacific time zone. The file 
/etc/localtime controls which time zone the system thinks it is in. All 
of the time zone files the rest of the world are located in 
/usr/share/zoneinfo. To change the time zone, find the time zone file 
you want to use, and make a soft link to it like this:

cd /etc
cp localtime localtime.orig
ln -sf /usr/share/zoneinfo/Australia/Victoria localtime

You can check to see that the time zone is now correct by using the date command from the shell.

Can someone give me a hint on how to do this? All help will be appreciated.Thanks

Alberto, node 41355 73s

KP4AP

> From: app_rpt-users-request at ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 5
> To: app_rpt-users at ohnosec.org
> Date: Wed, 5 Nov 2014 12:00:01 -0500
> 
> Send App_rpt-users mailing list submissions to
> 	app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> 	app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
> 	app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. mooving a tkr 750 frequency (pete M)
>    2. Re: mooving a tkr 750 frequency (Jon Rorke)
>    3. Re: mooving a tkr 750 frequency (Geoff)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Wed, 5 Nov 2014 09:48:10 -0500
> From: pete M <petem001 at hotmail.com>
> To: "APP RPT" <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] mooving a tkr 750 frequency
> Message-ID: <BAY176-DS86E4287C6DDA45A5A027F97870 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him.. 
> So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750?
> 
> it is a large difference switching from  RX 147.720 to 146.190 (1.530 mhz)  but is it that much too large?
> 
> Thaks for your feedback..
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141105/56f7af89/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Wed, 05 Nov 2014 11:14:26 -0500
> From: Jon Rorke <jrorke at cogeco.ca>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] mooving a tkr 750 frequency
> Message-ID: <545A4CE2.4020304 at cogeco.ca>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
> 
> The TKR 750 should go ok with out any retuning.
> 
> If its properly tuned for the center ham band (both VCO and Front end) 
> then it should go the whole band without retuning. I think its good for 
> 10 to 15 meg tuning range with little or no degredation.
> YMMV.
> 
> Jon VA3RQ
> 
> On 11/5/2014 9:48 AM, pete M wrote:
> > Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + 
> > And my friend MSR2000 is failling on him..
> > So I was wondering if he could use my tkr-750 for his frequency 
> > 146.790 - with out having to retune the repeater cause it is temporary 
> > but still have fair/good performance out of the tkr750?
> > it is a large difference switching from  RX 147.720 to 146.190 (1.530 
> > mhz)  but is it that much too large?
> > Thaks for your feedback..
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141105/3c1619d0/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Wed, 05 Nov 2014 10:28:49 -0600
> From: Geoff <ars.w5omr at gmail.com>
> To: pete M <petem001 at hotmail.com>, APP RPT <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] mooving a tkr 750 frequency
> Message-ID: <kxvwb3ihs3hwe4jt5g1suh3n.1415204929094 at email.android.com>
> Content-Type: text/plain; charset="utf-8"
> 
> I'd retune the repeater. ?At least the reciever . That's the easiest. ?His cans are already tuned.
> 
> <div>-------- Original message --------</div><div>From: pete M <petem001 at hotmail.com> </div><div>Date:11/05/2014  08:48  (GMT-06:00) </div><div>To: APP RPT <app_rpt-users at ohnosec.org> </div><div>Subject: [App_rpt-users] mooving a tkr 750 frequency </div><div>
> </div>Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him..
> So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750?
>  
> it is a large difference switching from  RX 147.720 to 146.190 (1.530 mhz)  but is it that much too large?
>  
> Thaks for your feedback..
>  
>  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141105/fd85e371/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 5
> ********************************************
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/5e745fc9/attachment.html>

From doug at crompton.com  Wed Nov  5 19:52:53 2014
From: doug at crompton.com (Doug Crompton)
Date: Wed, 5 Nov 2014 14:52:53 -0500
Subject: [App_rpt-users] Recomendeded commands for ajusting the time in
 my node.
In-Reply-To: <BLU170-W41DB58E470CAE4E463D289C2870@phx.gbl>
References: <mailman.1.1415206801.18131.app_rpt-users@ohnosec.org>,
	<BLU170-W41DB58E470CAE4E463D289C2870@phx.gbl>
Message-ID: <BLU172-W48C848732E785651ACAFE5BA870@phx.gbl>

Alberto,

   You do exactly the commands you gave - here is some more detail...

At the linux prompt typecd /etc
cp localtime localtime.orig

This copies the existing localtime file to localtime.orig   
This is not really necessary but should you ever want to return it to original it is there.
Then look at the directory where the time zone files are stored.

ls /usr/share/zoneinfo/

You should see something like this -

Africa      Chile    GB         Indian       Mideast   posixrules  US
America     CST6CDT  GB-Eire    Iran         MST       PRC         UTC
Antarctica  Cuba     GMT        iso3166.tab  MST7MDT   PST8PDT     WET
Arctic      EET      GMT0       Israel       Navajo    right       W-SU
Asia        Egypt    GMT-0      Jamaica      NZ        ROC         zone.tab
Atlantic    Eire     GMT+0      Japan        NZ-CHAT   ROK         Zulu
Australia   EST      Greenwich  Kwajalein    Pacific   Singapore
Brazil      EST5EDT  Hongkong   Libya        Poland    Turkey
Canada      Etc      HST        MET          Portugal  UCT
CET         Europe   Iceland    Mexico       posix     Universal

Choose the one that applies to your zone - I think you are Puerto Rico so you would then look at the America directory and listed there is Puerto_Rico

So the entire path would be -

/usr/share/zoneinfo/America/Puerto_Rico

Now make sure you are in the /etc directory -

cd /etc

Then create a link of that file to localtime -

ln -sf /usr/share/zoneinfo/America/Puerto_Rico localtime

Remember case is important!

Then do a date command and hopefully see you r local time -

date

Wed Nov  5 14:51:06 EST 2014

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: alberto_e_puig at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Wed, 5 Nov 2014 14:12:34 -0500
Subject: [App_rpt-users] Recomendeded commands for ajusting the time in my	node.




Hi everyone,
Newbie on allstar,no linux expert.Trying to follow these recommended commands for adjusting the time in my node.

          Adjusting the Time Zone        
                          
                  
                          
    

    
  
    

      
  
  
    By
 default ACID is configured for the US Pacific time zone. The file 
/etc/localtime controls which time zone the system thinks it is in. All 
of the time zone files the rest of the world are located in 
/usr/share/zoneinfo. To change the time zone, find the time zone file 
you want to use, and make a soft link to it like this:

cd /etc
cp localtime localtime.orig
ln -sf /usr/share/zoneinfo/Australia/Victoria localtime

You can check to see that the time zone is now correct by using the date command from the shell.

Can someone give me a hint on how to do this? All help will be appreciated.Thanks

Alberto, node 41355 73s

KP4AP

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/7ca06403/attachment.html>

From N1XBM at amsat.org  Thu Nov  6 03:05:29 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Wed, 5 Nov 2014 22:05:29 -0500
Subject: [App_rpt-users] Portanode
Message-ID: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>

I've had this vision of making a portable simplex node that I could take
anywhere and use my wifi broadcast feature on my Android phone. I figured a
BBB would fit the bill.

I'm not totally up in everything available networking wise. Would it make
more sense to use something that plugs into the ethernet port of the BBB
that would pick up the wifi? Does such a device exist?

Or just plug some sort of wifi device into the USB of of the BBB.

Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/616e1d18/attachment.html>

From doug at crompton.com  Thu Nov  6 03:51:26 2014
From: doug at crompton.com (Doug Crompton)
Date: Wed, 5 Nov 2014 22:51:26 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
Message-ID: <BLU172-W460C04F8CB2453A657B9E3BA840@phx.gbl>

You should probably ask that question over on the arm-allstar list but the short answer is we don't have a lot of data on it. The USB wifi on the BBB works fine if you follow the directions and use the prescribed hardware. There are Ethernet wifi adapters but they are more expensive. The BBB would see that as just another Ethernet connection and I am sure work fine. The problem is the connection to the Internet, whether it is a USB adapter or some other means, often does not work well in a mobile environment. Some questions would be, how good is the connection? Does the IP address change when moving between cells or when moving over greater distances. You could possibly use a VPN to eliminate that problem.

I suppose you could test the circuit by using your smart phone to connect to your node using iaxrpt or even echolink while you are traveling around and see how well it works. My guess is that since we are use to good connections and not very tolerant of anything less the breakups and disconnections you would encounter would probably be more aggravation than its worth.   
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 5 Nov 2014 22:05:29 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Portanode

I've had this vision of making a portable simplex node that I could take anywhere and use my wifi broadcast feature on my Android phone. I figured a BBB would fit the bill. 
I'm not totally up in everything available networking wise. Would it make more sense to use something that plugs into the ethernet port of the BBB that would pick up the wifi? Does such a device exist? 
Or just plug some sort of wifi device into the USB of of the BBB.
Thank you

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/cc550a31/attachment.html>

From dl1flo at u01.de  Thu Nov  6 05:33:14 2014
From: dl1flo at u01.de (Florian Schmid)
Date: Thu, 6 Nov 2014 06:33:14 +0100
Subject: [App_rpt-users] Portanode
In-Reply-To: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
Message-ID: <57A8C83F-8676-4834-ABF8-113EB07A68CC@u01.de>

Hi,

I use the thing what you need. Not for a repeater, bunt it works in Raspberry.

http://www.amazon.de/dp/B005HMQQ72/ref=asc_df_B005HMQQ7222122004?smid=A1LQYFDLCMS5W8&tag=geizhals10-21&linkCode=df0&creative=22514&creativeASIN=B005HMQQ72&childASIN=B005HMQQ72

It is in German, sorry.

It called: 
Hama 53122 Or Hama N150

You can connect the device with wlan and with cable than a Computer,Raspberry...
You can go in with lan cable to and make a WLAN Access Point. Both ways are possible.

You Need only one USB Port for Voltage and current to tun the device. 

73 Florian




> Am 06.11.2014 um 04:05 schrieb Robert Newberry <N1XBM at amsat.org>:
> 
> I've had this vision of making a portable simplex node that I could take anywhere and use my wifi broadcast feature on my Android phone. I figured a BBB would fit the bill.
> 
> I'm not totally up in everything available networking wise. Would it make more sense to use something that plugs into the ethernet port of the BBB that would pick up the wifi? Does such a device exist?
> 
> Or just plug some sort of wifi device into the USB of of the BBB.
> 
> Thank you
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/dedfc320/attachment.html>

From doug at crompton.com  Thu Nov  6 06:04:55 2014
From: doug at crompton.com (Doug Crompton)
Date: Thu, 6 Nov 2014 01:04:55 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
Message-ID: <BLU172-W48A831404858F29C014CE1BA840@phx.gbl>

On a side note to this I see Forf is offering wifi in some of their models this year. I suspect others will follow. It will be interesting to see how well that works out. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Wed, 5 Nov 2014 22:05:29 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Portanode

I've had this vision of making a portable simplex node that I could take anywhere and use my wifi broadcast feature on my Android phone. I figured a BBB would fit the bill. 
I'm not totally up in everything available networking wise. Would it make more sense to use something that plugs into the ethernet port of the BBB that would pick up the wifi? Does such a device exist? 
Or just plug some sort of wifi device into the USB of of the BBB.
Thank you

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/a4168c5c/attachment.html>

From mark at micro-node.com  Thu Nov  6 06:23:36 2014
From: mark at micro-node.com (Mark Guibord)
Date: Wed, 5 Nov 2014 22:23:36 -0800
Subject: [App_rpt-users] Portanode
In-Reply-To: <C64z1p00D0UUS9J01651cA>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
	<C64z1p00D0UUS9J01651cA>
Message-ID: <00ab01cff98a$334c5f80$99e51e80$@com>

This device works very well and is relatively inexpensive at $17.

 

http://www.amazon.com/Vonets-Wireless-Dreambox-Network-Printer/dp/B00H4WMZ1O
/ref=sr_1_2?ie=UTF8&qid=1415254814&sr=8-2&keywords=vonets

 

Mark 

K7IZA

http://Micro-node.com

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Wednesday, November 05, 2014 10:05 PM
To: Robert Newberry
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

 

On a side note to this I see Forf is offering wifi in some of their models
this year. I suspect others will follow. It will be interesting to see how
well that works out. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio



  _____  

Date: Wed, 5 Nov 2014 22:05:29 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Portanode

I've had this vision of making a portable simplex node that I could take
anywhere and use my wifi broadcast feature on my Android phone. I figured a
BBB would fit the bill. 

I'm not totally up in everything available networking wise. Would it make
more sense to use something that plugs into the ethernet port of the BBB
that would pick up the wifi? Does such a device exist? 

Or just plug some sort of wifi device into the USB of of the BBB.

Thank you


_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button" You do not need a password to unsubscribe, you can
do it via email confirmation. If you have trouble unsubscribing, please send
a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141105/ed22edd1/attachment.html>

From alberto_e_puig at hotmail.com  Thu Nov  6 14:47:22 2014
From: alberto_e_puig at hotmail.com (alberto e. puig)
Date: Thu, 6 Nov 2014 09:47:22 -0500
Subject: [App_rpt-users] Recomendeded commands for ajusting the time in
 my node.
In-Reply-To: <BLU172-W48C848732E785651ACAFE5BA870@phx.gbl>
References: <mailman.1.1415206801.18131.app_rpt-users@ohnosec.org>,
	<BLU170-W41DB58E470CAE4E463D289C2870@phx.gbl>,
	<BLU172-W48C848732E785651ACAFE5BA870@phx.gbl>
Message-ID: <BLU170-W119E9B204101B13451827FAC2840@phx.gbl>

Doug, Ian; 
Thanks very much for your advice.Run those time zone commands and after running the date command, now I have the node showing "Nov 6 08:50:17 UTC 2014" One hour earlier than my local time (showing actual US eastern time). Have I overlook something?

Thanks, 

 KP4AP Alberto

From: doug at crompton.com
To: alberto_e_puig at hotmail.com
CC: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Recomendeded commands for ajusting the time in my node.
Date: Wed, 5 Nov 2014 14:52:53 -0500




Alberto,

   You do exactly the commands you gave - here is some more detail...

At the linux prompt typecd /etc
cp localtime localtime.orig

This copies the existing localtime file to localtime.orig   
This is not really necessary but should you ever want to return it to original it is there.
Then look at the directory where the time zone files are stored.

ls /usr/share/zoneinfo/

You should see something like this -

Africa      Chile    GB         Indian       Mideast   posixrules  US
America     CST6CDT  GB-Eire    Iran         MST       PRC         UTC
Antarctica  Cuba     GMT        iso3166.tab  MST7MDT   PST8PDT     WET
Arctic      EET      GMT0       Israel       Navajo    right       W-SU
Asia        Egypt    GMT-0      Jamaica      NZ        ROC         zone.tab
Atlantic    Eire     GMT+0      Japan        NZ-CHAT   ROK         Zulu
Australia   EST      Greenwich  Kwajalein    Pacific   Singapore
Brazil      EST5EDT  Hongkong   Libya        Poland    Turkey
Canada      Etc      HST        MET          Portugal  UCT
CET         Europe   Iceland    Mexico       posix     Universal

Choose the one that applies to your zone - I think you are Puerto Rico so you would then look at the America directory and listed there is Puerto_Rico

So the entire path would be -

/usr/share/zoneinfo/America/Puerto_Rico

Now make sure you are in the /etc directory -

cd /etc

Then create a link of that file to localtime -

ln -sf /usr/share/zoneinfo/America/Puerto_Rico localtime

Remember case is important!

Then do a date command and hopefully see you r local time -

date

Wed Nov  5 14:51:06 EST 2014

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: alberto_e_puig at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Wed, 5 Nov 2014 14:12:34 -0500
Subject: [App_rpt-users] Recomendeded commands for ajusting the time in my	node.




Hi everyone,
Newbie on allstar,no linux expert.Trying to follow these recommended commands for adjusting the time in my node.

          Adjusting the Time Zone        
                          
                  
                          
    

    
  
    

      
  
  
    By
 default ACID is configured for the US Pacific time zone. The file 
/etc/localtime controls which time zone the system thinks it is in. All 
of the time zone files the rest of the world are located in 
/usr/share/zoneinfo. To change the time zone, find the time zone file 
you want to use, and make a soft link to it like this:

cd /etc
cp localtime localtime.orig
ln -sf /usr/share/zoneinfo/Australia/Victoria localtime

You can check to see that the time zone is now correct by using the date command from the shell.

Can someone give me a hint on how to do this? All help will be appreciated.Thanks

Alberto, node 41355 73s

KP4AP

 		 	   		   		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/8fa41433/attachment.html>

From vacuumtubesforever at gmail.com  Thu Nov  6 14:53:31 2014
From: vacuumtubesforever at gmail.com (Ed Wilhelm)
Date: Thu, 06 Nov 2014 09:53:31 -0500
Subject: [App_rpt-users] URI GPIO
Message-ID: <545B8B6B.10701@gmail.com>

Trying to use URI GPIO for the first time and having issues.

I am using simpleusb and in the config file have them defined like this:

GPIO4=out1

GPIO5=out1

I can only manipulate GPIO4. Have tried all of them and can only access 
GPIO4. Thought may be my URI had issues, so tried a different one. Same 
results.

Tried using the parallel port and that works just fine. Can use that if 
I have to, but would really like to find out what the deal is with URI 
GPIO.

Doing something stupid somewhere but can't find it.

Suggestions?

W8VT
Nodes 27849 29496
Beckley WV

---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com



From N1XBM at amsat.org  Thu Nov  6 15:40:09 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Thu, 6 Nov 2014 10:40:09 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <00ab01cff98a$334c5f80$99e51e80$@com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
	<00ab01cff98a$334c5f80$99e51e80$@com>
Message-ID: <CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>

>From googling and the replies here. It looks like a wifi bridge would
receive the wifi and allow me to plug in and ethernet cable from the bridge
to the BBB. This would be something I would haul to camp and setup as a
temporary location or take to a ham fest.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/da0ccfc2/attachment.html>

From doug at crompton.com  Thu Nov  6 17:35:55 2014
From: doug at crompton.com (Doug Crompton)
Date: Thu, 6 Nov 2014 12:35:55 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>
Message-ID: <BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>

Robert,

  In a fixed location this might work quite well. The problem is moving, poor signal quality and IP address changes could be an issue. But keep in mind that even if you establish a stable wifi connection at a fixed location you still have to be able to connect to it. You need to know the ssid and you would have to setup a profile in the BBB to tell it to connect to that ssid. In addition many "free" sites require you to go in on a web page and agree to terms of service. If this were the case you would need to have a way to console control the BBB to accomplish that.

If you had control over the wifi such as a hotspot created by a phone or other device then the BBB would connect either to your known wifi or an ethernet connection created by an external device and it would eliminate those problems. You would know the ssid and you could setup a profile ahead of time. All this is ripe for experimentation and it will be interesting to hear about the results people have with it.

I still think this discussion especially if it applies to the BBB wifi should be over on the arm-allstar list.    
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 6 Nov 2014 10:40:09 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

>From googling and the replies here. It looks like a wifi bridge would receive the wifi and allow me to plug in and ethernet cable from the bridge to the BBB. This would be something I would haul to camp and setup as a temporary location or take to a ham fest. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/72c23e09/attachment.html>

From N1XBM at amsat.org  Thu Nov  6 19:26:20 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Thu, 6 Nov 2014 14:26:20 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>
	<00ab01cff98a$334c5f80$99e51e80$@com>
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>
Message-ID: <CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>

Maybe my terminology is off or I didn't communicate that I'd be using my
android phone to broadcast wifi in a fixed locations that are known to have
stable/reliable signal.  I was planning to use some sort of wifi bridge and
then plug the BBB into the bridge.  Please don't assume my reply has a rude
tone. Maybe you did understand me and I'm just missing the big picture.
I'll take your advice into consideration when I try to test this.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/4b45831f/attachment.html>

From doug at crompton.com  Thu Nov  6 22:42:11 2014
From: doug at crompton.com (Doug Crompton)
Date: Thu, 6 Nov 2014 17:42:11 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>,
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>,
	<CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
Message-ID: <BLU172-W1785CA62C8BC5B7AF3278BBA840@phx.gbl>




Robert,

No not at all as far as tone. It is just sometimes hard to understand exactly what ones intentions are when writing. When you think of it, it is a little crazy how much time we spend texting and writing and if we just spoke it could probably be resolved in a few minutes!

Yes, your approach is sound and it should work. In any case you would need to create a wifi hotspot on your phone  and then either use the wifi adapter on the BBB or a stand-alone Ethernet to wifi adapter. The one mentioned -

http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP

or here is a more expensive one but name brand unit -

http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPBRRW

If you get the wifi adapter for the BBB that is mentioned and supported in the docs I see no reason for the external adapter. Either way the wifi would need to be setup to talk to your phone hotspot.

No mater how you do this you probably won't have the ability to do incoming port forwarding so you will only have outgoing connection capability which is probably fine in most cases.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Thu, 6 Nov 2014 14:26:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

Maybe my terminology is off or I didn't communicate that I'd be using my android phone to broadcast wifi in a fixed locations that are known to have stable/reliable signal.  I was planning to use some sort of wifi bridge and then plug the BBB into the bridge.  Please don't assume my reply has a rude tone. Maybe you did understand me and I'm just missing the big picture. I'll take your advice into consideration when I try to test this. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/5f15bbbe/attachment.html>

From mark at micro-node.com  Fri Nov  7 00:00:24 2014
From: mark at micro-node.com (Mark Guibord)
Date: Thu, 6 Nov 2014 16:00:24 -0800
Subject: [App_rpt-users] Portanode
In-Reply-To: <CNqB1p00r0UUS9J01NqCsN>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>,
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>,
	<CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
	<CNqB1p00r0UUS9J01NqCsN>
Message-ID: <005801cffa1d$d5873fc0$8095bf40$@com>

 

Since the BBB has only one USB port you will have to use an external hub or
switch to allow connection of the sound dongle and the WiFi adapter if you
go with the one supported in the documentation. My suggestion is to use the
Vonet VAR11N Mini Bridge/Wireless router or similar unit. I  believe these
units support multiple wireless hotspot connections in a prioritized manner.
This mean that if you setup multiple SSID's and passwords for different WiFi
hotspots the unit will connect to whatever hotspot is available at the time.

 

Mark

K7IZA

http://micro-node.com

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 2:42 PM
To: Robert Newberry; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

 

Robert,

No not at all as far as tone. It is just sometimes hard to understand
exactly what ones intentions are when writing. When you think of it, it is a
little crazy how much time we spend texting and writing and if we just spoke
it could probably be resolved in a few minutes!

Yes, your approach is sound and it should work. In any case you would need
to create a wifi hotspot on your phone  and then either use the wifi adapter
on the BBB or a stand-alone Ethernet to wifi adapter. The one mentioned -

http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1
535523722
<http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=
1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=A
TVPDKIKX0DER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP>
&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=ATVPDKIKX0D
ER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP

or here is a more expensive one but name brand unit -

http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPB
RRW

If you get the wifi adapter for the BBB that is mentioned and supported in
the docs I see no reason for the external adapter. Either way the wifi would
need to be setup to talk to your phone hotspot.

No mater how you do this you probably won't have the ability to do incoming
port forwarding so you will only have outgoing connection capability which
is probably fine in most cases.

73 Doug
WA3DSP
http://www.crompton.com/hamradio



  _____  

Date: Thu, 6 Nov 2014 14:26:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

Maybe my terminology is off or I didn't communicate that I'd be using my
android phone to broadcast wifi in a fixed locations that are known to have
stable/reliable signal.  I was planning to use some sort of wifi bridge and
then plug the BBB into the bridge.  Please don't assume my reply has a rude
tone. Maybe you did understand me and I'm just missing the big picture. I'll
take your advice into consideration when I try to test this. 


_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button" You do not need a password to unsubscribe, you can
do it via email confirmation. If you have trouble unsubscribing, please send
a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/dfcb5380/attachment.html>

From doug at crompton.com  Fri Nov  7 01:14:04 2014
From: doug at crompton.com (Doug Crompton)
Date: Thu, 6 Nov 2014 20:14:04 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <005801cffa1d$d5873fc0$8095bf40$@com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>,
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>,
	<CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
	<CNqB1p00r0UUS9J01NqCsN>,<005801cffa1d$d5873fc0$8095bf40$@com>
Message-ID: <BLU172-W31668508B7EAD9DD2D5502BA850@phx.gbl>

Mark,

 Yes, you would need to use a hub to run the wifi dongle on the BBB but the vonet would also need power which could come from a usb port or a stand-alone power source. Having a hub on the BBB is not a bad thing though as it allows the use of a USB memory stick for backup and additional storage as well as other USB devices you might want to support.

The wifi on the BBB will also support multiple wifi connections. So it is really a tossup as both methods have advantages and disadvantages.
In either case if you want to take it on the road you would still have to deal with the fact that most "free" wifi hotspots do require some user intervention, like access through a web page, for authorization.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: mark at micro-node.com
To: doug at crompton.com; n1xbm at amsat.org; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode
Date: Thu, 6 Nov 2014 16:00:24 -0800

 Since the BBB has only one USB port you will have to use an external hub or switch to allow connection of the sound dongle and the WiFi adapter if you go with the one supported in the documentation. My suggestion is to use the Vonet VAR11N Mini Bridge/Wireless router or similar unit. I  believe these units support multiple wireless hotspot connections in a prioritized manner. This mean that if you setup multiple SSID's and passwords for different WiFi hotspots the unit will connect to whatever hotspot is available at the time. MarkK7IZAhttp://micro-node.com  From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 2:42 PM
To: Robert Newberry; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode Robert,

No not at all as far as tone. It is just sometimes hard to understand exactly what ones intentions are when writing. When you think of it, it is a little crazy how much time we spend texting and writing and if we just spoke it could probably be resolved in a few minutes!

Yes, your approach is sound and it should work. In any case you would need to create a wifi hotspot on your phone  and then either use the wifi adapter on the BBB or a stand-alone Ethernet to wifi adapter. The one mentioned -

http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP

or here is a more expensive one but name brand unit -

http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPBRRW

If you get the wifi adapter for the BBB that is mentioned and supported in the docs I see no reason for the external adapter. Either way the wifi would need to be setup to talk to your phone hotspot.

No mater how you do this you probably won't have the ability to do incoming port forwarding so you will only have outgoing connection capability which is probably fine in most cases.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

Date: Thu, 6 Nov 2014 14:26:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] PortanodeMaybe my terminology is off or I didn't communicate that I'd be using my android phone to broadcast wifi in a fixed locations that are known to have stable/reliable signal.  I was planning to use some sort of wifi bridge and then plug the BBB into the bridge.  Please don't assume my reply has a rude tone. Maybe you did understand me and I'm just missing the big picture. I'll take your advice into consideration when I try to test this. 

_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/47fbea84/attachment.html>

From mark at micro-node.com  Fri Nov  7 05:11:43 2014
From: mark at micro-node.com (Mark Guibord)
Date: Thu, 6 Nov 2014 21:11:43 -0800
Subject: [App_rpt-users] Portanode
In-Reply-To: <CRE81p00u0UUS9J01RE9kz>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>,
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>,
	<CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
	<CNqB1p00r0UUS9J01NqCsN>,
	<005801cffa1d$d5873fc0$8095bf40$@com> <CRE81p00u0UUS9J01RE9kz>
Message-ID: <007201cffa49$52a38b00$f7eaa100$@com>

Doug,

 

Agreed there are many advantages to using a hub with multiple ports, I just
wanted to make sure he was aware there is only one USB port available on the
BBB.

 

BTW... I want congratulate and thank you and all that have worked to put
this image together for the BBB it works great.  We have used it to host
multiple RTCM's simultaneously without a hitch.

 

Mark

K7IZA

http://micro-node.com

 

 

From: outlook_97fc649978f54bf0 at outlook.com
[mailto:outlook_97fc649978f54bf0 at outlook.com] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 5:14 PM
To: Mark Guibord; 'Robert Newberry'; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode

 

Mark,

 Yes, you would need to use a hub to run the wifi dongle on the BBB but the
vonet would also need power which could come from a usb port or a
stand-alone power source. Having a hub on the BBB is not a bad thing though
as it allows the use of a USB memory stick for backup and additional storage
as well as other USB devices you might want to support.

The wifi on the BBB will also support multiple wifi connections. So it is
really a tossup as both methods have advantages and disadvantages.

In either case if you want to take it on the road you would still have to
deal with the fact that most "free" wifi hotspots do require some user
intervention, like access through a web page, for authorization.

73 Doug
WA3DSP
http://www.crompton.com/hamradio



  _____  

From: mark at micro-node.com
To: doug at crompton.com; n1xbm at amsat.org; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode
Date: Thu, 6 Nov 2014 16:00:24 -0800

 

Since the BBB has only one USB port you will have to use an external hub or
switch to allow connection of the sound dongle and the WiFi adapter if you
go with the one supported in the documentation. My suggestion is to use the
Vonet VAR11N Mini Bridge/Wireless router or similar unit. I  believe these
units support multiple wireless hotspot connections in a prioritized manner.
This mean that if you setup multiple SSID's and passwords for different WiFi
hotspots the unit will connect to whatever hotspot is available at the time.

 

Mark

K7IZA

http://micro-node.com

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 2:42 PM
To: Robert Newberry; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

 

Robert,

No not at all as far as tone. It is just sometimes hard to understand
exactly what ones intentions are when writing. When you think of it, it is a
little crazy how much time we spend texting and writing and if we just spoke
it could probably be resolved in a few minutes!

Yes, your approach is sound and it should work. In any case you would need
to create a wifi hotspot on your phone  and then either use the wifi adapter
on the BBB or a stand-alone Ethernet to wifi adapter. The one mentioned -

http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1
535523722
<http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=
1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=A
TVPDKIKX0DER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP>
&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=ATVPDKIKX0D
ER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP

or here is a more expensive one but name brand unit -

http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPB
RRW

If you get the wifi adapter for the BBB that is mentioned and supported in
the docs I see no reason for the external adapter. Either way the wifi would
need to be setup to talk to your phone hotspot.

No mater how you do this you probably won't have the ability to do incoming
port forwarding so you will only have outgoing connection capability which
is probably fine in most cases.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

  _____  

Date: Thu, 6 Nov 2014 14:26:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode

Maybe my terminology is off or I didn't communicate that I'd be using my
android phone to broadcast wifi in a fixed locations that are known to have
stable/reliable signal.  I was planning to use some sort of wifi bridge and
then plug the BBB into the bridge.  Please don't assume my reply has a rude
tone. Maybe you did understand me and I'm just missing the big picture. I'll
take your advice into consideration when I try to test this. 


_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button" You do not need a password to unsubscribe, you can
do it via email confirmation. If you have trouble unsubscribing, please send
a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141106/87c26958/attachment.html>

From doug at crompton.com  Fri Nov  7 14:39:16 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 7 Nov 2014 09:39:16 -0500
Subject: [App_rpt-users] Portanode
In-Reply-To: <007201cffa49$52a38b00$f7eaa100$@com>
References: <CAM09xEYKp3OiCHqfv9sgBKdHSERZn186Gk8nFXHJ4PDF72Tavg@mail.gmail.com>,
	<00ab01cff98a$334c5f80$99e51e80$@com>,
	<CAM09xEb+5-Hc1U6kXMTpNKOnbJqUzwwXkuWvRV_VF0K1dB-prg@mail.gmail.com>,
	<BLU172-W18F9F255C9FC2236ACCC63BA840@phx.gbl>,
	<CAM09xEY_sKN27y=DfUZEnu1B689MPomTdMSB=rWAJvwGmJC2NQ@mail.gmail.com>
	<CNqB1p00r0UUS9J01NqCsN>,<005801cffa1d$d5873fc0$8095bf40$@com>
	<CRE81p00u0UUS9J01RE9kz>,<007201cffa49$52a38b00$f7eaa100$@com>
Message-ID: <BLU172-W21D0DEF78B7D1C82919D33BA850@phx.gbl>

Mark,

  Thanks for the kind comments on the BBB. It is a labor of love and we are very happy it turned out the way it did and hopefully much more to come.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: mark at micro-node.com
To: doug at crompton.com; n1xbm at amsat.org; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode
Date: Thu, 6 Nov 2014 21:11:43 -0800

Doug, Agreed there are many advantages to using a hub with multiple ports, I just wanted to make sure he was aware there is only one USB port available on the BBB. BTW... I want congratulate and thank you and all that have worked to put this image together for the BBB it works great.  We have used it to host multiple RTCM's simultaneously without a hitch. MarkK7IZAhttp://micro-node.com  From: outlook_97fc649978f54bf0 at outlook.com [mailto:outlook_97fc649978f54bf0 at outlook.com] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 5:14 PM
To: Mark Guibord; 'Robert Newberry'; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode Mark,

 Yes, you would need to use a hub to run the wifi dongle on the BBB but the vonet would also need power which could come from a usb port or a stand-alone power source. Having a hub on the BBB is not a bad thing though as it allows the use of a USB memory stick for backup and additional storage as well as other USB devices you might want to support.

The wifi on the BBB will also support multiple wifi connections. So it is really a tossup as both methods have advantages and disadvantages.
In either case if you want to take it on the road you would still have to deal with the fact that most "free" wifi hotspots do require some user intervention, like access through a web page, for authorization.

73 Doug
WA3DSP
http://www.crompton.com/hamradio

From: mark at micro-node.com
To: doug at crompton.com; n1xbm at amsat.org; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Portanode
Date: Thu, 6 Nov 2014 16:00:24 -0800 Since the BBB has only one USB port you will have to use an external hub or switch to allow connection of the sound dongle and the WiFi adapter if you go with the one supported in the documentation. My suggestion is to use the Vonet VAR11N Mini Bridge/Wireless router or similar unit. I  believe these units support multiple wireless hotspot connections in a prioritized manner. This mean that if you setup multiple SSID's and passwords for different WiFi hotspots the unit will connect to whatever hotspot is available at the time. MarkK7IZAhttp://micro-node.com  From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Doug Crompton
Sent: Thursday, November 06, 2014 2:42 PM
To: Robert Newberry; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Portanode Robert,

No not at all as far as tone. It is just sometimes hard to understand exactly what ones intentions are when writing. When you think of it, it is a little crazy how much time we spend texting and writing and if we just spoke it could probably be resolved in a few minutes!

Yes, your approach is sound and it should work. In any case you would need to create a wifi hotspot on your phone  and then either use the wifi adapter on the BBB or a stand-alone Ethernet to wifi adapter. The one mentioned -

http://www.amazon.com/gp/product/B00H4WMZ1O/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00C08GTA0&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=05BRWWZ8BFR6JAGX7MZP

or here is a more expensive one but name brand unit -

http://www.amazon.com/NETGEAR-Universal-Ethernet-Adapter-WNCE2001/dp/B003KPBRRW

If you get the wifi adapter for the BBB that is mentioned and supported in the docs I see no reason for the external adapter. Either way the wifi would need to be setup to talk to your phone hotspot.

No mater how you do this you probably won't have the ability to do incoming port forwarding so you will only have outgoing connection capability which is probably fine in most cases.

73 Doug
WA3DSP
http://www.crompton.com/hamradioDate: Thu, 6 Nov 2014 14:26:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] PortanodeMaybe my terminology is off or I didn't communicate that I'd be using my android phone to broadcast wifi in a fixed locations that are known to have stable/reliable signal.  I was planning to use some sort of wifi bridge and then plug the BBB into the bridge.  Please don't assume my reply has a rude tone. Maybe you did understand me and I'm just missing the big picture. I'll take your advice into consideration when I try to test this. 
_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141107/3d611fb3/attachment.html>

From tim.sawyer at mac.com  Fri Nov  7 16:15:42 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Fri, 07 Nov 2014 08:15:42 -0800
Subject: [App_rpt-users] Public node as a gateway..
In-Reply-To: <CAO8AawqFSqRBN2kggTHPg_ackQxP=kYqWK1SnaCX90QsZYKdYw@mail.gmail.com>
References: <CAO8AawqFSqRBN2kggTHPg_ackQxP=kYqWK1SnaCX90QsZYKdYw@mail.gmail.com>
Message-ID: <7FEE4941-F250-483C-8E7A-318977E0D162@mac.com>

If you?re not on the gateway node then yes, you have to do the *4xxxx ?by your command? bit. You could set that up as a macro.  For example if 1000 will be the private node and 2000 the public.

[macro]
1 = *31000*41000*32000# 

now *51 will connect to the public node. 

You could put the IP address of the gateway in each of your private nodes (and visa versa) which would save the whole *4 thing to connect to the gateway. But you?d still need to do *4 to connect the public node to other public nodes. 

--
Tim
:wq

> On Nov 7, 2014, at 6:59 AM, Sam Nabkey <sam.nabkey at gmail.com> wrote:
> 
> Can you share how you would configure the private modes to use the public as a gateway?
> 
> I am doing something similar but I command the public node to connect to another public using the *4 commands. .
> 
> Do you know of a direct way? 
> 
>     

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141107/47250144/attachment.html>

From N1XBM at amsat.org  Tue Nov 11 15:41:20 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Tue, 11 Nov 2014 10:41:20 -0500
Subject: [App_rpt-users] Bandwidth usage
In-Reply-To: <CAM09xEYPX6mPbNPDbJUfsyn+gzWm2eNihQATHWMZND8vXzQAMg@mail.gmail.com>
References: <CAM09xEYPX6mPbNPDbJUfsyn+gzWm2eNihQATHWMZND8vXzQAMg@mail.gmail.com>
Message-ID: <CAM09xEZV=nGon2-jsousDGh7OrThSfkXrhk6hh5GuyjRJLHMCg@mail.gmail.com>

I am talking with a site owner about connecting a repeater currently at his
site to the allstar network. He is on board with the idea but asked how
much bandwidth will be needed. I found this website.  Is this still an
accurate measurement of my needs?

http://docs.allstarlink.org/drupal/node/145
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/07c47b4a/attachment.html>

From doug at crompton.com  Tue Nov 11 16:19:22 2014
From: doug at crompton.com (Doug Crompton)
Date: Tue, 11 Nov 2014 11:19:22 -0500
Subject: [App_rpt-users] Bandwidth usage
In-Reply-To: <CAM09xEZV=nGon2-jsousDGh7OrThSfkXrhk6hh5GuyjRJLHMCg@mail.gmail.com>
References: <CAM09xEYPX6mPbNPDbJUfsyn+gzWm2eNihQATHWMZND8vXzQAMg@mail.gmail.com>,
	<CAM09xEZV=nGon2-jsousDGh7OrThSfkXrhk6hh5GuyjRJLHMCg@mail.gmail.com>
Message-ID: <BLU172-W186954D4FE7D8248875820BA810@phx.gbl>

Robert,

 Yes it is an accurate spec, but remember that EACH connection would take the additional BW. If you expect a lot of connections you could keep it down by using an external server at a location where BW is abundant and only connecting the repeater server to that external server. The repeater server could be unlisted so no one would know about it and you could advertise the external server like it was the repeater. A single G726 connection would go unnoticed on anything but the slowest Internet connections today. Maybe if he is running the slowest DSL and there is a lot of other traffic it might be an impact but probably not otherwise.
Between BBB's, and to PC's if installed on any Acid release, you can run the ilbc codec which is darn near indistinguishable from G726 with about 1/3 the BW.  

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Tue, 11 Nov 2014 10:41:20 -0500
From: N1XBM at amsat.org
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Bandwidth usage

I am talking with a site owner about connecting a repeater currently at his site to the allstar network. He is on board with the idea but asked how much bandwidth will be needed. I found this website.  Is this still an accurate measurement of my needs?
http://docs.allstarlink.org/drupal/node/145

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/bea9d132/attachment.html>

From kk6ecm at gmail.com  Tue Nov 11 21:51:33 2014
From: kk6ecm at gmail.com (kk6ecm)
Date: Tue, 11 Nov 2014 13:51:33 -0800
Subject: [App_rpt-users] EchoLink Policy Reminder
References: <CAAoTdQKr=pboo65cimyiQE2UJGRGatiC7nMVVvLjBfsDJPQD2Q@mail.gmail.com>
Message-ID: <39375883-A7AD-4A8F-B8A0-D33C008A4645@gmail.com>

Can anyone shed light on this Echolink requirement and Allstar? I'm not sure what makes us compliant. We have Echolink enabled on our repeater... I know of no way a non-ham could link in during an Echolink connection. Is there a way of setting app_rpt so an Echolink connection precludes all others? Also, Echolink has Apps for the PC, Android, and the iPhone/iPad... Their PC app (phones are RF, but not ham) seems to invalidate their rf only policy, although they do verify a license before granting a node number. What am I missing?

Thanks,
Bob
kk6ecm

Sent from iPad

> 
> ---------- Forwarded message ----------
> From: EchoLink Support <support at echolink.org>
> Date: Wed, Sep 3, 2014 at 9:14 AM
> Subject: EchoLink Policy Reminder
> To: 
> 
> 
> We wanted to remind you of an important item in EchoLink's access policies (which can be found online at http://www.echolink.org/access_policies.htm).
> 
> In general, EchoLink does not permit cross-linking.
> 
> More specifically, EchoLink does not permit cross-linking with other VoIP systems that can be accessed off-the-air (for example, directly from a PC or Web browser).  This is because other systems may have a validation procedure that is far less comprehensive than EchoLink's, and we want to continue to ensure that EchoLink is solely for use by licensed Amateur Radio operators around the world.
> 
> Therefore, while excellent systems such as Zello, AllStar, eQSO, WIRES-II, etc. all serve an important purpose within the Amateur Radio community, our policy is that they cannot be directly connected to a registered EchoLink node.
> 
> In other words, your node must function only as a direct RF gateway, and not as a cross-link to another system. If your node is reachable through another path, that path must be disabled when an EchoLink connection is in progress. For example, an EchoIRLP node is permitted, since it functions only as an RF gateway when an EchoLink connection is made.
> 
> If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.
> 
> Thanks for ensuring that your node adheres to this policy. In some cases we do restrict logins to be sure the policy is being followed.
> 
> 73
> EchoLink Support
> 
> (Note: This mailbox is not able to handle replies. For help and information, please see www.echolink.org/support.htm)
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/b59762b4/attachment.html>

From wb6egr at gmail.com  Wed Nov 12 00:08:17 2014
From: wb6egr at gmail.com (Kirk Just Kirk)
Date: Tue, 11 Nov 2014 16:08:17 -0800
Subject: [App_rpt-users] EchoLink Policy Reminder
In-Reply-To: <39375883-A7AD-4A8F-B8A0-D33C008A4645@gmail.com>
References: <CAAoTdQKr=pboo65cimyiQE2UJGRGatiC7nMVVvLjBfsDJPQD2Q@mail.gmail.com>
	<39375883-A7AD-4A8F-B8A0-D33C008A4645@gmail.com>
Message-ID: <CAPN8dryw8mh5Ze04Mfe7A9OZGhYtDGSnRwTef-B93x5d8SSNrg@mail.gmail.com>

They can close/kill my account anytime. EchoStink sounds horrible most of
the time...constant drivebys from dingalings that connect and disconnect
over and over and say nothing...or connect at 3 in the morning and call CQ
CQ. For 5 minutes.....I am so tired of that shit I could delete it tonight.
 On Nov 11, 2014 2:00 PM, "kk6ecm" <kk6ecm at gmail.com> wrote:

> Can anyone shed light on this Echolink requirement and Allstar? I'm not
> sure what makes us compliant. We have Echolink enabled on our repeater... I
> know of no way a non-ham could link in during an Echolink connection. Is
> there a way of setting app_rpt so an Echolink connection precludes all
> others? Also, Echolink has Apps for the PC, Android, and the iPhone/iPad...
> Their PC app (phones are RF, but not ham) seems to invalidate their rf only
> policy, although they do verify a license before granting a node number.
> What am I missing?
>
> Thanks,
> Bob
> kk6ecm
>
> Sent from iPad
>
>
> ---------- Forwarded message ----------
> From: EchoLink Support <support at echolink.org>
> Date: Wed, Sep 3, 2014 at 9:14 AM
> Subject: EchoLink Policy Reminder
> To:
>
>
> We wanted to remind you of an important item in EchoLink's access policies
> (which can be found online at http://www.echolink.org/access_policies.htm
> ).
>
> In general, EchoLink does not permit cross-linking.
>
> More specifically, EchoLink does not permit cross-linking with other VoIP
> systems that can be accessed off-the-air (for example, directly from a PC
> or Web browser).  This is because other systems may have a validation
> procedure that is far less comprehensive than EchoLink's, and we want to
> continue to ensure that EchoLink is solely for use by licensed Amateur
> Radio operators around the world.
>
> Therefore, while excellent systems such as Zello, AllStar, eQSO, WIRES-II,
> etc. all serve an important purpose within the Amateur Radio community, our
> policy is that they cannot be directly connected to a registered EchoLink
> node.
>
> In other words, your node must function only as a direct RF gateway, and
> not as a cross-link to another system. If your node is reachable through
> another path, that path must be disabled when an EchoLink connection is in
> progress. For example, an EchoIRLP node is permitted, since it functions
> only as an RF gateway when an EchoLink connection is made.
>
> If you are running Asterisk with app_rpt and an EchoLink channel, be sure
> it is configured not to allow other VoIP connections when an EchoLink
> station is connected. If this isn't practical, please disable the EchoLink
> channel.
>
> Thanks for ensuring that your node adheres to this policy. In some cases
> we do restrict logins to be sure the policy is being followed.
>
> 73
> EchoLink Support
>
> (Note: This mailbox is not able to handle replies. For help and
> information, please see www.echolink.org/support.htm)
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/a4afc073/attachment.html>

From kk6ecm at gmail.com  Wed Nov 12 03:13:12 2014
From: kk6ecm at gmail.com (Bob)
Date: Tue, 11 Nov 2014 19:13:12 -0800
Subject: [App_rpt-users] Echolink and app_rpt: Looking for more information
	on permit=*-*
Message-ID: <8B46018EE1E44951A42478AAF5B24CD5@ThePykesHP>

OK... Echolink quality aside, I'm looking for some clarification how app_rpt
works with Echolink.

 

Attempting to understand the statement from Echolink, "If you are running
Asterisk with app_rpt and an EchoLink channel, be sure it is configured not
to allow other VoIP connections when an EchoLink station is connected. If
this isn't practical, please disable the EchoLink channel." It seems that
"other VoIP" means non-Echolink nodes; not sure how Allstar can do this.

 

How does permit=*-* ("prohibit computer-based connections") work with an
incoming Echolink computer based node, or with an app_rpt hosted Echolink
node in an Echolink to Echolink configuration. When the user enters *33 to
connect, is it actually Echolink nodes connecting, or is there a difference?

 

I think I get their point they don't want an Allstar node with Echolink
node, to simultaneously connect to another Allstar node that does not
support Echolink, but not sure why... still licensed amateurs involved.

 

I am dismayed with Echolink's assertion that the use of a copy of a paper
license is more official than the FCC recognized ULS site, which it appears
Allstarlink.org uses to validate the users license. 

 

Thanks,

Bob

kk6ecm

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/4e5699dd/attachment.html>

From doug at crompton.com  Wed Nov 12 03:43:37 2014
From: doug at crompton.com (Doug Crompton)
Date: Tue, 11 Nov 2014 22:43:37 -0500
Subject: [App_rpt-users] EchoLink Policy Reminder
In-Reply-To: <CAPN8dryw8mh5Ze04Mfe7A9OZGhYtDGSnRwTef-B93x5d8SSNrg@mail.gmail.com>
References: <CAAoTdQKr=pboo65cimyiQE2UJGRGatiC7nMVVvLjBfsDJPQD2Q@mail.gmail.com>,
	<39375883-A7AD-4A8F-B8A0-D33C008A4645@gmail.com>,
	<CAPN8dryw8mh5Ze04Mfe7A9OZGhYtDGSnRwTef-B93x5d8SSNrg@mail.gmail.com>
Message-ID: <BLU172-W249CEA40A17C1A03460072BA8E0@phx.gbl>

We have been through this before. There was just a long winded discussion on here about this about a month ago. My advice is disregard. We don't do anything illegal nor do we allow non hams. We police the Allstar networks as well as anyone else. If anything the trash, both audio and people quality, is on echolink. So if anyone should have a restriction it should be us not allowing them! I personally have never heard anything illegal on any of my nodes other than someone maybe not identifying properly. 

Please don't turn this is into another big discussion. It is not worth it. If you feel like obeying their crazy rules then just do what they say, if not then business as usual. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Tue, 11 Nov 2014 16:08:17 -0800
From: wb6egr at gmail.com
To: kk6ecm at gmail.com
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] EchoLink Policy Reminder

They can close/kill my account anytime. EchoStink sounds horrible most of the time...constant drivebys from dingalings that connect and disconnect over and over and say nothing...or connect at 3 in the morning and call CQ CQ. For 5 minutes.....I am so tired of that shit I could delete it tonight.


On Nov 11, 2014 2:00 PM, "kk6ecm" <kk6ecm at gmail.com> wrote:
Can anyone shed light on this Echolink requirement and Allstar? I'm not sure what makes us compliant. We have Echolink enabled on our repeater... I know of no way a non-ham could link in during an Echolink connection. Is there a way of setting app_rpt so an Echolink connection precludes all others? Also, Echolink has Apps for the PC, Android, and the iPhone/iPad... Their PC app (phones are RF, but not ham) seems to invalidate their rf only policy, although they do verify a license before granting a node number. What am I missing?

Thanks,Bobkk6ecm
Sent from iPad

---------- Forwarded message ----------
From: EchoLink Support <support at echolink.org>
Date: Wed, Sep 3, 2014 at 9:14 AM
Subject: EchoLink Policy Reminder
To: 


We wanted to remind you of an important item in EchoLink's access policies (which can be found online at http://www.echolink.org/access_policies.htm).



In general, EchoLink does not permit cross-linking.



More specifically, EchoLink does not permit cross-linking with other VoIP systems that can be accessed off-the-air (for example, directly from a PC or Web browser).  This is because other systems may have a validation procedure that is far less comprehensive than EchoLink's, and we want to continue to ensure that EchoLink is solely for use by licensed Amateur Radio operators around the world.



Therefore, while excellent systems such as Zello, AllStar, eQSO, WIRES-II, etc. all serve an important purpose within the Amateur Radio community, our policy is that they cannot be directly connected to a registered EchoLink node.



In other words, your node must function only as a direct RF gateway, and not as a cross-link to another system. If your node is reachable through another path, that path must be disabled when an EchoLink connection is in progress. For example, an EchoIRLP node is permitted, since it functions only as an RF gateway when an EchoLink connection is made.



If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.



Thanks for ensuring that your node adheres to this policy. In some cases we do restrict logins to be sure the policy is being followed.



73

EchoLink Support



(Note: This mailbox is not able to handle replies. For help and information, please see www.echolink.org/support.htm)




_______________________________________________

App_rpt-users mailing list

App_rpt-users at ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/d03b51ce/attachment.html>

From mike at midnighteng.com  Wed Nov 12 04:15:26 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Tue, 11 Nov 2014 21:15:26 -0700
Subject: [App_rpt-users]
 =?utf-8?q?Echolink_and_app=5Frpt=3A_Looking_for_m?=
 =?utf-8?q?ore_information_on_permit=3D*-*?=
Message-ID: <20141111211526.71befee5dbd13c5325dd1a521b4e73ee.123621cf94.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141111/faf9fcc8/attachment.html>

From doug at crompton.com  Wed Nov 12 06:13:18 2014
From: doug at crompton.com (Doug Crompton)
Date: Wed, 12 Nov 2014 01:13:18 -0500
Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
 information on permit=*-*
In-Reply-To: <20141111211526.71befee5dbd13c5325dd1a521b4e73ee.123621cf94.wbe@email06.secureserver.net>
References: <20141111211526.71befee5dbd13c5325dd1a521b4e73ee.123621cf94.wbe@email06.secureserver.net>
Message-ID: <BLU172-W19837214FDCAE8C7475FA8BA8E0@phx.gbl>

Mike,

 I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...

They say....

"If you 
are running Asterisk with app_rpt and an EchoLink channel, be sure it is
 configured not to allow other VoIP connections when an EchoLink station
 is connected."

They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.

Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.

My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: mike at midnighteng.com
To: App_rpt-users at ohnosec.org
Date: Tue, 11 Nov 2014 21:15:26 -0700
Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*


Like many times before you, you don't seem to understand their statement.So nobody needs to go off on a tangent again.
You only need to be concerned if you do something like"have a web portal to your system that has no limitation to who uses it" (as in non-hams).

If you do then they have the possibility to use the echolink system through your system and that is what they do not want.
Neither do we with allstar or via radio.I'm sure there are a few bad actors out there somewhere allowing access.just make sure it is not you.

They could use better wording to keep the confusion/fuss down.
As far as permit or deny...permit= a list that only allows calls you place in the list to connect.deny= a list of calls that can not connect.See the drupal site for info.

...mike/kb8jnm


-------- Original Message --------

Subject: [App_rpt-users] Echolink and app_rpt: Looking for more

information on permit=*-*

From: "Bob" <kk6ecm at gmail.com>

Date: Tue, November 11, 2014 10:13 pm

To: <App_rpt-users at ohnosec.org>



             OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.   Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.   How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?   I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.   I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org uses to validate the users license.    Thanks, Bob kk6ecm         _______________________________________________

App_rpt-users mailing list

App_rpt-users at ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/9d5629f3/attachment.html>

From mike at midnighteng.com  Wed Nov 12 10:28:15 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Wed, 12 Nov 2014 03:28:15 -0700
Subject: [App_rpt-users]
 =?utf-8?q?Echolink_and_app=5Frpt=3A_Looking_for_m?=
 =?utf-8?q?ore_information_on_permit=3D*-*?=
Message-ID: <20141112032815.71befee5dbd13c5325dd1a521b4e73ee.1ec6625177.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/4d69374d/attachment.html>

From mike at midnighteng.com  Wed Nov 12 11:36:14 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Wed, 12 Nov 2014 04:36:14 -0700
Subject: [App_rpt-users]
 =?utf-8?q?Echolink=5Fand=5Fapp=5Frpt=3A=5FLooking?=
 =?utf-8?q?=5Ffor=5Fm_ore=5Finformation=5Fon=5Fpermit=3D*-*?=
Message-ID: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/702b184a/attachment.html>

From electricity440 at gmail.com  Wed Nov 12 13:22:29 2014
From: electricity440 at gmail.com (Skyler F)
Date: Wed, 12 Nov 2014 06:22:29 -0700
Subject: [App_rpt-users] How to setup Allstar Monitor
Message-ID: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>

I downloaded the files for allstar monitor, and pasted them in my http
directory. I also renamed the almon.ini.txt to almon.ini and changed the
node number to mine.

I loaded up the localhost webpage, and it displayed my node number and the
frequency but said "loading" under it and then "could not connect"

Does anyone have any other info on setting up allmon or troubleshooting? Am
I correct that it will allow me to control the node (connect, disconnect
etc.) via the internet? (I will use http password protect to prevent
unwanted node controllers)


Thanks,
Skyler KD?WHB
-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/f2f0bb5b/attachment.html>

From bdboyle at bdboyle.com  Wed Nov 12 13:46:58 2014
From: bdboyle at bdboyle.com (Bryan D. Boyle)
Date: Wed, 12 Nov 2014 08:46:58 -0500
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
Message-ID: <6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>

simple solution, considering the clueless majority of users in the Echolink world, the lousy audio codecs, and the ancient technology that has not kept pace with either praxis or software advances: turn the damn thing off.  

You won't miss the drive-bys, distorted computer audio, fumble-fingered operators, and bandwidth usage.

It's just so not worth the effort to maintain, worry about the software and technology use conditions, or anything else surrounding it.  It's just amateur radio, not the launch codes.

</grump>

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



> On Nov 12, 2014, at 06:36, <mike at midnighteng.com> <mike at midnighteng.com> wrote:
> 
> 
> Additional info (as if the first was not enough)...
> 
> I went to their (echolink) website looking for a rule...
> 
> Here it is...
> 
> Item #4
> Stations operating in Sysop mode may interconnect EchoLink only with equipment operating on Amateur frequencies.  EchoLink does not permit use of the system with other services such as GMRS, FRS, or MARS.  For security reasons, it is also not permitted to interconnect EchoLink with other VoIP systems that support direct access from a computer.
> 
> 
> found on their access policy page at...
> 
> echolink.org/access_policies.htm
> 
> There is no mention of other systems interconnect, just the VoIP via computer direct.
> I take the meaning of direct to mean "unverified" or unrestricted.
> This is consistent with the way I have been reading the poorly written emails some of you get from echolink.
> 
> 
> ...mike/kb8jnm
> 
> 
> 
> 
> -------- Original Message --------
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> From: <mike at midnighteng.com>
> Date: Wed, November 12, 2014 5:28 am
> To: app_rpt-users at ohnosec.org, "Bob" <kk6ecm at gmail.com>
> 
> 
> Bob, Doug and all,
> 
> I fully understand why you would think that. It is so poorly written.
> And as I have watched this conversation get out of hand at least 2 times as you have Doug.
> 
> This is the first time I thought I would clarify how I was reading their email statement before anyone gets elevated on it again.
> 
> other VoIP connections not Radio Sourced RoIP connections and only if you can't verify the VoIP.
> 
> They are saying VOIP connections from non-radio sources...ie phone and web portal without a security check. I have many non-experimental phone and web ports but nobody knows what it is so it is not a open port. I don't provide links to it from a web page or post a phone number and it "does" have multilevel security checks. Even if folks stumbled on it by accident or not, they would not have open access.
> 
> There are a lot of folks experimenting with asterisk side of the set-up. Many of us that have been using asterisk for many years know that we can port just about any kind of streaming audio or other services to asterisk and thereby app_rpt. Hard to tell what interfaces/ports are open on them and to where they go.
> Because some folks don't think about the implications of their actions, things happen. We all know that even from the radio side of the equation.
> 
> Problems can also occur if a unauthorized station/system is connected to others who are connected to you and there is no way to track that on the echolink side.
> 
> They are asking that when "you" have a open port like that (unverified VoIP), to disable the echolink port while it is active so a unverified user does not get access to echolink through VoIP, not RoIP or Radio. And I'm sure we feel the same way about that through allstar.
> 
> By the way some of you guys are interpreting this, the iPhone and Android apps and/or repeater to repeater echolink connects and PC to PC echolink connects would not be legal to them.
> 
> Has anyone ever asked them to clarify the statement? Please tell us/me "exactly" what they said !
> 
> If nobody answers that, perhaps one of us needs to ask them so we can set the record straight as most of us use it on our systems and left unanswered definitively, this will come up many more times.
> 
> And perhaps a text of a definitive rule could be included as a default comment in the echolink.conf so there is no ignorance of what they expect if you use it.
> 
> Bob (kk6ecm), you win the prize since you asked the question from the email you received.
> 
> Would you Send them a message/reply to clarify the type of connections "by example" they do not want and ask they not use the text from the email that you do not understand ? or what type of VoIP connections they are speaking of exactly.
> 
> Sure would put a end to the silliness of it time and time again.
> 
> I think what leads folks to get one of those emails is basically a list report of connected systems when a breach has been noticed. Problem is, they have a security problem with some of the proxies on their system. I have seen many a connect through a echo-proxy without an ID (callsign) and more. I don't think anyone could ever know it's true source. Hence the poorly worded generic email notice to all connected systems and obviously, they are not familiar with the other systems to word it correctly.
> 
> Sorry to be long winded, but I don't want to this get elevated again without good reason.
> 
> ...mike/kb8jnm
> 
> -------- Original Message --------
> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
> information on permit=*-*
> From: Doug Crompton <doug at crompton.com>
> Date: Wed, November 12, 2014 1:13 am
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> 
> Mike,
> 
>  I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...
> 
> They say....
> 
> "If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected."
> 
> They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.
> 
> Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.
> 
> My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> From: mike at midnighteng.com
> To: App_rpt-users at ohnosec.org
> Date: Tue, 11 Nov 2014 21:15:26 -0700
> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*
> 
> 
> Like many times before you, you don't seem to understand their statement.
> So nobody needs to go off on a tangent again.
> 
> You only need to be concerned if you do something like
> "have a web portal to your system that has no limitation to who uses it" (as in non-hams).
> 
> If you do then they have the possibility to use the echolink system through your system and that is what they do not want.
> 
> Neither do we with allstar or via radio.
> I'm sure there are a few bad actors out there somewhere allowing access.
> just make sure it is not you.
> 
> They could use better wording to keep the confusion/fuss down.
> 
> As far as permit or deny...
> permit= a list that only allows calls you place in the list to connect.
> deny= a list of calls that can not connect.
> See the drupal site for info.
> 
> ...mike/kb8jnm
> -------- Original Message --------
> Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
> information on permit=*-*
> From: "Bob" <kk6ecm at gmail.com>
> Date: Tue, November 11, 2014 10:13 pm
> To: <App_rpt-users at ohnosec.org>
> 
> OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.
>  
> Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.
>  
> How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?
>  
> I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.
>  
> I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org uses to validate the users license.
>  
> Thanks,
> Bob
> kk6ecm
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/cf9557e2/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 14:25:49 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 06:25:49 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
Message-ID: <0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>

Be sure to download Allmon 2 as it has security improvements and enhancements over Allmon 1. Please note that Allmon 2 does not work with Internet Explorer. Rename allmon.ini.txt to allmon.ini.php and edit the user ID and password to match your manager.conf. 

On your Allstar node edit manager.conf to have the same user ID and password as almond.ini.php and comment the bindaddr= line or set it to your server. bindaddr=127.0.0.1 is ok only if you run Allmon on the same computer as your node. 

Yes, Allmon will allow control of your node via the web. Allmon 1 provided linking control and monitoring. The new control panel in Allmon 2 provides control of any setting Asterisk or app_rpt is capable of doing.  The sample control panel.ini.txt has many examples.

Here?s some more example control panel commands that aren?t in the current sample file: 
labels[] = "Local Telemetry Output Enable"
cmds[] = "rpt cmd %node% cop 33 xxx"
labels[] = "Local Telemetry Output Disable"
cmds[] = "rpt cmd %node% cop 34 xxx"
labels[] = "Local Telemetry Output on Demand"
cmds[] = "rpt cmd %node% cop 35 xxx"
labels[] = "Force ID (local only)"
cmds[] = "rpt cmd %node% status 11 xxx"
labels[] = "Disable Linking"
cmds[] = "rpt cmd %node% cop 12 xxx"
labels[] = "Enable Linking"
cmds[] = "rpt cmd %node% cop 11 xxx"
labels[] = "Disable Autopatch"
cmds[] = "rpt cmd %node% cop 10 xxx"
labels[] = "Enable Autopatch"
cmds[] = "rpt cmd %node% cop 9 xxx"
labels[] = "Disable User Functions"
cmds[] = "rpt cmd %node% cop 18 xxx"
labels[] = "Enable User Functions"
cmds[] = "rpt cmd %node% cop 17 xxx"
labels[] = "System State 0 (normal)"
cmds[] = "rpt cmd %node% cop 14 0"
labels[] = "System State 1 (rpt only)"
cmds[] = "rpt cmd %node% cop 14 1?

If you have RTCMs these are handy:
; VOTER. Replace ?SiteX? with your client?s name 
labels[] = "Show Voter Status"
cmds[] = "voter prio %node%"
labels[] = "Voter All On"
cmds[] = "voter prio %node% all 0"
labels[] = "Voter SiteA Off"
cmds[] = "voter prio %node% siteA -1"
labels[] = "Voter SiteA On"
cmds[] = "voter prio %node% SiteA 0"
labels[] = "Voter SiteB Off"
cmds[] = "voter prio %node% siteB -1"
labels[] = "Voter SiteB On"
cmds[] = "voter prio %node% SiteB 0"

--
Tim WD6AWP

> On Nov 12, 2014, at 5:22 AM, Skyler F <electricity440 at gmail.com> wrote:
> 
> I downloaded the files for allstar monitor, and pasted them in my http directory. I also renamed the almon.ini.txt to almon.ini and changed the node number to mine. 
> 
> I loaded up the localhost webpage, and it displayed my node number and the frequency but said "loading" under it and then "could not connect"
> 
> Does anyone have any other info on setting up allmon or troubleshooting? Am I correct that it will allow me to control the node (connect, disconnect etc.) via the internet? (I will use http password protect to prevent unwanted node controllers)
> 
> 
> Thanks,
> Skyler KD?WHB
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info/>
> KD?WHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/9ec53297/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 14:51:56 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 06:51:56 -0800
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
 ore_information_on_permit=*-*
In-Reply-To: <6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
Message-ID: <61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>

I removed EchoLink. In it?s place we need some smart mobile developer to write a iPhone/Android IAX client with PTT. Anyone????

For now we?re using Zoiper. It?s a bit clunky as you have to do *99 to make PTT and # to unkey. The lack of PTT indication is disconcerting and problematic but it works. The audio is 3,000 times better than EchoLink. And you have control of who connects. Here?s how you set up the node.

In iax.conf add this stanza. Change UserID and UserPassword.

[UserID]
username=UserID
type=friend
context=hams
host=dynamic
auth=md5
secret=UserPassword
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no

In extensions.conf add this stanza. This requires a caller ID or it will not connect. I have my users put their call sign in the caller ID. That way the status pages (including Allmon) shows who is connected with a -P appended.

[hams]
exten => _X!,1,Ringing
exten => _X!,n,NoOp(${CALLERID(name)})
exten => _X!,n,NoOp(${CALLERID(number)})
exten => _X!,n,Set(CALLSIGN=${CALLERID(name)})
exten => _X!,n,GotoIf($[${LEN(${CALLSIGN})} = 0]?hangit)
exten => _X!,n,Wait(3)
exten => _X!,n,Answer
exten => _X!,n,Playback(connecting)
exten => _X!,n,rpt(${EXTEN}|P|${CALLSIGN}-P)
exten => _X!,n(hangit),Answer
exten => _X!,n(hangit),Playback(connection-failed)
exten => _X!,n(hangit),Wait(1)
exten => _X!,n(hangit),Hangup

--
Tim WD6AWP

> On Nov 12, 2014, at 5:46 AM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
> 
> simple solution, considering the clueless majority of users in the Echolink world, the lousy audio codecs, and the ancient technology that has not kept pace with either praxis or software advances: turn the damn thing off.  
> 
> You won't miss the drive-bys, distorted computer audio, fumble-fingered operators, and bandwidth usage.
> 
> It's just so not worth the effort to maintain, worry about the software and technology use conditions, or anything else surrounding it.  It's just amateur radio, not the launch codes.
> 
> </grump>
> 
> --
> Bryan
> Sent from my iPhone 5...No electrons were harmed in the sending of this message.
> 
> 
> 
> On Nov 12, 2014, at 06:36, <mike at midnighteng.com <mailto:mike at midnighteng.com>> <mike at midnighteng.com <mailto:mike at midnighteng.com>> wrote:
> 
>> 
>> Additional info (as if the first was not enough)...
>> 
>> I went to their (echolink) website looking for a rule...
>> 
>> Here it is...
>> 
>> Item #4
>> Stations operating in Sysop mode may interconnect EchoLink only with equipment operating on Amateur frequencies.  EchoLink does not permit use of the system with other services such as GMRS, FRS, or MARS.  For security reasons, it is also not permitted to interconnect EchoLink with other VoIP systems that support direct access from a computer.
>> 
>> 
>> found on their access policy page at...
>> 
>> echolink.org/access_policies.htm <http://echolink.org/access_policies.htm>
>> 
>> There is no mention of other systems interconnect, just the VoIP via computer direct.
>> I take the meaning of direct to mean "unverified" or unrestricted.
>> This is consistent with the way I have been reading the poorly written emails some of you get from echolink.
>> 
>> 
>> ...mike/kb8jnm
>> 
>> 
>> 
>> 
>> -------- Original Message --------
>> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
>> ore_information_on_permit=*-*
>> From: <mike at midnighteng.com <mailto:mike at midnighteng.com>>
>> Date: Wed, November 12, 2014 5:28 am
>> To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>, "Bob" <kk6ecm at gmail.com <mailto:kk6ecm at gmail.com>>
>> 
>> 
>> Bob, Doug and all,
>> 
>> I fully understand why you would think that. It is so poorly written.
>> And as I have watched this conversation get out of hand at least 2 times as you have Doug.
>> 
>> This is the first time I thought I would clarify how I was reading their email statement before anyone gets elevated on it again.
>> 
>> other VoIP connections not Radio Sourced RoIP connections and only if you can't verify the VoIP.
>> 
>> They are saying VOIP connections from non-radio sources...ie phone and web portal without a security check. I have many non-experimental phone and web ports but nobody knows what it is so it is not a open port. I don't provide links to it from a web page or post a phone number and it "does" have multilevel security checks. Even if folks stumbled on it by accident or not, they would not have open access.
>> 
>> There are a lot of folks experimenting with asterisk side of the set-up. Many of us that have been using asterisk for many years know that we can port just about any kind of streaming audio or other services to asterisk and thereby app_rpt. Hard to tell what interfaces/ports are open on them and to where they go. 
>> Because some folks don't think about the implications of their actions, things happen. We all know that even from the radio side of the equation. 
>> 
>> Problems can also occur if a unauthorized station/system is connected to others who are connected to you and there is no way to track that on the echolink side.
>> 
>> They are asking that when "you" have a open port like that (unverified VoIP), to disable the echolink port while it is active so a unverified user does not get access to echolink through VoIP, not RoIP or Radio. And I'm sure we feel the same way about that through allstar.
>> 
>> By the way some of you guys are interpreting this, the iPhone and Android apps and/or repeater to repeater echolink connects and PC to PC echolink connects would not be legal to them.
>> 
>> Has anyone ever asked them to clarify the statement? Please tell us/me "exactly" what they said !
>> 
>> If nobody answers that, perhaps one of us needs to ask them so we can set the record straight as most of us use it on our systems and left unanswered definitively, this will come up many more times.
>> 
>> And perhaps a text of a definitive rule could be included as a default comment in the echolink.conf so there is no ignorance of what they expect if you use it.
>> 
>> Bob (kk6ecm), you win the prize since you asked the question from the email you received.
>> 
>> Would you Send them a message/reply to clarify the type of connections "by example" they do not want and ask they not use the text from the email that you do not understand ? or what type of VoIP connections they are speaking of exactly.
>> 
>> Sure would put a end to the silliness of it time and time again.
>> 
>> I think what leads folks to get one of those emails is basically a list report of connected systems when a breach has been noticed. Problem is, they have a security problem with some of the proxies on their system. I have seen many a connect through a echo-proxy without an ID (callsign) and more. I don't think anyone could ever know it's true source. Hence the poorly worded generic email notice to all connected systems and obviously, they are not familiar with the other systems to word it correctly.
>> 
>> Sorry to be long winded, but I don't want to this get elevated again without good reason.
>> 
>> ...mike/kb8jnm
>> 
>> -------- Original Message --------
>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
>> information on permit=*-*
>> From: Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>>
>> Date: Wed, November 12, 2014 1:13 am
>> To: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
>> 
>> Mike,
>> 
>>  I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...
>> 
>> They say....
>> 
>> "If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected."
>> 
>> They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.
>> 
>> Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.
>> 
>> My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.
>> 
>> 73 Doug
>> WA3DSP
>> http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>
>> 
>> 
>> From: mike at midnighteng.com <mailto:mike at midnighteng.com>
>> To: App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> Date: Tue, 11 Nov 2014 21:15:26 -0700
>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*
>> 
>> 
>> Like many times before you, you don't seem to understand their statement.
>> So nobody needs to go off on a tangent again.
>> 
>> You only need to be concerned if you do something like
>> "have a web portal to your system that has no limitation to who uses it" (as in non-hams).
>> 
>> If you do then they have the possibility to use the echolink system through your system and that is what they do not want.
>> 
>> Neither do we with allstar or via radio.
>> I'm sure there are a few bad actors out there somewhere allowing access.
>> just make sure it is not you.
>> 
>> They could use better wording to keep the confusion/fuss down.
>> 
>> As far as permit or deny...
>> permit= a list that only allows calls you place in the list to connect.
>> deny= a list of calls that can not connect.
>> See the drupal site for info.
>> 
>> ...mike/kb8jnm
>> -------- Original Message --------
>> Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
>> information on permit=*-*
>> From: "Bob" <kk6ecm at gmail.com <mailto:kk6ecm at gmail.com>>
>> Date: Tue, November 11, 2014 10:13 pm
>> To: <App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>>
>> 
>> OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.
>>  
>> Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.
>>  
>> How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?
>>  
>> I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.
>>  
>> I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org <http://allstarlink.org/> uses to validate the users license. 
>>  
>> Thanks,
>> Bob
>> kk6ecm
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/bcccdcb5/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 17:20:22 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 09:20:22 -0800
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
 ore_information_on_permit=*-*
In-Reply-To: <E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
Message-ID: <1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>

Another app_rpt poster just suggested the same thing. I?m trying that out now and it seems to work well. Just have to remember to hit the mute button right away after connecting if you don?t want to transmit immediately.
--
Tim
:wq

> On Nov 12, 2014, at 8:04 AM, Stephen Curtis <steve at m0hoy.com> wrote:
> 
> Hi Tim,
> 
> I too am using Zoiper, I found it easier and more stable to change it to Vox and essentially use the mute button in Zoiper as a PTT. 
> 
> Steve M0HOY
> 
> Sent from my iPhone
> 
> On 12 Nov 2014, at 14:51, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
> 
>> I removed EchoLink. In it?s place we need some smart mobile developer to write a iPhone/Android IAX client with PTT. Anyone????
>> 
>> For now we?re using Zoiper. It?s a bit clunky as you have to do *99 to make PTT and # to unkey. The lack of PTT indication is disconcerting and problematic but it works. The audio is 3,000 times better than EchoLink. And you have control of who connects. Here?s how you set up the node.
>> 
>> In iax.conf add this stanza. Change UserID and UserPassword.
>> 
>> [UserID]
>> username=UserID
>> type=friend
>> context=hams
>> host=dynamic
>> auth=md5
>> secret=UserPassword
>> disallow=all
>> allow=ulaw
>> allow=g726aal2
>> allow=gsm
>> codecpriority=host
>> transfer=no
>> 
>> In extensions.conf add this stanza. This requires a caller ID or it will not connect. I have my users put their call sign in the caller ID. That way the status pages (including Allmon) shows who is connected with a -P appended.
>> 
>> [hams]
>> exten => _X!,1,Ringing
>> exten => _X!,n,NoOp(${CALLERID(name)})
>> exten => _X!,n,NoOp(${CALLERID(number)})
>> exten => _X!,n,Set(CALLSIGN=${CALLERID(name)})
>> exten => _X!,n,GotoIf($[${LEN(${CALLSIGN})} = 0]?hangit)
>> exten => _X!,n,Wait(3)
>> exten => _X!,n,Answer
>> exten => _X!,n,Playback(connecting)
>> exten => _X!,n,rpt(${EXTEN}|P|${CALLSIGN}-P)
>> exten => _X!,n(hangit),Answer
>> exten => _X!,n(hangit),Playback(connection-failed)
>> exten => _X!,n(hangit),Wait(1)
>> exten => _X!,n(hangit),Hangup
>> 
>> --
>> Tim WD6AWP
>> 
>>> On Nov 12, 2014, at 5:46 AM, Bryan D. Boyle <bdboyle at bdboyle.com <mailto:bdboyle at bdboyle.com>> wrote:
>>> 
>>> simple solution, considering the clueless majority of users in the Echolink world, the lousy audio codecs, and the ancient technology that has not kept pace with either praxis or software advances: turn the damn thing off.  
>>> 
>>> You won't miss the drive-bys, distorted computer audio, fumble-fingered operators, and bandwidth usage.
>>> 
>>> It's just so not worth the effort to maintain, worry about the software and technology use conditions, or anything else surrounding it.  It's just amateur radio, not the launch codes.
>>> 
>>> </grump>
>>> 
>>> --
>>> Bryan
>>> Sent from my iPhone 5...No electrons were harmed in the sending of this message.
>>> 
>>> 
>>> 
>>> On Nov 12, 2014, at 06:36, <mike at midnighteng.com <mailto:mike at midnighteng.com>> <mike at midnighteng.com <mailto:mike at midnighteng.com>> wrote:
>>> 
>>>> 
>>>> Additional info (as if the first was not enough)...
>>>> 
>>>> I went to their (echolink) website looking for a rule...
>>>> 
>>>> Here it is...
>>>> 
>>>> Item #4
>>>> Stations operating in Sysop mode may interconnect EchoLink only with equipment operating on Amateur frequencies.  EchoLink does not permit use of the system with other services such as GMRS, FRS, or MARS.  For security reasons, it is also not permitted to interconnect EchoLink with other VoIP systems that support direct access from a computer.
>>>> 
>>>> 
>>>> found on their access policy page at...
>>>> 
>>>> echolink.org/access_policies.htm <http://echolink.org/access_policies.htm>
>>>> 
>>>> There is no mention of other systems interconnect, just the VoIP via computer direct.
>>>> I take the meaning of direct to mean "unverified" or unrestricted.
>>>> This is consistent with the way I have been reading the poorly written emails some of you get from echolink.
>>>> 
>>>> 
>>>> ...mike/kb8jnm
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -------- Original Message --------
>>>> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
>>>> ore_information_on_permit=*-*
>>>> From: <mike at midnighteng.com <mailto:mike at midnighteng.com>>
>>>> Date: Wed, November 12, 2014 5:28 am
>>>> To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>, "Bob" <kk6ecm at gmail.com <mailto:kk6ecm at gmail.com>>
>>>> 
>>>> 
>>>> Bob, Doug and all,
>>>> 
>>>> I fully understand why you would think that. It is so poorly written.
>>>> And as I have watched this conversation get out of hand at least 2 times as you have Doug.
>>>> 
>>>> This is the first time I thought I would clarify how I was reading their email statement before anyone gets elevated on it again.
>>>> 
>>>> other VoIP connections not Radio Sourced RoIP connections and only if you can't verify the VoIP.
>>>> 
>>>> They are saying VOIP connections from non-radio sources...ie phone and web portal without a security check. I have many non-experimental phone and web ports but nobody knows what it is so it is not a open port. I don't provide links to it from a web page or post a phone number and it "does" have multilevel security checks. Even if folks stumbled on it by accident or not, they would not have open access.
>>>> 
>>>> There are a lot of folks experimenting with asterisk side of the set-up. Many of us that have been using asterisk for many years know that we can port just about any kind of streaming audio or other services to asterisk and thereby app_rpt. Hard to tell what interfaces/ports are open on them and to where they go. 
>>>> Because some folks don't think about the implications of their actions, things happen. We all know that even from the radio side of the equation. 
>>>> 
>>>> Problems can also occur if a unauthorized station/system is connected to others who are connected to you and there is no way to track that on the echolink side.
>>>> 
>>>> They are asking that when "you" have a open port like that (unverified VoIP), to disable the echolink port while it is active so a unverified user does not get access to echolink through VoIP, not RoIP or Radio. And I'm sure we feel the same way about that through allstar.
>>>> 
>>>> By the way some of you guys are interpreting this, the iPhone and Android apps and/or repeater to repeater echolink connects and PC to PC echolink connects would not be legal to them.
>>>> 
>>>> Has anyone ever asked them to clarify the statement? Please tell us/me "exactly" what they said !
>>>> 
>>>> If nobody answers that, perhaps one of us needs to ask them so we can set the record straight as most of us use it on our systems and left unanswered definitively, this will come up many more times.
>>>> 
>>>> And perhaps a text of a definitive rule could be included as a default comment in the echolink.conf so there is no ignorance of what they expect if you use it.
>>>> 
>>>> Bob (kk6ecm), you win the prize since you asked the question from the email you received.
>>>> 
>>>> Would you Send them a message/reply to clarify the type of connections "by example" they do not want and ask they not use the text from the email that you do not understand ? or what type of VoIP connections they are speaking of exactly.
>>>> 
>>>> Sure would put a end to the silliness of it time and time again.
>>>> 
>>>> I think what leads folks to get one of those emails is basically a list report of connected systems when a breach has been noticed. Problem is, they have a security problem with some of the proxies on their system. I have seen many a connect through a echo-proxy without an ID (callsign) and more. I don't think anyone could ever know it's true source. Hence the poorly worded generic email notice to all connected systems and obviously, they are not familiar with the other systems to word it correctly.
>>>> 
>>>> Sorry to be long winded, but I don't want to this get elevated again without good reason.
>>>> 
>>>> ...mike/kb8jnm
>>>> 
>>>> -------- Original Message --------
>>>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
>>>> information on permit=*-*
>>>> From: Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>>
>>>> Date: Wed, November 12, 2014 1:13 am
>>>> To: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
>>>> 
>>>> Mike,
>>>> 
>>>>  I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...
>>>> 
>>>> They say....
>>>> 
>>>> "If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected."
>>>> 
>>>> They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.
>>>> 
>>>> Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.
>>>> 
>>>> My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.
>>>> 
>>>> 73 Doug
>>>> WA3DSP
>>>> http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>
>>>> 
>>>> 
>>>> From: mike at midnighteng.com <mailto:mike at midnighteng.com>
>>>> To: App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> Date: Tue, 11 Nov 2014 21:15:26 -0700
>>>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*
>>>> 
>>>> 
>>>> Like many times before you, you don't seem to understand their statement.
>>>> So nobody needs to go off on a tangent again.
>>>> 
>>>> You only need to be concerned if you do something like
>>>> "have a web portal to your system that has no limitation to who uses it" (as in non-hams).
>>>> 
>>>> If you do then they have the possibility to use the echolink system through your system and that is what they do not want.
>>>> 
>>>> Neither do we with allstar or via radio.
>>>> I'm sure there are a few bad actors out there somewhere allowing access.
>>>> just make sure it is not you.
>>>> 
>>>> They could use better wording to keep the confusion/fuss down.
>>>> 
>>>> As far as permit or deny...
>>>> permit= a list that only allows calls you place in the list to connect.
>>>> deny= a list of calls that can not connect.
>>>> See the drupal site for info.
>>>> 
>>>> ...mike/kb8jnm
>>>> -------- Original Message --------
>>>> Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
>>>> information on permit=*-*
>>>> From: "Bob" <kk6ecm at gmail.com <mailto:kk6ecm at gmail.com>>
>>>> Date: Tue, November 11, 2014 10:13 pm
>>>> To: <App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>>
>>>> 
>>>> OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.
>>>>  
>>>> Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.
>>>>  
>>>> How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?
>>>>  
>>>> I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.
>>>>  
>>>> I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org <http://allstarlink.org/> uses to validate the users license. 
>>>>  
>>>> Thanks,
>>>> Bob
>>>> kk6ecm
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>>> 
>>>> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/65148f6b/attachment.html>

From bbrown at byrg.net  Wed Nov 12 17:37:26 2014
From: bbrown at byrg.net (=?UTF-8?B?Qm9iIEJyb3duIC0gV8OYTlFY?=)
Date: Wed, 12 Nov 2014 11:37:26 -0600
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
	<1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>
Message-ID: <CA+WM89YCYcCVtqPR1JgLRGf8Lyd+o4+9ekJFpun2=0XsUjUzzA@mail.gmail.com>

We change the (*99) to * only for TX  and use the( #) to RX.

* to TX
# to RX

Hang up to disconnect.

Work good last long time,

--
Thanks in Advance

   Bob Brown, W?NQX

   Kansas City Metro Area

   http://drsm0ke.net

   http://byrg.net

   http://sm0kenet.net

   http://kcdstar.byrg.net

Quis custodiet ipsos custodes?




--

On Wed, Nov 12, 2014 at 11:20 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> Another app_rpt poster just suggested the same thing. I?m trying that out
> now and it seems to work well. Just have to remember to hit the mute button
> right away after connecting if you don?t want to transmit immediately.
> --
> Tim
> :wq
>
> On Nov 12, 2014, at 8:04 AM, Stephen Curtis <steve at m0hoy.com> wrote:
>
> Hi Tim,
>
> I too am using Zoiper, I found it easier and more stable to change it to
> Vox and essentially use the mute button in Zoiper as a PTT.
>
> Steve M0HOY
>
> Sent from my iPhone
>
> On 12 Nov 2014, at 14:51, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
> I removed EchoLink. In it?s place we need some smart mobile developer to
> write a iPhone/Android IAX client with PTT. Anyone????
>
> For now we?re using Zoiper. It?s a bit clunky as you have to do *99 to
> make PTT and # to unkey. The lack of PTT indication is disconcerting and
> problematic but it works. The audio is 3,000 times better than EchoLink.
> And you have control of who connects. Here?s how you set up the node.
>
> In iax.conf add this stanza. Change UserID and UserPassword.
>
> [UserID]
> username=UserID
> type=friend
> context=hams
> host=dynamic
> auth=md5
> secret=UserPassword
> disallow=all
> allow=ulaw
> allow=g726aal2
> allow=gsm
> codecpriority=host
> transfer=no
>
> In extensions.conf add this stanza. This requires a caller ID or it will
> not connect. I have my users put their call sign in the caller ID. That way
> the status pages (including Allmon) shows who is connected with a -P
> appended.
>
> [hams]
> exten => _X!,1,Ringing
> exten => _X!,n,NoOp(${CALLERID(name)})
> exten => _X!,n,NoOp(${CALLERID(number)})
> exten => _X!,n,Set(CALLSIGN=${CALLERID(name)})
> exten => _X!,n,GotoIf($[${LEN(${CALLSIGN})} = 0]?hangit)
> exten => _X!,n,Wait(3)
> exten => _X!,n,Answer
> exten => _X!,n,Playback(connecting)
> exten => _X!,n,rpt(${EXTEN}|P|${CALLSIGN}-P)
> exten => _X!,n(hangit),Answer
> exten => _X!,n(hangit),Playback(connection-failed)
> exten => _X!,n(hangit),Wait(1)
> exten => _X!,n(hangit),Hangup
>
> --
> Tim WD6AWP
>
> On Nov 12, 2014, at 5:46 AM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
>
> simple solution, considering the clueless majority of users in the
> Echolink world, the lousy audio codecs, and the ancient technology that has
> not kept pace with either praxis or software advances: turn the damn thing
> off.
>
> You won't miss the drive-bys, distorted computer audio, fumble-fingered
> operators, and bandwidth usage.
>
> It's just so not worth the effort to maintain, worry about the software
> and technology use conditions, or anything else surrounding it.  It's just
> amateur radio, not the launch codes.
>
> </grump>
>
> --
> Bryan
> Sent from my iPhone 5...No electrons were harmed in the sending of this
> message.
>
>
>
> On Nov 12, 2014, at 06:36, <mike at midnighteng.com> <mike at midnighteng.com>
> wrote:
>
>
> Additional info (as if the first was not enough)...
>
> I went to their (echolink) website looking for a rule...
>
> Here it is...
>
> Item #4
> Stations operating in Sysop mode may interconnect EchoLink only with
> equipment operating on Amateur frequencies.  EchoLink does not permit use
> of the system with other services such as GMRS, FRS, or MARS.  For security
> reasons, it is also not permitted to interconnect EchoLink with other VoIP
> systems that support direct access from a computer.
>
>
> found on their access policy page at...
>
> echolink.org/access_policies.htm
>
> There is no mention of other systems interconnect, just the VoIP via
> computer direct.
> I take the meaning of direct to mean "unverified" or unrestricted.
> This is consistent with the way I have been reading the poorly written
> emails some of you get from echolink.
>
>
> ...mike/kb8jnm
>
>
>
>
> -------- Original Message --------
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> From: <mike at midnighteng.com>
> Date: Wed, November 12, 2014 5:28 am
> To: app_rpt-users at ohnosec.org, "Bob" <kk6ecm at gmail.com>
>
>
> Bob, Doug and all,
>
> I fully understand why you would think that. It is so poorly written.
> And as I have watched this conversation get out of hand at least 2 times
> as you have Doug.
>
> This is the first time I thought I would clarify how I was reading their
> email statement before anyone gets elevated on it again.
>
> other VoIP connections not Radio Sourced RoIP connections and only if you
> can't verify the VoIP.
>
> They are saying VOIP connections from non-radio sources...ie phone and web
> portal without a security check. I have many non-experimental phone and web
> ports but nobody knows what it is so it is not a open port. I don't provide
> links to it from a web page or post a phone number and it "does" have
> multilevel security checks. Even if folks stumbled on it by accident or
> not, they would not have open access.
>
> There are a lot of folks experimenting with asterisk side of the set-up.
> Many of us that have been using asterisk for many years know that we can
> port just about any kind of streaming audio or other services to asterisk
> and thereby app_rpt. Hard to tell what interfaces/ports are open on them
> and to where they go.
> Because some folks don't think about the implications of their actions,
> things happen. We all know that even from the radio side of the equation.
>
> Problems can also occur if a unauthorized station/system is connected to
> others who are connected to you and there is no way to track that on the
> echolink side.
>
> They are asking that when "you" have a open port like that (unverified
> VoIP), to disable the echolink port while it is active so a unverified user
> does not get access to echolink through VoIP, not RoIP or Radio. And I'm
> sure we feel the same way about that through allstar.
>
> By the way some of you guys are interpreting this, the iPhone and Android
> apps and/or repeater to repeater echolink connects and PC to PC echolink
> connects would not be legal to them.
>
> Has anyone ever asked them to clarify the statement? Please tell us/me
> "exactly" what they said !
>
> If nobody answers that, perhaps one of us needs to ask them so we can set
> the record straight as most of us use it on our systems and left unanswered
> definitively, this will come up many more times.
>
> And perhaps a text of a definitive rule could be included as a default
> comment in the echolink.conf so there is no ignorance of what they expect
> if you use it.
>
> Bob (kk6ecm), you win the prize since you asked the question from the
> email you received.
>
> Would you Send them a message/reply to clarify the type of connections "by
> example" they do not want and ask they not use the text from the email that
> you do not understand ? or what type of VoIP connections they are speaking
> of exactly.
>
> Sure would put a end to the silliness of it time and time again.
>
> I think what leads folks to get one of those emails is basically a list
> report of connected systems when a breach has been noticed. Problem is,
> they have a security problem with some of the proxies on their system. I
> have seen many a connect through a echo-proxy without an ID (callsign) and
> more. I don't think anyone could ever know it's true source. Hence the
> poorly worded generic email notice to all connected systems and obviously,
> they are not familiar with the other systems to word it correctly.
>
> Sorry to be long winded, but I don't want to this get elevated again
> without good reason.
>
> ...mike/kb8jnm
>
> -------- Original Message --------
> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
> information on permit=*-*
> From: Doug Crompton <doug at crompton.com>
> Date: Wed, November 12, 2014 1:13 am
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>
> Mike,
>
>  I am going to break my own rule and respond here! I don't think you are
> interpreting there statement correctly...
>
> They say....
>
> "If you are running Asterisk with app_rpt and an EchoLink channel, be sure
> it is configured not to allow other VoIP connections when an EchoLink
> station is connected."
>
> They go on to specifically prohibit connections to Allstar, Wires, and
> many others is not to be connected to Echolink. Bottom line is they think
> their validation process is better than ours or others. I say we police it
> just fine. A non ham popping up would stick out like a sore thumb.
>
> Bottom line they don't want us connected. In other words they want it like
> IRLP with echolink. You can either connect to a echolink station or an IRLP
> node, NOT both at the same time.
>
> My assertion still stands, ignore it but on the other hand like any good
> ham make sure you police the activity on your nodes. There is no way to
> practically isolate echolink from Allstar unless you somehow disconnect all
> allstar nodes when an echolink call comes in and this would be crazy to do.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: mike at midnighteng.com
> To: App_rpt-users at ohnosec.org
> Date: Tue, 11 Nov 2014 21:15:26 -0700
> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
> information on permit=*-*
>
>
> Like many times before you, you don't seem to understand their statement.
> So nobody needs to go off on a tangent again.
>
> You only need to be concerned if you do something like
> "have a web portal to your system that has no limitation to who uses it"
> (as in non-hams).
>
> If you do then they have the possibility to use the echolink system
> through your system and that is what they do not want.
>
> Neither do we with allstar or via radio.
> I'm sure there are a few bad actors out there somewhere allowing access.
> just make sure it is not you.
>
> They could use better wording to keep the confusion/fuss down.
>
> As far as permit or deny...
> permit= a list that only allows calls you place in the list to connect.
> deny= a list of calls that can not connect.
> See the drupal site for info.
>
> ...mike/kb8jnm
>
> -------- Original Message --------
> Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
> information on permit=*-*
> From: "Bob" <kk6ecm at gmail.com>
> Date: Tue, November 11, 2014 10:13 pm
> To: <App_rpt-users at ohnosec.org>
>
> OK... Echolink quality aside, I?m looking for some clarification how
> app_rpt works with Echolink.
>
> Attempting to understand the statement from Echolink, ?If you are running
> Asterisk with app_rpt and an EchoLink channel, be sure it is configured not
> to allow other VoIP connections when an EchoLink station is connected. If
> this isn't practical, please disable the EchoLink channel.? It seems that
> ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.
>
> How does permit=*-* (?prohibit computer-based connections?) work with an
> incoming Echolink computer based node, or with an app_rpt hosted Echolink
> node in an Echolink to Echolink configuration. When the user enters *33 to
> connect, is it actually Echolink nodes connecting, or is there a difference?
>
> I think I get their point they don?t want an Allstar node with Echolink
> node, to simultaneously connect to another Allstar node that does not
> support Echolink, but not sure why... still licensed amateurs involved.
>
> I am dismayed with Echolink?s assertion that the use of a copy of a paper
> license is more official than the FCC recognized ULS site, which it appears
>  Allstarlink.org <http://allstarlink.org/> uses to validate the users
> license.
>
> Thanks,
> Bob
> kk6ecm
>
> ------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________ App_rpt-users mailing list
>  App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
> ------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> ------------------------------
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/011f89a8/attachment.html>

From N1XBM at amsat.org  Wed Nov 12 19:14:52 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Wed, 12 Nov 2014 14:14:52 -0500
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <CA+WM89YCYcCVtqPR1JgLRGf8Lyd+o4+9ekJFpun2=0XsUjUzzA@mail.gmail.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
	<1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>
	<CA+WM89YCYcCVtqPR1JgLRGf8Lyd+o4+9ekJFpun2=0XsUjUzzA@mail.gmail.com>
Message-ID: <CAM09xEYnUwSUXSjw92zi-CZw9vvBTGkySFhkj2-+KJvoYEvTgg@mail.gmail.com>

I think this has come up before,  but if you have a spare PC you can create
a account on your box for zoiper set it for vox. Then get zello for PC and
create a account for you node. Then create a channel for your node. Place
the account into the repeater channel.  Use virtual audio cables and point
zello to zoiper and cross the cables. Works slicker than sh*t! Obviously
your zoiper connection is left up full time. Also I password protect my
channel.

Feel free to connect to my node and I'll give you a demo.

We have a regular user who is over the road trucker and zello plays nice
with his blue parrot headset also much more "PTT radio like" friendly.
Also I can record repeater activity too!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/a7c96c35/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 20:09:51 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 12:09:51 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
Message-ID: <B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>

Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
--
Tim
:wq

> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net> wrote:
> 
> So where is allmon v2 being hosted?
> 
> Thanks & 73,
> Scott KB2EAR
> 
> On 2014-11-12 09:25, Tim Sawyer wrote:

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/4819121f/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 22:15:44 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 14:15:44 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
Message-ID: <0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>

I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
--
Tim
:wq

> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net> wrote:
> 
> Tim
> Will this work with xipar nodes?
> 
> Lu Vencl
> 
> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
> 
>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>> --
>> Tim
>> :wq
>> 
>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>> 
>>> So where is allmon v2 being hosted?
>>> 
>>> Thanks & 73,
>>> Scott KB2EAR
>>> 
>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/9373da2b/attachment.html>

From steve at m0hoy.com  Wed Nov 12 23:16:14 2014
From: steve at m0hoy.com (Stephen Curtis)
Date: Wed, 12 Nov 2014 23:16:14 +0000
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
Message-ID: <99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>

I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!

Thanks
Steve 
M0HOY




> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com> wrote:
> 
> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
> --
> Tim
> :wq
> 
>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>> 
>> Tim
>> Will this work with xipar nodes?
>> 
>> Lu Vencl
>> 
>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>> 
>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>> --
>>> Tim
>>> :wq
>>> 
>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>> 
>>>> So where is allmon v2 being hosted?
>>>> 
>>>> Thanks & 73,
>>>> Scott KB2EAR
>>>> 
>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/9a114aad/attachment.html>

From tim.sawyer at mac.com  Wed Nov 12 23:19:52 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Wed, 12 Nov 2014 15:19:52 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
Message-ID: <52F40EDF-4092-4A81-9AAE-5B75A19E741A@mac.com>

Boy do I have a bad memory. I remember now and you?re right. It won?t work with Xipar. Jim added code to app_rpt for Allmon. 
--
Tim
:wq

> On Nov 12, 2014, at 3:16 PM, Stephen Curtis <steve at m0hoy.com> wrote:
> 
> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
> 
> Thanks
> Steve 
> M0HOY
> 
> 
> 
> 
>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>> 
>> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>> --
>> Tim
>> :wq
>> 
>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>>> 
>>> Tim
>>> Will this work with xipar nodes?
>>> 
>>> Lu Vencl
>>> 
>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>> 
>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>>> --
>>>> Tim
>>>> :wq
>>>> 
>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>>> 
>>>>> So where is allmon v2 being hosted?
>>>>> 
>>>>> Thanks & 73,
>>>>> Scott KB2EAR
>>>>> 
>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/667e7e50/attachment.html>

From n3fe at repeater.net  Wed Nov 12 23:35:50 2014
From: n3fe at repeater.net (Corey Dean)
Date: Wed, 12 Nov 2014 18:35:50 -0500
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
Message-ID: <C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>

I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...

Corey N3FE

> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com> wrote:
> 
> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
> 
> Thanks
> Steve 
> M0HOY
> 
> 
> 
> 
>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com> wrote:
>> 
>> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>> --
>> Tim
>> :wq
>> 
>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net> wrote:
>>> 
>>> Tim
>>> Will this work with xipar nodes?
>>> 
>>> Lu Vencl
>>> 
>>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>>> 
>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
>>>> --
>>>> Tim
>>>> :wq
>>>> 
>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net> wrote:
>>>>> 
>>>>> So where is allmon v2 being hosted?
>>>>> 
>>>>> Thanks & 73,
>>>>> Scott KB2EAR
>>>>> 
>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/b7366202/attachment.html>

From george at dyb.com  Thu Nov 13 01:46:00 2014
From: george at dyb.com (George Csahanin)
Date: Wed, 12 Nov 2014 19:46:00 -0600
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net><6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
Message-ID: <2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>

Hey guys, I?m not a programmer, and I didn?t stay at a HI Express last night, so I have to  ask: are the volume buttons on smart phones hard wired to that function? Or can one be made to be a PTT function? Just set volume at max smoke, or make the other button step/cycle thru 8 preset volume levels? I really envy you guys who can write this stuff. Most I ever did was a HF remote controller using 6502 assembler. 

GeorgeC

George J Csahanin
W2DB
Cedar Park, TX
512-401-2630 home
401-338-0568 cel

From: Tim Sawyer 
Sent: Wednesday, November 12, 2014 8:51 AM
To: Bryan D. Boyle 
Cc: app_rpt mailing list 
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-*

I removed EchoLink. In it?s place we need some smart mobile developer to write a iPhone/Android IAX client with PTT. Anyone???? 

For now we?re using Zoiper. It?s a bit clunky as you have to do *99 to make PTT and # to unkey. The lack of PTT indication is disconcerting and problematic but it works. The audio is 3,000 times better than EchoLink. And you have control of who connects. Here?s how you set up the node. 

In iax.conf add this stanza. Change UserID and UserPassword.

[UserID]
username=UserID
type=friend
context=hams
host=dynamic
auth=md5
secret=UserPassword
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no

In extensions.conf add this stanza. This requires a caller ID or it will not connect. I have my users put their call sign in the caller ID. That way the status pages (including Allmon) shows who is connected with a -P appended.

[hams]
exten => _X!,1,Ringing
exten => _X!,n,NoOp(${CALLERID(name)})
exten => _X!,n,NoOp(${CALLERID(number)})
exten => _X!,n,Set(CALLSIGN=${CALLERID(name)})
exten => _X!,n,GotoIf($[${LEN(${CALLSIGN})} = 0]?hangit)
exten => _X!,n,Wait(3)
exten => _X!,n,Answer
exten => _X!,n,Playback(connecting)
exten => _X!,n,rpt(${EXTEN}|P|${CALLSIGN}-P)
exten => _X!,n(hangit),Answer
exten => _X!,n(hangit),Playback(connection-failed)
exten => _X!,n(hangit),Wait(1)
exten => _X!,n(hangit),Hangup

--
Tim WD6AWP

  On Nov 12, 2014, at 5:46 AM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:

  simple solution, considering the clueless majority of users in the Echolink world, the lousy audio codecs, and the ancient technology that has not kept pace with either praxis or software advances: turn the damn thing off.  

  You won't miss the drive-bys, distorted computer audio, fumble-fingered operators, and bandwidth usage.

  It's just so not worth the effort to maintain, worry about the software and technology use conditions, or anything else surrounding it.  It's just amateur radio, not the launch codes.

  </grump>

  -- 
  Bryan
  Sent from my iPhone 5...No electrons were harmed in the sending of this message.



  On Nov 12, 2014, at 06:36, <mike at midnighteng.com> <mike at midnighteng.com> wrote:



    Additional info (as if the first was not enough)...

    I went to their (echolink) website looking for a rule...

    Here it is...


    Item #4

    Stations operating in Sysop mode may interconnect EchoLink only with equipment operating on Amateur frequencies.  EchoLink does not permit use of the system with other services such as GMRS, FRS, or MARS.  For security reasons, it is also not permitted to interconnect EchoLink with other VoIP systems that support direct access from a computer.




    found on their access policy page at...



    echolink.org/access_policies.htm


    There is no mention of other systems interconnect, just the VoIP via computer direct.
    I take the meaning of direct to mean "unverified" or unrestricted.
    This is consistent with the way I have been reading the poorly written emails some of you get from echolink.




    ...mike/kb8jnm





      -------- Original Message --------
      Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-*
      From: <mike at midnighteng.com>
      Date: Wed, November 12, 2014 5:28 am
      To: app_rpt-users at ohnosec.org, "Bob" <kk6ecm at gmail.com>



      Bob, Doug and all,

      I fully understand why you would think that. It is so poorly written.
      And as I have watched this conversation get out of hand at least 2 times as you have Doug.

      This is the first time I thought I would clarify how I was reading their email statement before anyone gets elevated on it again.

      other VoIP connections not Radio Sourced RoIP connections and only if you can't verify the VoIP.

      They are saying VOIP connections from non-radio sources...ie phone and web portal without a security check. I have many non-experimental phone and web ports but nobody knows what it is so it is not a open port. I don't provide links to it from a web page or post a phone number and it "does" have multilevel security checks. Even if folks stumbled on it by accident or not, they would not have open access.

      There are a lot of folks experimenting with asterisk side of the set-up. Many of us that have been using asterisk for many years know that we can port just about any kind of streaming audio or other services to asterisk and thereby app_rpt. Hard to tell what interfaces/ports are open on them and to where they go. 
      Because some folks don't think about the implications of their actions, things happen. We all know that even from the radio side of the equation. 

      Problems can also occur if a unauthorized station/system is connected to others who are connected to you and there is no way to track that on the echolink side.

      They are asking that when "you" have a open port like that (unverified VoIP), to disable the echolink port while it is active so a unverified user does not get access to echolink through VoIP, not RoIP or Radio. And I'm sure we feel the same way about that through allstar.


      By the way some of you guys are interpreting this, the iPhone and Android apps and/or repeater to repeater echolink connects and PC to PC echolink connects would not be legal to them.

      Has anyone ever asked them to clarify the statement? Please tell us/me "exactly" what they said !

      If nobody answers that, perhaps one of us needs to ask them so we can set the record straight as most of us use it on our systems and left unanswered definitively, this will come up many more times.

      And perhaps a text of a definitive rule could be included as a default comment in the echolink.conf so there is no ignorance of what they expect if you use it.


      Bob (kk6ecm), you win the prize since you asked the question from the email you received.

      Would you Send them a message/reply to clarify the type of connections "by example" they do not want and ask they not use the text from the email that you do not understand ? or what type of VoIP connections they are speaking of exactly.


      Sure would put a end to the silliness of it time and time again.

      I think what leads folks to get one of those emails is basically a list report of connected systems when a breach has been noticed. Problem is, they have a security problem with some of the proxies on their system. I have seen many a connect through a echo-proxy without an ID (callsign) and more. I don't think anyone could ever know it's true source. Hence the poorly worded generic email notice to all connected systems and obviously, they are not familiar with the other systems to word it correctly.

      Sorry to be long winded, but I don't want to this get elevated again without good reason.


      ...mike/kb8jnm

        -------- Original Message --------
        Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
        information on permit=*-*
        From: Doug Crompton <doug at crompton.com>
        Date: Wed, November 12, 2014 1:13 am
        To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>


        Mike,

        I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...

        They say....

        "If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected."

        They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.

        Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.

        My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.

        73 Doug
        WA3DSP
        http://www.crompton.com/hamradio




------------------------------------------------------------------------
        From: mike at midnighteng.com
        To: App_rpt-users at ohnosec.org
        Date: Tue, 11 Nov 2014 21:15:26 -0700
        Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*



        Like many times before you, you don't seem to understand their statement.
        So nobody needs to go off on a tangent again.

        You only need to be concerned if you do something like
        "have a web portal to your system that has no limitation to who uses it" (as in non-hams).


        If you do then they have the possibility to use the echolink system through your system and that is what they do not want.

        Neither do we with allstar or via radio.
        I'm sure there are a few bad actors out there somewhere allowing access.
        just make sure it is not you.


        They could use better wording to keep the confusion/fuss down.

        As far as permit or deny...
        permit= a list that only allows calls you place in the list to connect.
        deny= a list of calls that can not connect.
        See the drupal site for info.


        ...mike/kb8jnm

          -------- Original Message --------
          Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
          information on permit=*-*
          From: "Bob" <kk6ecm at gmail.com>
          Date: Tue, November 11, 2014 10:13 pm
          To: <App_rpt-users at ohnosec.org>


            OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.

            Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.

            How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?

            I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.

            I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org uses to validate the users license. 

            Thanks,
            Bob
            kk6ecm

----------------------------------------------------------------------
          _______________________________________________
          App_rpt-users mailing list
          App_rpt-users at ohnosec.org
          http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

          To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
          You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

        _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

------------------------------------------------------------------------
        _______________________________________________
        App_rpt-users mailing list
        App_rpt-users at ohnosec.org
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

        To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
        You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

--------------------------------------------------------------------------
      _______________________________________________
      App_rpt-users mailing list
      App_rpt-users at ohnosec.org
      http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

      To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
      You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
    _______________________________________________
    App_rpt-users mailing list
    App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

    To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
    You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/9900e02b/attachment.html>

From electricity440 at gmail.com  Thu Nov 13 01:50:49 2014
From: electricity440 at gmail.com (Skyler Fennell)
Date: Wed, 12 Nov 2014 18:50:49 -0700
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
Message-ID: <2762C2CE-EB84-48A3-B332-8350D357588B@gmail.com>

The iPhone has the use of the volume button as a camera, i don't know of any apple approved apps that would do that but a jailbreak cydia tweak may be something to look into. 

> On Nov 12, 2014, at 6:46 PM, George Csahanin <george at dyb.com> wrote:
> 
> Hey guys, I?m not a programmer, and I didn?t stay at a HI Express last night, so I have to  ask: are the volume buttons on smart phones hard wired to that function? Or can one be made to be a PTT function? Just set volume at max smoke, or make the other button step/cycle thru 8 preset volume levels? I really envy you guys who can write this stuff. Most I ever did was a HF remote controller using 6502 assembler.
>  
> GeorgeC
>  
> George J Csahanin
> W2DB
> Cedar Park, TX
> 512-401-2630 home
> 401-338-0568 cel
>  
> From: Tim Sawyer
> Sent: Wednesday, November 12, 2014 8:51 AM
> To: Bryan D. Boyle
> Cc: app_rpt mailing list
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-*
>  
> I removed EchoLink. In it?s place we need some smart mobile developer to write a iPhone/Android IAX client with PTT. Anyone????
>  
> For now we?re using Zoiper. It?s a bit clunky as you have to do *99 to make PTT and # to unkey. The lack of PTT indication is disconcerting and problematic but it works. The audio is 3,000 times better than EchoLink. And you have control of who connects. Here?s how you set up the node.
>  
> In iax.conf add this stanza. Change UserID and UserPassword.
>  
> [UserID]
> username=UserID
> type=friend
> context=hams
> host=dynamic
> auth=md5
> secret=UserPassword
> disallow=all
> allow=ulaw
> allow=g726aal2
> allow=gsm
> codecpriority=host
> transfer=no
>  
> In extensions.conf add this stanza. This requires a caller ID or it will not connect. I have my users put their call sign in the caller ID. That way the status pages (including Allmon) shows who is connected with a -P appended.
>  
> [hams]
> exten => _X!,1,Ringing
> exten => _X!,n,NoOp(${CALLERID(name)})
> exten => _X!,n,NoOp(${CALLERID(number)})
> exten => _X!,n,Set(CALLSIGN=${CALLERID(name)})
> exten => _X!,n,GotoIf($[${LEN(${CALLSIGN})} = 0]?hangit)
> exten => _X!,n,Wait(3)
> exten => _X!,n,Answer
> exten => _X!,n,Playback(connecting)
> exten => _X!,n,rpt(${EXTEN}|P|${CALLSIGN}-P)
> exten => _X!,n(hangit),Answer
> exten => _X!,n(hangit),Playback(connection-failed)
> exten => _X!,n(hangit),Wait(1)
> exten => _X!,n(hangit),Hangup
>  
> --
> Tim WD6AWP
>  
>> On Nov 12, 2014, at 5:46 AM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
>>  
>> simple solution, considering the clueless majority of users in the Echolink world, the lousy audio codecs, and the ancient technology that has not kept pace with either praxis or software advances: turn the damn thing off. 
>>  
>> You won't miss the drive-bys, distorted computer audio, fumble-fingered operators, and bandwidth usage.
>>  
>> It's just so not worth the effort to maintain, worry about the software and technology use conditions, or anything else surrounding it.  It's just amateur radio, not the launch codes.
>>  
>> </grump>
>> 
>> --
>> Bryan
>> Sent from my iPhone 5...No electrons were harmed in the sending of this message.
>>  
>>  
>> 
>>> On Nov 12, 2014, at 06:36, <mike at midnighteng.com> <mike at midnighteng.com> wrote:
>>> 
>>>  
>>> Additional info (as if the first was not enough)...
>>>  
>>> I went to their (echolink) website looking for a rule...
>>>  
>>> Here it is...
>>> 
>>> Item #4
>>> Stations operating in Sysop mode may interconnect EchoLink      only with equipment operating on Amateur frequencies.  EchoLink does not permit use of the system with other services such as GMRS, FRS, or MARS.  For security reasons, it is also not permitted to interconnect EchoLink with other VoIP systems that support direct access from a computer.
>>> 
>>> 
>>> found on their access policy page at...
>>> 
>>> echolink.org/access_policies.htm
>>> 
>>> There is no mention of other systems interconnect, just the VoIP via computer direct.
>>> I take the meaning of direct to mean "unverified" or unrestricted.
>>> This is consistent with the way I have been reading the poorly written emails some of you get from echolink.
>>> 
>>> 
>>> ...mike/kb8jnm
>>>  
>>>  
>>>  
>>>  
>>> -------- Original Message --------
>>> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
>>> ore_information_on_permit=*-*
>>> From: <mike at midnighteng.com>
>>> Date: Wed, November 12, 2014 5:28 am
>>> To: app_rpt-users at ohnosec.org, "Bob" <kk6ecm at gmail.com>
>>> 
>>>  
>>> Bob, Doug and all,
>>>  
>>> I fully understand why you would think that. It is so poorly written.
>>> And as I have watched this conversation get out of hand at least 2 times as you have Doug.
>>>  
>>> This is the first time I thought I would clarify how I was reading their email statement before anyone gets elevated on it again.
>>>  
>>> other VoIP connections not Radio Sourced RoIP connections and only if you can't verify the VoIP.
>>>  
>>> They are saying VOIP connections from non-radio sources...ie phone and web portal without a security check. I have many non-experimental phone and web ports but nobody knows what it is so it is not a open port. I don't provide links to it from a web page or post a phone number and it "does" have multilevel security checks. Even if folks stumbled on it by accident or not, they would not have open access.
>>>  
>>> There are a lot of folks experimenting with asterisk side of the set-up. Many of us that have been using asterisk for many years know that we can port just about any kind of streaming audio or other services to asterisk and thereby app_rpt. Hard to tell what interfaces/ports are open on them and to where they go. 
>>> Because some folks don't think about the implications of their actions, things happen. We all know that even from the radio side of the equation. 
>>>  
>>> Problems can also occur if a unauthorized station/system is connected to others who are connected to you and there is no way to track that on the echolink side.
>>>  
>>> They are asking that when "you" have a open port like that (unverified VoIP), to disable the echolink port while it is active so a unverified user does not get access to echolink through VoIP, not RoIP or Radio. And I'm sure we feel the same way about that through allstar.
>>>  
>>> By the way some of you guys are interpreting this, the iPhone and Android apps and/or repeater to repeater echolink connects and PC to PC echolink connects would not be legal to them.
>>>  
>>> Has anyone ever asked them to clarify the statement? Please tell us/me "exactly" what they said !
>>>  
>>> If nobody answers that, perhaps one of us needs to ask them so we can set the record straight as most of us use it on our systems and left unanswered definitively, this will come up many more times.
>>>  
>>> And perhaps a text of a definitive rule could be included as a default comment in the echolink.conf so there is no ignorance of what they expect if you use it.
>>>  
>>> Bob (kk6ecm), you win the prize since you asked the question from the email you received.
>>>  
>>> Would you Send them a message/reply to clarify the type of connections "by example" they do not want and ask they not use the text from the email that you do not understand ? or what type of VoIP connections they are speaking of exactly.
>>>  
>>> Sure would put a end to the silliness of it time and time again.
>>>  
>>> I think what leads folks to get one of those emails is basically a list report of connected systems when a breach has been noticed. Problem is, they have a security problem with some of the proxies on their system. I have seen many a connect through a echo-proxy without an ID (callsign) and more. I don't think anyone could ever know it's true source. Hence the poorly worded generic email notice to all connected systems and obviously, they are not familiar with the other systems to word it correctly.
>>>  
>>> Sorry to be long winded, but I don't want to this get elevated again without good reason.
>>>  
>>> ...mike/kb8jnm
>>>  
>>> -------- Original Message --------
>>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more
>>> information on permit=*-*
>>> From: Doug Crompton <doug at crompton.com>
>>> Date: Wed, November 12, 2014 1:13 am
>>> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>> 
>>> Mike,
>>> 
>>> I am going to break my own rule and respond here! I don't think you are interpreting there statement correctly...
>>> 
>>> They say....
>>> 
>>> "If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected."
>>> 
>>> They go on to specifically prohibit connections to Allstar, Wires, and many others is not to be connected to Echolink. Bottom line is they think their validation process is better than ours or others. I say we police it just fine. A non ham popping up would stick out like a sore thumb.
>>> 
>>> Bottom line they don't want us connected. In other words they want it like IRLP with echolink. You can either connect to a echolink station or an IRLP node, NOT both at the same time.
>>> 
>>> My assertion still stands, ignore it but on the other hand like any good ham make sure you police the activity on your nodes. There is no way to practically isolate echolink from Allstar unless you somehow disconnect all allstar nodes when an echolink call comes in and this would be crazy to do.
>>> 
>>> 73 Doug
>>> WA3DSP
>>> http://www.crompton.com/hamradio
>>> 
>>> 
>>> From: mike at midnighteng.com
>>> To: App_rpt-users at ohnosec.org
>>> Date: Tue, 11 Nov 2014 21:15:26 -0700
>>> Subject: Re: [App_rpt-users] Echolink and app_rpt: Looking for more information on permit=*-*
>>> 
>>>  
>>> Like many times before you, you don't seem to understand their statement.
>>> So nobody needs to go off on a tangent again.
>>>  
>>> You only need to be concerned if you do something like
>>> "have a web portal to your system that has no limitation to who uses it" (as in non-hams).
>>>  
>>> If you do then they have the possibility to use the echolink system through your system and that is what they do not want.
>>>  
>>> Neither do we with allstar or via radio.
>>> I'm sure there are a few bad actors out there somewhere allowing access.
>>> just make sure it is not you.
>>>  
>>> They could use better wording to keep the confusion/fuss down.
>>>  
>>> As far as permit or deny...
>>> permit= a list that only allows calls you place in the list to connect.
>>> deny= a list of calls that can not connect.
>>> See the drupal site for info.
>>>  
>>> ...mike/kb8jnm
>>> -------- Original Message --------
>>> Subject: [App_rpt-users] Echolink and app_rpt: Looking for more
>>> information on permit=*-*
>>> From: "Bob" <kk6ecm at gmail.com>
>>> Date: Tue, November 11, 2014 10:13 pm
>>> To: <App_rpt-users at ohnosec.org>
>>> 
>>> OK... Echolink quality aside, I?m looking for some clarification how app_rpt works with Echolink.
>>>  
>>> Attempting to understand the statement from Echolink, ?If you are running Asterisk with app_rpt and an EchoLink channel, be sure it is configured not to allow other VoIP connections when an EchoLink station is connected. If this isn't practical, please disable the EchoLink channel.? It seems that ?other VoIP? means non-Echolink nodes; not sure how Allstar can do this.
>>>  
>>> How does permit=*-* (?prohibit computer-based connections?) work with an incoming Echolink computer based node, or with an app_rpt hosted Echolink node in an Echolink to Echolink configuration. When the user enters *33 to connect, is it actually Echolink nodes connecting, or is there a difference?
>>>  
>>> I think I get their point they don?t want an Allstar node with Echolink node, to simultaneously connect to another Allstar node that does not support Echolink, but not sure why... still licensed amateurs involved.
>>>  
>>> I am dismayed with Echolink?s assertion that the use of a copy of a paper license is more official than the FCC recognized ULS site, which it appears Allstarlink.org uses to validate the users license. 
>>>  
>>> Thanks,
>>> Bob
>>> kk6ecm
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> 
>>> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list          please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141112/13a6dcdb/attachment.html>

From electricity440 at gmail.com  Thu Nov 13 15:56:04 2014
From: electricity440 at gmail.com (Skyler F)
Date: Thu, 13 Nov 2014 08:56:04 -0700
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
Message-ID: <CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>

Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to
allmon.ini. It still says "could not load allmon.ini" though, unlike with
allmon 1.

Do I need to forward port 5038 to work? And where it says to use "
yourhost.com", I have a dynamic dns server kd0whb.duckdns.org, is that what
I should use? Is the username root and password the password to login to
the node?

Skyler KD?WHB

On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net> wrote:

> I second this...  I have wanted to see this work for some time now but as
> stated it only does the commands and doesn't show the connected nodes.  I
> really wish it did as I use the xipar voting and that would be great to see
> on allmon or something similar...
>
> Corey N3FE
>
> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com> wrote:
>
> I could not get Allmon to work with Xipar. You are able to connect and
> disconnect nodes but it will not populate the table with information on
> what nodes are connected. However, if there is anyone out there who has
> managed to get it working I would also like to know how!
>
> Thanks
> Steve
> M0HOY
>
>
>
>
> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
> I think it will work with Xipar as it?s merely an Asterisk Manager
> Interface client. Maybe someone here on the list can confirm.
> --
> Tim
> :wq
>
> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net> wrote:
>
> Tim
> Will this work with xipar nodes?
>
> Lu Vencl
>
> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
> --
> Tim
> :wq
>
> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net> wrote:
>
> So where is allmon v2 being hosted?
>
> Thanks & 73,
> Scott KB2EAR
>
> On 2014-11-12 09:25, Tim Sawyer wrote:
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141113/f6772977/attachment.html>

From tim.sawyer at mac.com  Thu Nov 13 17:13:26 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Thu, 13 Nov 2014 09:13:26 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
	<CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
Message-ID: <BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>

Allmon 2 changed the ini filename to almond.ini.php
--
Tim
:wq

> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com> wrote:
> 
> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to allmon.ini. It still says "could not load allmon.ini" though, unlike with allmon 1.
> 
> Do I need to forward port 5038 to work? And where it says to use "yourhost.com <http://yourhost.com/>", I have a dynamic dns server kd0whb.duckdns.org <http://kd0whb.duckdns.org/>, is that what I should use? Is the username root and password the password to login to the node?
> 
> Skyler KD?WHB
> 
> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net <mailto:n3fe at repeater.net>> wrote:
> I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...
> 
> Corey N3FE
> 
> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com <mailto:steve at m0hoy.com>> wrote:
> 
>> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
>> 
>> Thanks
>> Steve 
>> M0HOY
>> 
>> 
>> 
>> 
>>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>> 
>>> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>>> --
>>> Tim
>>> :wq
>>> 
>>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>>>> 
>>>> Tim
>>>> Will this work with xipar nodes?
>>>> 
>>>> Lu Vencl
>>>> 
>>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>> 
>>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>>>> --
>>>>> Tim
>>>>> :wq
>>>>> 
>>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>>>> 
>>>>>> So where is allmon v2 being hosted?
>>>>>> 
>>>>>> Thanks & 73,
>>>>>> Scott KB2EAR
>>>>>> 
>>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>>> 
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>>> 
>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> 
> 
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info/>
> KD?WHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141113/224550c0/attachment.html>

From tim.sawyer at mac.com  Thu Nov 13 17:14:49 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Thu, 13 Nov 2014 09:14:49 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
	<CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
	<BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>
Message-ID: <887B641F-4306-4381-9081-763B59919873@mac.com>

ARRG? auto correct. That filename should be allmon.ini.php
--
Tim
:wq

> On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
> 
> Allmon 2 changed the ini filename to almond.ini.php
> --
> Tim
> :wq
> 
>> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com <mailto:electricity440 at gmail.com>> wrote:
>> 
>> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to allmon.ini. It still says "could not load allmon.ini" though, unlike with allmon 1.
>> 
>> Do I need to forward port 5038 to work? And where it says to use "yourhost.com <http://yourhost.com/>", I have a dynamic dns server kd0whb.duckdns.org <http://kd0whb.duckdns.org/>, is that what I should use? Is the username root and password the password to login to the node?
>> 
>> Skyler KD?WHB
>> 
>> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net <mailto:n3fe at repeater.net>> wrote:
>> I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...
>> 
>> Corey N3FE
>> 
>> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com <mailto:steve at m0hoy.com>> wrote:
>> 
>>> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
>>> 
>>> Thanks
>>> Steve 
>>> M0HOY
>>> 
>>> 
>>> 
>>> 
>>>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>> 
>>>> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>>>> --
>>>> Tim
>>>> :wq
>>>> 
>>>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>>>>> 
>>>>> Tim
>>>>> Will this work with xipar nodes?
>>>>> 
>>>>> Lu Vencl
>>>>> 
>>>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>>> 
>>>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>>>>> --
>>>>>> Tim
>>>>>> :wq
>>>>>> 
>>>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>>>>> 
>>>>>>> So where is allmon v2 being hosted?
>>>>>>> 
>>>>>>> Thanks & 73,
>>>>>>> Scott KB2EAR
>>>>>>> 
>>>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>>>> 
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> 
>> 
>> -- 
>> Skyler Fennell
>> amsatnet.info <http://amsatnet.info/>
>> KD?WHB
>> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141113/56a94028/attachment.html>

From saliksatti at yahoo.com  Fri Nov 14 04:27:35 2014
From: saliksatti at yahoo.com (Salik Satti)
Date: Fri, 14 Nov 2014 04:27:35 +0000 (UTC)
Subject: [App_rpt-users] Installation And configuration of URIs with
	asterisk app_rpt
Message-ID: <1448380655.410804.1415939255537.JavaMail.yahoo@jws100169.mail.ne1.yahoo.com>

Hi All,????????? I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance.
?Salik Mumtaz Satti, A-EXEN
National Radio And Telecommunication Corporation, Haripur Pakistan 
www.nrtc.com.pk
salik.satti at nrtc.com.pk
Contact: +923155414048
Skype: salik.satti6

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/271252a9/attachment.html>

From electricity440 at gmail.com  Fri Nov 14 05:20:03 2014
From: electricity440 at gmail.com (Skyler Fennell)
Date: Thu, 13 Nov 2014 22:20:03 -0700
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
Message-ID: <1735F950-720E-41A1-A0D0-9FD7E106D412@gmail.com>

Why does every link hate each other?


IRLP hates Allstar, just because it can go through a phone and they want to keep the radio to it.

Echolink now taken Allstar off its policy because of some "security issues"

Allstar users dislike echolink because of the poor audio quality

Isn't ham radio just for two way communication, whatever the most effecient way you can contact someone during an emergency should be prioritized.

As time progresses, more and more Allstar nodes are becoming private in my area, and I can't connect to some places I used to have great friends on the systems. 

Can't we just get along? If a friend built an IRLP node far away, why can't someone talk to him, just because they have a system with more linking capabilities?

During a disaster, an IRLP node on one side of the state should be able to connect to an Allstar node on another if communications are mandatory. 

The same goes toward Allstar users, people who come in through echolink and troll around will do just the same through something like the web transceiver if echolink gets shut off. And who says someone without a liscense can't buy a cheap BAOFENG on amazon for 40 bucks and troll around on any link system near them?

We're radio amateurs, we know nothing is perfect, can't we work as a team to try to enhance two way communication as best as possible? 

HF is not limited by the brand radio you have.

Skyler kd0whb




From electricity440 at gmail.com  Fri Nov 14 05:20:03 2014
From: electricity440 at gmail.com (Skyler Fennell)
Date: Thu, 13 Nov 2014 22:20:03 -0700
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>
Message-ID: <1735F950-720E-41A1-A0D0-9FD7E106D412@gmail.com>

Why does every link hate each other?


IRLP hates Allstar, just because it can go through a phone and they want to keep the radio to it.

Echolink now taken Allstar off its policy because of some "security issues"

Allstar users dislike echolink because of the poor audio quality

Isn't ham radio just for two way communication, whatever the most effecient way you can contact someone during an emergency should be prioritized.

As time progresses, more and more Allstar nodes are becoming private in my area, and I can't connect to some places I used to have great friends on the systems. 

Can't we just get along? If a friend built an IRLP node far away, why can't someone talk to him, just because they have a system with more linking capabilities?

During a disaster, an IRLP node on one side of the state should be able to connect to an Allstar node on another if communications are mandatory. 

The same goes toward Allstar users, people who come in through echolink and troll around will do just the same through something like the web transceiver if echolink gets shut off. And who says someone without a liscense can't buy a cheap BAOFENG on amazon for 40 bucks and troll around on any link system near them?

We're radio amateurs, we know nothing is perfect, can't we work as a team to try to enhance two way communication as best as possible? 

HF is not limited by the brand radio you have.

Skyler kd0whb




From doug at crompton.com  Fri Nov 14 06:01:19 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 14 Nov 2014 01:01:19 -0500
Subject: [App_rpt-users] Installation And configuration of URIs with
 asterisk app_rpt
In-Reply-To: <1448380655.410804.1415939255537.JavaMail.yahoo@jws100169.mail.ne1.yahoo.com>
References: <1448380655.410804.1415939255537.JavaMail.yahoo@jws100169.mail.ne1.yahoo.com>
Message-ID: <BLU172-W505AE5FDB2E52FC2E195F3BA8C0@phx.gbl>

Salik,

  I think you need to give us more information. What kind of problems are you having? Is it just with the DMK URI or Allstar in general?

The DMK URI's green LED should light up at boot and if you type at the Linux prompt 'lsusb' you should see it listed. That would be your first step. It should look like this. The C-media device is the DMK URI. You may have other USB devices present also.

[root at WA3DSP_Allstar ~]# lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0d8c:013a C-Media Electronics, Inc.
Bus 002 Device 001: ID 0000:0000

If that seems OK then when you start Asterisk and everything is configured properly the green LED should blink at about a 2pps rate.

As far as your node is concerned, have you received a node number and password from allstarlink.org?

If you have questions about the configuration files I am sure someone here could help you.

Also have you considered using the Beagle Bone Black for your node? I am not sure if that is available in your country or how easy it is to get but it is much easier to setup and use. If you had all the hardware you could have it setup and running in 10 minutes or less. The DMK URI would be the most expensive item and you already have that. You can view the web page at:

hamvoip.org
 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Fri, 14 Nov 2014 04:27:35 +0000
From: saliksatti at yahoo.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Installation And configuration of URIs with	asterisk app_rpt

Hi All,          I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance.
 Salik Mumtaz Satti, A-EXEN

National Radio And Telecommunication Corporation, Haripur Pakistan 

www.nrtc.com.pk

salik.satti at nrtc.com.pk

Contact: +923155414048

Skype: salik.satti6




_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/8f0e34a6/attachment.html>

From doug at crompton.com  Fri Nov 14 07:04:24 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 14 Nov 2014 02:04:24 -0500
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
 ore_information_on_permit=*-*
In-Reply-To: <1735F950-720E-41A1-A0D0-9FD7E106D412@gmail.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>,
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>,
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>,
	<2CD41B7D0C2A4C4F940628E71AE64757@georgecPC>,
	<1735F950-720E-41A1-A0D0-9FD7E106D412@gmail.com>
Message-ID: <BLU172-W25940F84B0E689B949D7D5BA8C0@phx.gbl>

Skyler,

 You are absolutely right, there is no reason for the turf wars other than politics and peoples egos. 

I don't think that Allstar has a policy against anything other than abiding by legal amateur radio practices and I think we police our networks well. You often hear the echolink audio quality statements on Allstar and in most cases it is true. Echolink originating on PC's with all kinds of crazy microphone arrangements often leads to bizarre and distorted audio. I have found that iphones, ipads, and other phones seems to work well and produce some of the best echolink audio. Even though we complain about it we still have an open policy on our end and welcome any and all (FCC) legal experimentation on our networks with any other digital format.

The reason Allstar is more open is because it is open source software not owned by anyone and for the most part not controlled but a private individual or group. Yes there are databases, webpage, software repsoitory maintained by individuals that freely give their time to do that but if one wanted to setup their own database and start another network they could. I am certainly not advocating that just using it as an example.  Of course you could start another completely different amateur VOIP network also. That is how all these were born in the first place. Someone had an idea and ran with it.

As for people going "private" on Allstar well that is their prerogative. Often it is done because it is a link or specific repeater system. That is the beauty of Allstar, you can configure it, add to it, change it, use it any way you like. I think there are more individual Allstar nodes recently coming online with the advent of the BBB and most are not private.  

Both IRLP and Echolink are not open source and the code and networks are tightly controlled although they have very different philosophies. 

Echolink claims to have superior control of keeping non-hams off the network. I really think this is a non-issue because I have not seen this problem on any network and when it does happen it is quickly taken care of. Echolink is probably 75% or more computer to computer. Echolink is really more like an amateur radio only Teamviewer or Skype although both of them have better audio quality.

To me IRLP is just bizarre in how it works and although I did use it I quickly realized it was not for me. It is run by one individual who (I guess) makes money on it as you have to buy a board from him before he assigns you a node number. It also has the policy of NO non-radio connections thus the beef with Allstar, although I think there was probably more to that though than the radio only issue. IRLP also is half duplex and only allows one connection at a time. They do have what they call reflectors that are special servers setup with the permission of Mr. IRLP which allow multiple connections. These reflectors become like repeaters, often very political with a single administrator that sets the rules, how long you can talk, who can connect, etc. Totally unlike Allstar's operation or philosophy.

Today, in the real world these systems are often interconnected even though IRLP and now Echolink claim to be autonomous networks. The Alaska Morning net which is on for 2 hours 6 days a week is a prime example where Allstar, IRLP, and Echolink are interconnected and there are many others.

And again I will repeat, as long as we are responsible, FCC rule abiding hams I don't think these interconnections are a problem and I am sure they will go on. This issue could be discussed to death and like politics and religion there will never be a consensus. These interconnection problems are not unique to amateur radio as everytime we have a disaster you always hear about one government agency not being able to talk to another because of radio systems not being compatible and it often boils down to a political (people) problem rather than an equipment problem. I think it is called life, why can't we all get along!

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: electricity440 at gmail.com
> Date: Thu, 13 Nov 2014 22:20:03 -0700
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m	ore_information_on_permit=*-*
> 
> Why does every link hate each other?
> 
> 
> IRLP hates Allstar, just because it can go through a phone and they want to keep the radio to it.
> 
> Echolink now taken Allstar off its policy because of some "security issues"
> 
> Allstar users dislike echolink because of the poor audio quality
> 
> Isn't ham radio just for two way communication, whatever the most effecient way you can contact someone during an emergency should be prioritized.
> 
> As time progresses, more and more Allstar nodes are becoming private in my area, and I can't connect to some places I used to have great friends on the systems. 
> 
> Can't we just get along? If a friend built an IRLP node far away, why can't someone talk to him, just because they have a system with more linking capabilities?
> 
> During a disaster, an IRLP node on one side of the state should be able to connect to an Allstar node on another if communications are mandatory. 
> 
> The same goes toward Allstar users, people who come in through echolink and troll around will do just the same through something like the web transceiver if echolink gets shut off. And who says someone without a liscense can't buy a cheap BAOFENG on amazon for 40 bucks and troll around on any link system near them?
> 
> We're radio amateurs, we know nothing is perfect, can't we work as a team to try to enhance two way communication as best as possible? 
> 
> HF is not limited by the brand radio you have.
> 
> Skyler kd0whb
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/3c6fdbe8/attachment.html>

From ea8ee1 at gmail.com  Fri Nov 14 09:41:18 2014
From: ea8ee1 at gmail.com (ea8ee)
Date: Fri, 14 Nov 2014 09:41:18 +0000
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <CAM09xEYnUwSUXSjw92zi-CZw9vvBTGkySFhkj2-+KJvoYEvTgg@mail.gmail.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
	<1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>
	<CA+WM89YCYcCVtqPR1JgLRGf8Lyd+o4+9ekJFpun2=0XsUjUzzA@mail.gmail.com>
	<CAM09xEYnUwSUXSjw92zi-CZw9vvBTGkySFhkj2-+KJvoYEvTgg@mail.gmail.com>
Message-ID: <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com>

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment.html>

From steve at m0hoy.com  Fri Nov 14 10:07:56 2014
From: steve at m0hoy.com (Stephen Curtis)
Date: Fri, 14 Nov 2014 10:07:56 +0000
Subject: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
	ore_information_on_permit=*-*
In-Reply-To: <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com>
References: <20141112043614.71befee5dbd13c5325dd1a521b4e73ee.0259f43b0d.wbe@email06.secureserver.net>
	<6ED8C708-8529-4164-82C7-B0F603E8A721@bdboyle.com>
	<61F03F36-B93A-4FAA-A049-6B49D6307526@mac.com>
	<E385014C-5949-4356-89F3-BAC5F7DD23FB@m0hoy.com>
	<1E790BE2-DBD7-4EDB-B2E3-1F00D2535393@mac.com>
	<CA+WM89YCYcCVtqPR1JgLRGf8Lyd+o4+9ekJFpun2=0XsUjUzzA@mail.gmail.com>
	<CAM09xEYnUwSUXSjw92zi-CZw9vvBTGkySFhkj2-+KJvoYEvTgg@mail.gmail.com>
	<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com>
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4@m0hoy.com>

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)  





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
> 
> how active the vox mode in zoiper? maybe with a dmtf numbers?
> 
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org <mailto:N1XBM at amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can create a account on your box for zoiper set it for vox. Then get zello for PC and create a account for you node. Then create a channel for your node. Place the account into the repeater channel.  Use virtual audio cables and point zello to zoiper and cross the cables. Works slicker than sh*t! Obviously your zoiper connection is left up full time. Also I password protect my channel.
> 
> Feel free to connect to my node and I'll give you a demo.
> 
> We have a regular user who is over the road trucker and zello plays nice with his blue parrot headset also much more "PTT radio like" friendly.  Also I can record repeater activity too!
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment.html>

From cypresstower at yahoo.com  Fri Nov 14 22:44:54 2014
From: cypresstower at yahoo.com (Johnny Keeker)
Date: Fri, 14 Nov 2014 14:44:54 -0800
Subject: [App_rpt-users] EchoLink Policy Reminder
In-Reply-To: <CAPN8dryw8mh5Ze04Mfe7A9OZGhYtDGSnRwTef-B93x5d8SSNrg@mail.gmail.com>
Message-ID: <1416005094.33956.YahooMailBasic@web163604.mail.gq1.yahoo.com>

When they kill our accounts we'll say EchoStink Stunk
--------------------------------------------
On Tue, 11/11/14, Kirk Just Kirk <wb6egr at gmail.com> wrote:

 Subject: Re: [App_rpt-users] EchoLink Policy Reminder
 To: "kk6ecm" <kk6ecm at gmail.com>
 Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
 Date: Tuesday, November 11, 2014, 7:08 PM
 
 They can
 close/kill my account anytime. EchoStink sounds horrible
 most of the time...constant drivebys from dingalings that
 connect and disconnect over and over and say nothing...or
 connect at 3 in the morning and call CQ CQ. For 5
 minutes.....I am so tired of that shit I could delete it
 tonight.
 
 
 On Nov 11, 2014 2:00
 PM, "kk6ecm" <kk6ecm at gmail.com>
 wrote:
 Can anyone shed light
 on this Echolink requirement and Allstar? I'm not sure
 what makes us compliant. We have Echolink enabled on our
 repeater... I know of no way a non-ham could link in during
 an Echolink connection. Is there a way of setting app_rpt so
 an Echolink connection precludes all others? Also, Echolink
 has Apps for the PC, Android, and the iPhone/iPad... Their
 PC app (phones are RF, but not ham) seems to invalidate
 their rf only policy, although they do verify a license
 before granting a node number. What am I missing?
 
 Thanks,Bobkk6ecm
 Sent from iPad
 
 ---------- Forwarded
 message ----------
 From: EchoLink Support
 <support at echolink.org>
 Date: Wed, Sep 3, 2014 at 9:14 AM
 Subject: EchoLink Policy Reminder
 To: 
 
 
 We wanted to remind you of an important item in
 EchoLink's access policies (which can be found online at
 http://www.echolink.org/access_policies.htm).
 
 
 
 In general, EchoLink does not permit cross-linking.
 
 
 
 More specifically, EchoLink does not permit cross-linking
 with other VoIP systems that can be accessed off-the-air
 (for example, directly from a PC or Web browser).? This is
 because other systems may have a validation procedure that
 is far less comprehensive than EchoLink's, and we want
 to continue to ensure that EchoLink is solely for use by
 licensed Amateur Radio operators around the world.
 
 
 
 Therefore, while excellent systems such as Zello, AllStar,
 eQSO, WIRES-II, etc. all serve an important purpose within
 the Amateur Radio community, our policy is that they cannot
 be directly connected to a registered EchoLink node.
 
 
 
 In other words, your node must function only as a direct RF
 gateway, and not as a cross-link to another system. If your
 node is reachable through another path, that path must be
 disabled when an EchoLink connection is in progress. For
 example, an EchoIRLP node is permitted, since it functions
 only as an RF gateway when an EchoLink connection is
 made.
 
 
 
 If you are running Asterisk with app_rpt and an EchoLink
 channel, be sure it is configured not to allow other VoIP
 connections when an EchoLink station is connected. If this
 isn't practical, please disable the EchoLink channel.
 
 
 
 Thanks for ensuring that your node adheres to this policy.
 In some cases we do restrict logins to be sure the policy is
 being followed.
 
 
 
 73
 
 EchoLink Support
 
 
 
 (Note: This mailbox is not able to handle replies. For help
 and information, please see www.echolink.org/support.htm)
 
 
 
 
 _______________________________________________
 
 App_rpt-users mailing list
 
 App_rpt-users at ohnosec.org
 
 http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
 
 
 To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 and scroll down to the bottom of the page. Enter your email
 address and press the "Unsubscribe or edit options
 button"
 
 You do not need a password to unsubscribe, you can do it via
 email confirmation. If you have trouble unsubscribing,
 please send a message to the list detailing the problem. 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 App_rpt-users mailing list
 App_rpt-users at ohnosec.org
 http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
 To unsubscribe from this list
 please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 and scroll down to the bottom of the page. Enter your
 email address and press the "Unsubscribe or edit
 options button"
 You do not need a
 password to unsubscribe, you can do it via email
 confirmation. If you have trouble unsubscribing, please send
 a message to the list detailing the problem.
 


From kc7mrq at bresnan.net  Sat Nov 15 06:10:57 2014
From: kc7mrq at bresnan.net (Corey)
Date: Fri, 14 Nov 2014 23:10:57 -0700
Subject: [App_rpt-users] Voter board
Message-ID: <5466EE71.1090107@bresnan.net>


I built a through hole voter board and interfaced it to a GPS 18 LVC and 
my server. I set the board up as a master, transmit. The LED shows the 
GPS locked and 98 command shows the GPS,
but I am getting the following error when telnetting into the board:

Warning: GPS Data time period elapsed.

The error is timestamped and occurs every second. I made sure the data 
format was NMEA per archived messages on here by connecting the GPS to 
SNSRCFG. The config appears to be set up correctly.
What other areas do I need to look at to fix this warning?

I did notice you can choose quite a few NMEA messages in the SNSRCFG 
profile. Does it matter if all are checked?

I have a second issue with updating the firmware. The board is at Rev 
1.41. I tried updating it, but haven't had any luck so far. Nothing 
happens when I click on the "capture target" button after resetting the 
voter board. The target ip is the voter board and the bootloader ip in 
the voter is my laptop with ENC_Loader.

  The IC(s) were originally programmed by a friend in another state so I 
never experienced what it take to do the initial programming.


Thanks for your help,
Corey


From rpt2 at chuck.midlandsnetworking.com  Sat Nov 15 06:27:46 2014
From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson)
Date: Sat, 15 Nov 2014 00:27:46 -0600
Subject: [App_rpt-users] Voter board
In-Reply-To: <5466EE71.1090107@bresnan.net>
References: <5466EE71.1090107@bresnan.net>
Message-ID: <CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>

set the bootloader IP to be the same as the voter board IP, or make it
different than anything else on the network.  It is the IP that the voter
board uses when it is running the bootloader code.  It can not have the
same IP as your laptop.  That will not work.

On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:

>
> I built a through hole voter board and interfaced it to a GPS 18 LVC and
> my server. I set the board up as a master, transmit. The LED shows the GPS
> locked and 98 command shows the GPS,
> but I am getting the following error when telnetting into the board:
>
> Warning: GPS Data time period elapsed.
>
> The error is timestamped and occurs every second. I made sure the data
> format was NMEA per archived messages on here by connecting the GPS to
> SNSRCFG. The config appears to be set up correctly.
> What other areas do I need to look at to fix this warning?
>
> I did notice you can choose quite a few NMEA messages in the SNSRCFG
> profile. Does it matter if all are checked?
>
> I have a second issue with updating the firmware. The board is at Rev
> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
> when I click on the "capture target" button after resetting the voter
> board. The target ip is the voter board and the bootloader ip in the voter
> is my laptop with ENC_Loader.
>
>  The IC(s) were originally programmed by a friend in another state so I
> never experienced what it take to do the initial programming.
>
>
> Thanks for your help,
> Corey
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/67ae2ac4/attachment.html>

From rpt2 at chuck.midlandsnetworking.com  Sat Nov 15 06:36:19 2014
From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson)
Date: Sat, 15 Nov 2014 00:36:19 -0600
Subject: [App_rpt-users] Voter board
In-Reply-To: <CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
References: <5466EE71.1090107@bresnan.net>
	<CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
Message-ID: <CADEYVwiA4V6dkUSOhyNHFfOgor4yaKhojp9HweNzkJByNCutcw@mail.gmail.com>

An easy error is having the TX and RX swapped where you connect the GPS to
the voter board. Try it the other way.

On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson <
rpt2 at chuck.midlandsnetworking.com> wrote:

> set the bootloader IP to be the same as the voter board IP, or make it
> different than anything else on the network.  It is the IP that the voter
> board uses when it is running the bootloader code.  It can not have the
> same IP as your laptop.  That will not work.
>
> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>
>>
>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>> my server. I set the board up as a master, transmit. The LED shows the GPS
>> locked and 98 command shows the GPS,
>> but I am getting the following error when telnetting into the board:
>>
>> Warning: GPS Data time period elapsed.
>>
>> The error is timestamped and occurs every second. I made sure the data
>> format was NMEA per archived messages on here by connecting the GPS to
>> SNSRCFG. The config appears to be set up correctly.
>> What other areas do I need to look at to fix this warning?
>>
>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>> profile. Does it matter if all are checked?
>>
>> I have a second issue with updating the firmware. The board is at Rev
>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>> when I click on the "capture target" button after resetting the voter
>> board. The target ip is the voter board and the bootloader ip in the voter
>> is my laptop with ENC_Loader.
>>
>>  The IC(s) were originally programmed by a friend in another state so I
>> never experienced what it take to do the initial programming.
>>
>>
>> Thanks for your help,
>> Corey
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>> page. Enter your email address and press the "Unsubscribe or edit options
>> button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/853a9207/attachment.html>

From rpt2 at chuck.midlandsnetworking.com  Sat Nov 15 06:51:05 2014
From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson)
Date: Sat, 15 Nov 2014 00:51:05 -0600
Subject: [App_rpt-users] Voter board
In-Reply-To: <CADEYVwiA4V6dkUSOhyNHFfOgor4yaKhojp9HweNzkJByNCutcw@mail.gmail.com>
References: <5466EE71.1090107@bresnan.net>
	<CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
	<CADEYVwiA4V6dkUSOhyNHFfOgor4yaKhojp9HweNzkJByNCutcw@mail.gmail.com>
Message-ID: <CADEYVwh47howqRH1Ls++GhxryFd1QbYWDLZ3gufhSVhT2s9mtg@mail.gmail.com>

I should be asleep, or maybe I am.  I just re-read your message and now I
see you said that you do have GPS lock so ignore what I said about TX and
RX.
If you only have that problem when you telnet into the board, I have seen
that when I have a poor quality network connection between the pc and the
voter board.  I think that the board gets too busy with re-sending on the
ethernet and then has trouble reading the serial port data from the GPS.
If they are on the same LAN then use a switch instead of a hub and make
sure that duplex is correct for everything on the LAN segment.  Also make
sure that your netmask is set correctly (the same) on everything on the LAN.
Also just go with the default NEMA messages, you do not need any other than
the default.

On Sat, Nov 15, 2014 at 12:36 AM, Chuck Henderson <
rpt2 at chuck.midlandsnetworking.com> wrote:

> An easy error is having the TX and RX swapped where you connect the GPS to
> the voter board. Try it the other way.
>
> On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson <
> rpt2 at chuck.midlandsnetworking.com> wrote:
>
>> set the bootloader IP to be the same as the voter board IP, or make it
>> different than anything else on the network.  It is the IP that the voter
>> board uses when it is running the bootloader code.  It can not have the
>> same IP as your laptop.  That will not work.
>>
>> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>>
>>>
>>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>>> my server. I set the board up as a master, transmit. The LED shows the GPS
>>> locked and 98 command shows the GPS,
>>> but I am getting the following error when telnetting into the board:
>>>
>>> Warning: GPS Data time period elapsed.
>>>
>>> The error is timestamped and occurs every second. I made sure the data
>>> format was NMEA per archived messages on here by connecting the GPS to
>>> SNSRCFG. The config appears to be set up correctly.
>>> What other areas do I need to look at to fix this warning?
>>>
>>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>>> profile. Does it matter if all are checked?
>>>
>>> I have a second issue with updating the firmware. The board is at Rev
>>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>>> when I click on the "capture target" button after resetting the voter
>>> board. The target ip is the voter board and the bootloader ip in the voter
>>> is my laptop with ENC_Loader.
>>>
>>>  The IC(s) were originally programmed by a friend in another state so I
>>> never experienced what it take to do the initial programming.
>>>
>>>
>>> Thanks for your help,
>>> Corey
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>>> page. Enter your email address and press the "Unsubscribe or edit options
>>> button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/70101ed6/attachment.html>

From mark at tinney.us  Sat Nov 15 14:30:12 2014
From: mark at tinney.us (mark at tinney.us)
Date: Sat, 15 Nov 2014 09:30:12 -0500
Subject: [App_rpt-users] App_rpt-users Channel A audio lost
In-Reply-To: <mailman.1.1415984409.27128.app_rpt-users@ohnosec.org>
References: <mailman.1.1415984409.27128.app_rpt-users@ohnosec.org>
Message-ID: <A158DC121ED446D0BF82334CCD795451@MkTinneyPC>

I am not sure if this is how I get help but here is my question:

I have a BBB running and everything works fine until I eventually start 
getting a carrier only on channel A audio output, I have audio on channel B 
when A is not working as I have channel B setup as a monitor in the repeater 
building. Do you have any suggestions for me to try to figure out this 
problem?

Thanks,
Mark
W4GVX

-----Original Message----- 
From: app_rpt-users-request at ohnosec.org
Sent: Friday, November 14, 2014 12:00 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 26

Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (ea8ee)
   2. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (Stephen Curtis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Nov 2014 09:41:18 +0000
From: ea8ee <ea8ee1 at gmail.com>
To: Robert Newberry <N1XBM at amsat.org>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID:
<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 14 Nov 2014 10:07:56 +0000
From: Stephen Curtis <steve at m0hoy.com>
To: ea8ee <ea8ee1 at gmail.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
Content-Type: text/plain; charset="iso-8859-1"

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> <mailto:N1XBM at amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can 
> create a account on your box for zoiper set it for vox. Then get zello for 
> PC and create a account for you node. Then create a channel for your node. 
> Place the account into the repeater channel.  Use virtual audio cables and 
> point zello to zoiper and cross the cables. Works slicker than sh*t! 
> Obviously your zoiper connection is left up full time. Also I password 
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice 
> with his blue parrot headset also much more "PTT radio like" friendly. 
> Also I can record repeater activity too!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 26
*********************************************



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 



From doug at crompton.com  Sat Nov 15 15:46:40 2014
From: doug at crompton.com (Doug Crompton)
Date: Sat, 15 Nov 2014 10:46:40 -0500
Subject: [App_rpt-users] App_rpt-users Channel A audio lost
In-Reply-To: <A158DC121ED446D0BF82334CCD795451@MkTinneyPC>
References: <mailman.1.1415984409.27128.app_rpt-users@ohnosec.org>,
	<A158DC121ED446D0BF82334CCD795451@MkTinneyPC>
Message-ID: <BLU172-W383F2071A0A71758BDCD29BA8D0@phx.gbl>

Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: mark at tinney.us
> To: app_rpt-users at ohnosec.org
> Date: Sat, 15 Nov 2014 09:30:12 -0500
> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
> 
> I am not sure if this is how I get help but here is my question:
> 
> I have a BBB running and everything works fine until I eventually start 
> getting a carrier only on channel A audio output, I have audio on channel B 
> when A is not working as I have channel B setup as a monitor in the repeater 
> building. Do you have any suggestions for me to try to figure out this 
> problem?
> 
> Thanks,
> Mark
> W4GVX
> 
> -----Original Message----- 
> From: app_rpt-users-request at ohnosec.org
> Sent: Friday, November 14, 2014 12:00 PM
> To: app_rpt-users at ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 26
> 
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (ea8ee)
>    2. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (Stephen Curtis)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 14 Nov 2014 09:41:18 +0000
> From: ea8ee <ea8ee1 at gmail.com>
> To: Robert Newberry <N1XBM at amsat.org>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID:
> <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> how active the vox mode in zoiper? maybe with a dmtf numbers?
> 
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:
> 
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 14 Nov 2014 10:07:56 +0000
> From: Stephen Curtis <steve at m0hoy.com>
> To: ea8ee <ea8ee1 at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> In extensions.conf final line add lowercase v after the P
> 
> 
> > exten=00000,1,answer()
> > exten=00000,n,Playback(rpt/node)
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(rpt/connected)
> 
> > exten=00000,n,rpt(0000|Pv)
> 
> 
> 
> 
> 
> > On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
> >
> > how active the vox mode in zoiper? maybe with a dmtf numbers?
> >
> > 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> > <mailto:N1XBM at amsat.org>>:
> > I think this has come up before,  but if you have a spare PC you can 
> > create a account on your box for zoiper set it for vox. Then get zello for 
> > PC and create a account for you node. Then create a channel for your node. 
> > Place the account into the repeater channel.  Use virtual audio cables and 
> > point zello to zoiper and cross the cables. Works slicker than sh*t! 
> > Obviously your zoiper connection is left up full time. Also I password 
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice 
> > with his blue parrot headset also much more "PTT radio like" friendly. 
> > Also I can record repeater activity too!
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> > down to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> > to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 26
> *********************************************
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/3268a8a6/attachment.html>

From mark at tinney.us  Sat Nov 15 16:09:04 2014
From: mark at tinney.us (Mark Tinney)
Date: Sat, 15 Nov 2014 11:09:04 -0500
Subject: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28
Message-ID: <c7aw46x7ifxrwaaagpa03vot.1416067744565@email.android.com>

I have purchased a new URI from DMK and have the same problem, I plan to move it to channel B and see if it fails. I know enough about Linux to move around and execute files but wasn't sure if Asterisk was killing the channel and don't really know how to check.


Sent from my Verizon Wireless 4G LTE smartphone


-------- Original message --------
From: app_rpt-users-request at ohnosec.org 
Date: 11/15/2014  10:46  (GMT-05:00) 
To: app_rpt-users at ohnosec.org 
Subject: App_rpt-users Digest, Vol 69, Issue 28 

Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: App_rpt-users Channel A audio lost (mark at tinney.us)
   2. Re: App_rpt-users Channel A audio lost (Doug Crompton)


----------------------------------------------------------------------

Message: 1
Date: Sat, 15 Nov 2014 09:30:12 -0500
From: <mark at tinney.us>
To: <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <A158DC121ED446D0BF82334CCD795451 at MkTinneyPC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

I am not sure if this is how I get help but here is my question:

I have a BBB running and everything works fine until I eventually start 
getting a carrier only on channel A audio output, I have audio on channel B 
when A is not working as I have channel B setup as a monitor in the repeater 
building. Do you have any suggestions for me to try to figure out this 
problem?

Thanks,
Mark
W4GVX

-----Original Message----- 
From: app_rpt-users-request at ohnosec.org
Sent: Friday, November 14, 2014 12:00 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 26

Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (ea8ee)
   2. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (Stephen Curtis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Nov 2014 09:41:18 +0000
From: ea8ee <ea8ee1 at gmail.com>
To: Robert Newberry <N1XBM at amsat.org>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID:
<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 14 Nov 2014 10:07:56 +0000
From: Stephen Curtis <steve at m0hoy.com>
To: ea8ee <ea8ee1 at gmail.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
Content-Type: text/plain; charset="iso-8859-1"

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> <mailto:N1XBM at amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can 
> create a account on your box for zoiper set it for vox. Then get zello for 
> PC and create a account for you node. Then create a channel for your node. 
> Place the account into the repeater channel.  Use virtual audio cables and 
> point zello to zoiper and cross the cables. Works slicker than sh*t! 
> Obviously your zoiper connection is left up full time. Also I password 
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice 
> with his blue parrot headset also much more "PTT radio like" friendly. 
> Also I can record repeater activity too!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 26
*********************************************



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 



------------------------------

Message: 2
Date: Sat, 15 Nov 2014 10:46:40 -0500
From: Doug Crompton <doug at crompton.com>
To: "mark at tinney.us" <mark at tinney.us>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <BLU172-W383F2071A0A71758BDCD29BA8D0 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: mark at tinney.us
> To: app_rpt-users at ohnosec.org
> Date: Sat, 15 Nov 2014 09:30:12 -0500
> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
> 
> I am not sure if this is how I get help but here is my question:
> 
> I have a BBB running and everything works fine until I eventually start 
> getting a carrier only on channel A audio output, I have audio on channel B 
> when A is not working as I have channel B setup as a monitor in the repeater 
> building. Do you have any suggestions for me to try to figure out this 
> problem?
> 
> Thanks,
> Mark
> W4GVX
> 
> -----Original Message----- 
> From: app_rpt-users-request at ohnosec.org
> Sent: Friday, November 14, 2014 12:00 PM
> To: app_rpt-users at ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 26
> 
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (ea8ee)
>    2. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (Stephen Curtis)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 14 Nov 2014 09:41:18 +0000
> From: ea8ee <ea8ee1 at gmail.com>
> To: Robert Newberry <N1XBM at amsat.org>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID:
> <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> how active the vox mode in zoiper? maybe with a dmtf numbers?
> 
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:
> 
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 14 Nov 2014 10:07:56 +0000
> From: Stephen Curtis <steve at m0hoy.com>
> To: ea8ee <ea8ee1 at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> In extensions.conf final line add lowercase v after the P
> 
> 
> > exten=00000,1,answer()
> > exten=00000,n,Playback(rpt/node)
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(rpt/connected)
> 
> > exten=00000,n,rpt(0000|Pv)
> 
> 
> 
> 
> 
> > On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
> >
> > how active the vox mode in zoiper? maybe with a dmtf numbers?
> >
> > 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> > <mailto:N1XBM at amsat.org>>:
> > I think this has come up before,  but if you have a spare PC you can 
> > create a account on your box for zoiper set it for vox. Then get zello for 
> > PC and create a account for you node. Then create a channel for your node. 
> > Place the account into the repeater channel.  Use virtual audio cables and 
> > point zello to zoiper and cross the cables. Works slicker than sh*t! 
> > Obviously your zoiper connection is left up full time. Also I password 
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice 
> > with his blue parrot headset also much more "PTT radio like" friendly. 
> > Also I can record repeater activity too!
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> > down to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> > to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 26
> *********************************************
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/3268a8a6/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 28
*********************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/47c860d7/attachment.html>

From kc7mrq at bresnan.net  Sat Nov 15 16:59:07 2014
From: kc7mrq at bresnan.net (Corey)
Date: Sat, 15 Nov 2014 09:59:07 -0700
Subject: [App_rpt-users] Voter board
In-Reply-To: <CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
References: <5466EE71.1090107@bresnan.net>
	<CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
Message-ID: <5467865B.8000503@bresnan.net>

Chuck,
Thanks for clarifying the IP issue. The board upgraded just fine once I 
made the change.

Corey
On 11/14/2014 11:27 PM, Chuck Henderson wrote:
> set the bootloader IP to be the same as the voter board IP, or make it 
> different than anything else on the network.  It is the IP that the 
> voter board uses when it is running the bootloader code.  It can not 
> have the same IP as your laptop.  That will not work.
>
> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net 
> <mailto:kc7mrq at bresnan.net>> wrote:
>
>
>     I built a through hole voter board and interfaced it to a GPS 18
>     LVC and my server. I set the board up as a master, transmit. The
>     LED shows the GPS locked and 98 command shows the GPS,
>     but I am getting the following error when telnetting into the board:
>
>     Warning: GPS Data time period elapsed.
>
>     The error is timestamped and occurs every second. I made sure the
>     data format was NMEA per archived messages on here by connecting
>     the GPS to SNSRCFG. The config appears to be set up correctly.
>     What other areas do I need to look at to fix this warning?
>
>     I did notice you can choose quite a few NMEA messages in the
>     SNSRCFG profile. Does it matter if all are checked?
>
>     I have a second issue with updating the firmware. The board is at
>     Rev 1.41. I tried updating it, but haven't had any luck so far.
>     Nothing happens when I click on the "capture target" button after
>     resetting the voter board. The target ip is the voter board and
>     the bootloader ip in the voter is my laptop with ENC_Loader.
>
>      The IC(s) were originally programmed by a friend in another state
>     so I never experienced what it take to do the initial programming.
>
>
>     Thanks for your help,
>     Corey
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/ec68b94a/attachment.html>

From kc7mrq at bresnan.net  Sat Nov 15 17:59:04 2014
From: kc7mrq at bresnan.net (Corey)
Date: Sat, 15 Nov 2014 10:59:04 -0700
Subject: [App_rpt-users] Voter board
In-Reply-To: <CADEYVwh47howqRH1Ls++GhxryFd1QbYWDLZ3gufhSVhT2s9mtg@mail.gmail.com>
References: <5466EE71.1090107@bresnan.net>
	<CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og@mail.gmail.com>
	<CADEYVwiA4V6dkUSOhyNHFfOgor4yaKhojp9HweNzkJByNCutcw@mail.gmail.com>
	<CADEYVwh47howqRH1Ls++GhxryFd1QbYWDLZ3gufhSVhT2s9mtg@mail.gmail.com>
Message-ID: <54679468.1030607@bresnan.net>

Chuck,
I logged into the switch(Cisco 2950) and it shows the port running at 
10Mbit half duplex. The switch doesn't change to full duplex when I 
change duplex setting on the voter.

I noticed at the bottom of the "98" printout there is an issue with 
system time not being set. Could that have anything to do with the issue?



S/W Version: 1.48 09/23/2014
System Uptime: 74.6 Secs
IP Address: 192.168.0.142
Netmask: 255.255.255.0
Gateway: 192.168.0.1
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4
DHCP: 0
VOTER Server IP: 192.168.0.178
VOTER Server UDP Port: 667
OUR UDP Port: 667
GPS Lock: 1
Connected: 1
COR: 0
EXT CTCSS IN: 1
PTT: 0
RSSI: 0
Current Samples / Sec.: 8000
Current Peak Audio Level: 184
Squelch Noise Gain Value: 0, Diode Cal. Value: 0, SQL pot 508
Current Time: Sat  Nov 15, 2014  17:31:12.920
Last Rx Pkt System time: <System Time Not Set>, diff: -1266534760 msec
Last Rx Pkt Timestamp time: <System Time Not Set>, diff: 0 msec
Last Rx Pkt index: 0, inbounds: 0


Corey

On 11/14/2014 11:51 PM, Chuck Henderson wrote:
> I should be asleep, or maybe I am.  I just re-read your message and 
> now I see you said that you do have GPS lock so ignore what I said 
> about TX and RX.
> If you only have that problem when you telnet into the board, I have 
> seen that when I have a poor quality network connection between the pc 
> and the voter board.  I think that the board gets too busy with 
> re-sending on the ethernet and then has trouble reading the serial 
> port data from the GPS. If they are on the same LAN then use a switch 
> instead of a hub and make sure that duplex is correct for everything 
> on the LAN segment.  Also make sure that your netmask is set correctly 
> (the same) on everything on the LAN.
> Also just go with the default NEMA messages, you do not need any other 
> than the default.
>
> On Sat, Nov 15, 2014 at 12:36 AM, Chuck Henderson 
> <rpt2 at chuck.midlandsnetworking.com 
> <mailto:rpt2 at chuck.midlandsnetworking.com>> wrote:
>
>     An easy error is having the TX and RX swapped where you connect
>     the GPS to the voter board. Try it the other way.
>
>     On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson
>     <rpt2 at chuck.midlandsnetworking.com
>     <mailto:rpt2 at chuck.midlandsnetworking.com>> wrote:
>
>         set the bootloader IP to be the same as the voter board IP, or
>         make it different than anything else on the network.  It is
>         the IP that the voter board uses when it is running the
>         bootloader code.  It can not have the same IP as your laptop. 
>         That will not work.
>
>         On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net
>         <mailto:kc7mrq at bresnan.net>> wrote:
>
>
>             I built a through hole voter board and interfaced it to a
>             GPS 18 LVC and my server. I set the board up as a master,
>             transmit. The LED shows the GPS locked and 98 command
>             shows the GPS,
>             but I am getting the following error when telnetting into
>             the board:
>
>             Warning: GPS Data time period elapsed.
>
>             The error is timestamped and occurs every second. I made
>             sure the data format was NMEA per archived messages on
>             here by connecting the GPS to SNSRCFG. The config appears
>             to be set up correctly.
>             What other areas do I need to look at to fix this warning?
>
>             I did notice you can choose quite a few NMEA messages in
>             the SNSRCFG profile. Does it matter if all are checked?
>
>             I have a second issue with updating the firmware. The
>             board is at Rev 1.41. I tried updating it, but haven't had
>             any luck so far. Nothing happens when I click on the
>             "capture target" button after resetting the voter board.
>             The target ip is the voter board and the bootloader ip in
>             the voter is my laptop with ENC_Loader.
>
>              The IC(s) were originally programmed by a friend in
>             another state so I never experienced what it take to do
>             the initial programming.
>
>
>             Thanks for your help,
>             Corey
>             _______________________________________________
>             App_rpt-users mailing list
>             App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>             http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>             To unsubscribe from this list please visit
>             http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>             and scroll down to the bottom of the page. Enter your
>             email address and press the "Unsubscribe or edit options
>             button"
>             You do not need a password to unsubscribe, you can do it
>             via email confirmation. If you have trouble unsubscribing,
>             please send a message to the list detailing the problem. 
>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/ffe82571/attachment.html>

From doug at crompton.com  Sun Nov 16 02:26:05 2014
From: doug at crompton.com (Doug Crompton)
Date: Sat, 15 Nov 2014 21:26:05 -0500
Subject: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28
In-Reply-To: <c7aw46x7ifxrwaaagpa03vot.1416067744565@email.android.com>
References: <c7aw46x7ifxrwaaagpa03vot.1416067744565@email.android.com>
Message-ID: <BLU172-W4727C7C416CDD599914E1FBA8A0@phx.gbl>

Mark,

 Channel B but it only puts out what is on channel A so why have both. You could feed a monitor off of the same line as the TX input on channel A as long as you didn't load it. It seems silly to run two channels with the same audio. Just more work for the processor. Anyhow to answer your question, no, there is not any known problem with audio out on channel A. We all use it and it works. If you have two different FOBs that are doing the same thing I would check the audio path out of the FOB to the TX. My guess is that there is a problem there. Make sure you have channel A set to voice in simpleusb.conf.  That is where it defaults to so it should be right to begin with. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 15 Nov 2014 11:09:04 -0500
From: mark at tinney.us
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 28

I have purchased a new URI from DMK and have the same problem, I plan to move it to channel B and see if it fails. I know enough about Linux to move around and execute files but wasn't sure if Asterisk was killing the channel and don't really know how to check.

Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: app_rpt-users-request at ohnosec.org 
Date: 11/15/2014  10:46  (GMT-05:00) 
To: app_rpt-users at ohnosec.org 
Subject: App_rpt-users Digest, Vol 69, Issue 28 

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: App_rpt-users Channel A audio lost (mark at tinney.us)
   2. Re: App_rpt-users Channel A audio lost (Doug Crompton)


----------------------------------------------------------------------

Message: 1
Date: Sat, 15 Nov 2014 09:30:12 -0500
From: <mark at tinney.us>
To: <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <A158DC121ED446D0BF82334CCD795451 at MkTinneyPC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

I am not sure if this is how I get help but here is my question:

I have a BBB running and everything works fine until I eventually start 
getting a carrier only on channel A audio output, I have audio on channel B 
when A is not working as I have channel B setup as a monitor in the repeater 
building. Do you have any suggestions for me to try to figure out this 
problem?

Thanks,
Mark
W4GVX

-----Original Message----- 
From: app_rpt-users-request at ohnosec.org
Sent: Friday, November 14, 2014 12:00 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 69, Issue 26

Send App_rpt-users mailing list submissions to
app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (ea8ee)
   2. Re: Echolink_and_app_rpt:_Looking_for_m
      ore_information_on_permit=*-* (Stephen Curtis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 14 Nov 2014 09:41:18 +0000
From: ea8ee <ea8ee1 at gmail.com>
To: Robert Newberry <N1XBM at amsat.org>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID:
<CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

how active the vox mode in zoiper? maybe with a dmtf numbers?

2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:

> I think this has come up before,  but if you have a spare PC you can
> create a account on your box for zoiper set it for vox. Then get zello for
> PC and create a account for you node. Then create a channel for your node.
> Place the account into the repeater channel.  Use virtual audio cables and
> point zello to zoiper and cross the cables. Works slicker than sh*t!
> Obviously your zoiper connection is left up full time. Also I password
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice
> with his blue parrot headset also much more "PTT radio like" friendly.
> Also I can record repeater activity too!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>

------------------------------

Message: 2
Date: Fri, 14 Nov 2014 10:07:56 +0000
From: Stephen Curtis <steve at m0hoy.com>
To: ea8ee <ea8ee1 at gmail.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
ore_information_on_permit=*-*
Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
Content-Type: text/plain; charset="iso-8859-1"

In extensions.conf final line add lowercase v after the P


> exten=00000,1,answer()
> exten=00000,n,Playback(rpt/node)
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(digits/0)            ;Change this to your node 
> number - this is what it plays when you connect
> exten=00000,n,Playback(rpt/connected)

> exten=00000,n,rpt(0000|Pv)





> On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
>
> how active the vox mode in zoiper? maybe with a dmtf numbers?
>
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> <mailto:N1XBM at amsat.org>>:
> I think this has come up before,  but if you have a spare PC you can 
> create a account on your box for zoiper set it for vox. Then get zello for 
> PC and create a account for you node. Then create a channel for your node. 
> Place the account into the repeater channel.  Use virtual audio cables and 
> point zello to zoiper and cross the cables. Works slicker than sh*t! 
> Obviously your zoiper connection is left up full time. Also I password 
> protect my channel.
>
> Feel free to connect to my node and I'll give you a demo.
>
> We have a regular user who is over the road trucker and zello plays nice 
> with his blue parrot headset also much more "PTT radio like" friendly. 
> Also I can record repeater activity too!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 26
*********************************************



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 



------------------------------

Message: 2
Date: Sat, 15 Nov 2014 10:46:40 -0500
From: Doug Crompton <doug at crompton.com>
To: "mark at tinney.us" <mark at tinney.us>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
Message-ID: <BLU172-W383F2071A0A71758BDCD29BA8D0 at phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"

Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: mark at tinney.us
> To: app_rpt-users at ohnosec.org
> Date: Sat, 15 Nov 2014 09:30:12 -0500
> Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
> 
> I am not sure if this is how I get help but here is my question:
> 
> I have a BBB running and everything works fine until I eventually start 
> getting a carrier only on channel A audio output, I have audio on channel B 
> when A is not working as I have channel B setup as a monitor in the repeater 
> building. Do you have any suggestions for me to try to figure out this 
> problem?
> 
> Thanks,
> Mark
> W4GVX
> 
> -----Original Message----- 
> From: app_rpt-users-request at ohnosec.org
> Sent: Friday, November 14, 2014 12:00 PM
> To: app_rpt-users at ohnosec.org
> Subject: App_rpt-users Digest, Vol 69, Issue 26
> 
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (ea8ee)
>    2. Re: Echolink_and_app_rpt:_Looking_for_m
>       ore_information_on_permit=*-* (Stephen Curtis)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 14 Nov 2014 09:41:18 +0000
> From: ea8ee <ea8ee1 at gmail.com>
> To: Robert Newberry <N1XBM at amsat.org>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID:
> <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> how active the vox mode in zoiper? maybe with a dmtf numbers?
> 
> 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org>:
> 
> > I think this has come up before,  but if you have a spare PC you can
> > create a account on your box for zoiper set it for vox. Then get zello for
> > PC and create a account for you node. Then create a channel for your node.
> > Place the account into the repeater channel.  Use virtual audio cables and
> > point zello to zoiper and cross the cables. Works slicker than sh*t!
> > Obviously your zoiper connection is left up full time. Also I password
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice
> > with his blue parrot headset also much more "PTT radio like" friendly.
> > Also I can record repeater activity too!
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/d789b453/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 2
> Date: Fri, 14 Nov 2014 10:07:56 +0000
> From: Stephen Curtis <steve at m0hoy.com>
> To: ea8ee <ea8ee1 at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m
> ore_information_on_permit=*-*
> Message-ID: <059961A7-71F7-452A-BA40-F53255E73CD4 at m0hoy.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> In extensions.conf final line add lowercase v after the P
> 
> 
> > exten=00000,1,answer()
> > exten=00000,n,Playback(rpt/node)
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(digits/0)            ;Change this to your node 
> > number - this is what it plays when you connect
> > exten=00000,n,Playback(rpt/connected)
> 
> > exten=00000,n,rpt(0000|Pv)
> 
> 
> 
> 
> 
> > On 14 Nov 2014, at 09:41, ea8ee <ea8ee1 at gmail.com> wrote:
> >
> > how active the vox mode in zoiper? maybe with a dmtf numbers?
> >
> > 2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM at amsat.org 
> > <mailto:N1XBM at amsat.org>>:
> > I think this has come up before,  but if you have a spare PC you can 
> > create a account on your box for zoiper set it for vox. Then get zello for 
> > PC and create a account for you node. Then create a channel for your node. 
> > Place the account into the repeater channel.  Use virtual audio cables and 
> > point zello to zoiper and cross the cables. Works slicker than sh*t! 
> > Obviously your zoiper connection is left up full time. Also I password 
> > protect my channel.
> >
> > Feel free to connect to my node and I'll give you a demo.
> >
> > We have a regular user who is over the road trucker and zello plays nice 
> > with his blue parrot headset also much more "PTT radio like" friendly. 
> > Also I can record repeater activity too!
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 
> > <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll 
> > down to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down 
> > to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message to 
> > the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141114/244a0c78/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 26
> *********************************************
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4189/8571 - Release Date: 11/14/14 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/3268a8a6/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 69, Issue 28
*********************************************


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/e2b83e87/attachment.html>

From Bryan at bryanfields.net  Sun Nov 16 02:59:24 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Sat, 15 Nov 2014 21:59:24 -0500
Subject: [App_rpt-users] Show link topology from cli?
Message-ID: <5468130C.1020801@bryanfields.net>

Is there an easy to see interconnected link topology database via the CLI?

73's

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net



From doug at crompton.com  Sun Nov 16 06:11:29 2014
From: doug at crompton.com (Doug Crompton)
Date: Sun, 16 Nov 2014 01:11:29 -0500
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <5468130C.1020801@bryanfields.net>
References: <5468130C.1020801@bryanfields.net>
Message-ID: <BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>

I am not sure this is exactly what you want but if you want to see what a node is connected to along with information on each node 'lsnodes' will do that to any node via the web. It is built into the BBB. All you need to do is route port 80 (or whatever port you have the http servr on) and access the node with a web browser.  Locally you can do it without forwarding a port.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Sat, 15 Nov 2014 21:59:24 -0500
> From: Bryan at bryanfields.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Show link topology from cli?
> 
> Is there an easy to see interconnected link topology database via the CLI?
> 
> 73's
> 
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/fda875cb/attachment.html>

From petem001 at hotmail.com  Sun Nov 16 16:13:15 2014
From: petem001 at hotmail.com (pete M)
Date: Sun, 16 Nov 2014 11:13:15 -0500
Subject: [App_rpt-users] good connection to URI?
Message-ID: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>

Hi guys.. 
ast week i did a harness to hook my tkr-750 ver 2 to a URI
here is what I did:
tkr-750 pin ----- uri
8 to 22 (ctcss tone to tkr)9 to 26 (voice to tkr)10 to 21 (audio to uri)12 to 19 (ground)16 to 1 (ptt)17 to 8 (cor)
I dont need the cor cause I want to do all the signaling by dsp but still hoocked it up in case..
So does this make sens? cause I cant have the ctcss level right.
I try to switch the ctcss and voice from left to right in case I had reverse the wiring.put both channel as tone and voice to test. no go I cant send ctcss from the URI.
I know I can send it from the repeater itself.. But I want to control when it is sent.
Thanks for taking the time to help me ;-)



 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/17f88909/attachment.html>

From Bryan at bryanfields.net  Sun Nov 16 16:43:29 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Sun, 16 Nov 2014 11:43:29 -0500
Subject: [App_rpt-users] non SSL access to allstarlink.org
Message-ID: <5468D431.2090009@bryanfields.net>

Is there a url I can use to access this that does not redirect to the SSL server?

Thank you,

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net



From telesistant at hotmail.com  Sun Nov 16 16:54:10 2014
From: telesistant at hotmail.com (Jim Duuuude)
Date: Sun, 16 Nov 2014 08:54:10 -0800
Subject: [App_rpt-users] non SSL access to allstarlink.org
In-Reply-To: <5468D431.2090009@bryanfields.net>
References: <5468D431.2090009@bryanfields.net>
Message-ID: <BLU180-W5579453DB1324C40EDDE8CB18A0@phx.gbl>

No, why?

> Date: Sun, 16 Nov 2014 11:43:29 -0500
> From: Bryan at bryanfields.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] non SSL access to allstarlink.org
> 
> Is there a url I can use to access this that does not redirect to the SSL server?
> 
> Thank you,
> 
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/3e2a76f3/attachment.html>

From bryan at bryanfields.net  Sun Nov 16 16:56:36 2014
From: bryan at bryanfields.net (Bryan Fields)
Date: Sun, 16 Nov 2014 11:56:36 -0500
Subject: [App_rpt-users] non SSL access to allstarlink.org
In-Reply-To: <WM!fae9c83b74e6d36cd80dde43e2bdb4e37a33d2ab8478f8daae3b86cf87d2495c7219678cdd6e17ca1d74fd1345c47ecb!@asav-3.01.com>
References: <5468D431.2090009@bryanfields.net>
	<BLU180-W5579453DB1324C40EDDE8CB18A0@phx.gbl>
	<WM!fae9c83b74e6d36cd80dde43e2bdb4e37a33d2ab8478f8daae3b86cf87d2495c7219678cdd6e17ca1d74fd1345c47ecb!@asav-3.01.com>
Message-ID: <fc5a77a3-b4ab-4aef-b90c-68d13633dc23@email.android.com>

We can't do encryption over amateur radio, so when accessing it from my ham radio 3400 mhz network it's technically a rule violation. 

On November 16, 2014 11:54:10 AM EST, Jim Duuuude <telesistant at hotmail.com> wrote:
>No, why?
>
>> Date: Sun, 16 Nov 2014 11:43:29 -0500
>> From: Bryan at bryanfields.net
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] non SSL access to allstarlink.org
>> 
>> Is there a url I can use to access this that does not redirect to the
>SSL server?
>> 
>> Thank you,
>> 
>> -- 
>> Bryan Fields
>> 
>> 727-409-1194 - Voice
>> 727-214-2508 - Fax
>> http://bryanfields.net
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem. 
> 		 	   		  

--
Bryan Fields
727-409-1194
http://bryanfields.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/a86b8517/attachment.html>

From kc7mrq at bresnan.net  Sun Nov 16 21:25:22 2014
From: kc7mrq at bresnan.net (Corey)
Date: Sun, 16 Nov 2014 14:25:22 -0700
Subject: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 27
In-Reply-To: <mailman.2325.1416034298.369.app_rpt-users@ohnosec.org>
References: <mailman.2325.1416034298.369.app_rpt-users@ohnosec.org>
Message-ID: <54691642.8060009@bresnan.net>

Chuck,
I fixed all my issues. I didn't realize the difference between a NMEA & 
Garmin sentence. I deselected all sentences that started with "P" in the 
SNSRCFG program, reloaded the GPS file, and my warning went away.
I was able to update the firmware with your advice.


Thanks again for your help,

Corey






On 11/14/2014 11:51 PM, app_rpt-users-request at ohnosec.org wrote:
> Send App_rpt-users mailing list submissions to
> 	app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> 	app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
> 	app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>     1. Re: EchoLink Policy Reminder (Johnny Keeker)
>     2. Voter board (Corey)
>     3. Re: Voter board (Chuck Henderson)
>     4. Re: Voter board (Chuck Henderson)
>     5. Re: Voter board (Chuck Henderson)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 14 Nov 2014 14:44:54 -0800
> From: Johnny Keeker <cypresstower at yahoo.com>
> To: kk6ecm <kk6ecm at gmail.com>, Kirk Just Kirk <wb6egr at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] EchoLink Policy Reminder
> Message-ID:
> 	<1416005094.33956.YahooMailBasic at web163604.mail.gq1.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> When they kill our accounts we'll say EchoStink Stunk
> --------------------------------------------
> On Tue, 11/11/14, Kirk Just Kirk <wb6egr at gmail.com> wrote:
>
>   Subject: Re: [App_rpt-users] EchoLink Policy Reminder
>   To: "kk6ecm" <kk6ecm at gmail.com>
>   Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
>   Date: Tuesday, November 11, 2014, 7:08 PM
>   
>   They can
>   close/kill my account anytime. EchoStink sounds horrible
>   most of the time...constant drivebys from dingalings that
>   connect and disconnect over and over and say nothing...or
>   connect at 3 in the morning and call CQ CQ. For 5
>   minutes.....I am so tired of that shit I could delete it
>   tonight.
>   
>   
>   On Nov 11, 2014 2:00
>   PM, "kk6ecm" <kk6ecm at gmail.com>
>   wrote:
>   Can anyone shed light
>   on this Echolink requirement and Allstar? I'm not sure
>   what makes us compliant. We have Echolink enabled on our
>   repeater... I know of no way a non-ham could link in during
>   an Echolink connection. Is there a way of setting app_rpt so
>   an Echolink connection precludes all others? Also, Echolink
>   has Apps for the PC, Android, and the iPhone/iPad... Their
>   PC app (phones are RF, but not ham) seems to invalidate
>   their rf only policy, although they do verify a license
>   before granting a node number. What am I missing?
>   
>   Thanks,Bobkk6ecm
>   Sent from iPad
>   
>   ---------- Forwarded
>   message ----------
>   From: EchoLink Support
>   <support at echolink.org>
>   Date: Wed, Sep 3, 2014 at 9:14 AM
>   Subject: EchoLink Policy Reminder
>   To:
>   
>   
>   We wanted to remind you of an important item in
>   EchoLink's access policies (which can be found online at
>   http://www.echolink.org/access_policies.htm).
>   
>   
>   
>   In general, EchoLink does not permit cross-linking.
>   
>   
>   
>   More specifically, EchoLink does not permit cross-linking
>   with other VoIP systems that can be accessed off-the-air
>   (for example, directly from a PC or Web browser).? This is
>   because other systems may have a validation procedure that
>   is far less comprehensive than EchoLink's, and we want
>   to continue to ensure that EchoLink is solely for use by
>   licensed Amateur Radio operators around the world.
>   
>   
>   
>   Therefore, while excellent systems such as Zello, AllStar,
>   eQSO, WIRES-II, etc. all serve an important purpose within
>   the Amateur Radio community, our policy is that they cannot
>   be directly connected to a registered EchoLink node.
>   
>   
>   
>   In other words, your node must function only as a direct RF
>   gateway, and not as a cross-link to another system. If your
>   node is reachable through another path, that path must be
>   disabled when an EchoLink connection is in progress. For
>   example, an EchoIRLP node is permitted, since it functions
>   only as an RF gateway when an EchoLink connection is
>   made.
>   
>   
>   
>   If you are running Asterisk with app_rpt and an EchoLink
>   channel, be sure it is configured not to allow other VoIP
>   connections when an EchoLink station is connected. If this
>   isn't practical, please disable the EchoLink channel.
>   
>   
>   
>   Thanks for ensuring that your node adheres to this policy.
>   In some cases we do restrict logins to be sure the policy is
>   being followed.
>   
>   
>   
>   73
>   
>   EchoLink Support
>   
>   
>   
>   (Note: This mailbox is not able to handle replies. For help
>   and information, please see www.echolink.org/support.htm)
>   
>   
>   
>   
>   _______________________________________________
>   
>   App_rpt-users mailing list
>   
>   App_rpt-users at ohnosec.org
>   
>   http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>   
>   
>   
>   To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>   and scroll down to the bottom of the page. Enter your email
>   address and press the "Unsubscribe or edit options
>   button"
>   
>   You do not need a password to unsubscribe, you can do it via
>   email confirmation. If you have trouble unsubscribing,
>   please send a message to the list detailing the problem.
>   
>   -----Inline Attachment Follows-----
>   
>   _______________________________________________
>   App_rpt-users mailing list
>   App_rpt-users at ohnosec.org
>   http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>   
>   To unsubscribe from this list
>   please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>   and scroll down to the bottom of the page. Enter your
>   email address and press the "Unsubscribe or edit
>   options button"
>   You do not need a
>   password to unsubscribe, you can do it via email
>   confirmation. If you have trouble unsubscribing, please send
>   a message to the list detailing the problem.
>   
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 14 Nov 2014 23:10:57 -0700
> From: Corey <kc7mrq at bresnan.net>
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Voter board
> Message-ID: <5466EE71.1090107 at bresnan.net>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> I built a through hole voter board and interfaced it to a GPS 18 LVC and
> my server. I set the board up as a master, transmit. The LED shows the
> GPS locked and 98 command shows the GPS,
> but I am getting the following error when telnetting into the board:
>
> Warning: GPS Data time period elapsed.
>
> The error is timestamped and occurs every second. I made sure the data
> format was NMEA per archived messages on here by connecting the GPS to
> SNSRCFG. The config appears to be set up correctly.
> What other areas do I need to look at to fix this warning?
>
> I did notice you can choose quite a few NMEA messages in the SNSRCFG
> profile. Does it matter if all are checked?
>
> I have a second issue with updating the firmware. The board is at Rev
> 1.41. I tried updating it, but haven't had any luck so far. Nothing
> happens when I click on the "capture target" button after resetting the
> voter board. The target ip is the voter board and the bootloader ip in
> the voter is my laptop with ENC_Loader.
>
>    The IC(s) were originally programmed by a friend in another state so I
> never experienced what it take to do the initial programming.
>
>
> Thanks for your help,
> Corey
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 15 Nov 2014 00:27:46 -0600
> From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
> To: Corey <kc7mrq at bresnan.net>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Voter board
> Message-ID:
> 	<CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> set the bootloader IP to be the same as the voter board IP, or make it
> different than anything else on the network.  It is the IP that the voter
> board uses when it is running the bootloader code.  It can not have the
> same IP as your laptop.  That will not work.
>
> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>
>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>> my server. I set the board up as a master, transmit. The LED shows the GPS
>> locked and 98 command shows the GPS,
>> but I am getting the following error when telnetting into the board:
>>
>> Warning: GPS Data time period elapsed.
>>
>> The error is timestamped and occurs every second. I made sure the data
>> format was NMEA per archived messages on here by connecting the GPS to
>> SNSRCFG. The config appears to be set up correctly.
>> What other areas do I need to look at to fix this warning?
>>
>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>> profile. Does it matter if all are checked?
>>
>> I have a second issue with updating the firmware. The board is at Rev
>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>> when I click on the "capture target" button after resetting the voter
>> board. The target ip is the voter board and the bootloader ip in the voter
>> is my laptop with ENC_Loader.
>>
>>   The IC(s) were originally programmed by a friend in another state so I
>> never experienced what it take to do the initial programming.
>>
>>
>> Thanks for your help,
>> Corey
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
>> Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/67ae2ac4/attachment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 15 Nov 2014 00:36:19 -0600
> From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
> To: Corey <kc7mrq at bresnan.net>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Voter board
> Message-ID:
> 	<CADEYVwiA4V6dkUSOhyNHFfOgor4yaKhojp9HweNzkJByNCutcw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> An easy error is having the TX and RX swapped where you connect the GPS to
> the voter board. Try it the other way.
>
> On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson <
> rpt2 at chuck.midlandsnetworking.com> wrote:
>
>> set the bootloader IP to be the same as the voter board IP, or make it
>> different than anything else on the network.  It is the IP that the voter
>> board uses when it is running the bootloader code.  It can not have the
>> same IP as your laptop.  That will not work.
>>
>> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>>
>>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>>> my server. I set the board up as a master, transmit. The LED shows the GPS
>>> locked and 98 command shows the GPS,
>>> but I am getting the following error when telnetting into the board:
>>>
>>> Warning: GPS Data time period elapsed.
>>>
>>> The error is timestamped and occurs every second. I made sure the data
>>> format was NMEA per archived messages on here by connecting the GPS to
>>> SNSRCFG. The config appears to be set up correctly.
>>> What other areas do I need to look at to fix this warning?
>>>
>>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>>> profile. Does it matter if all are checked?
>>>
>>> I have a second issue with updating the firmware. The board is at Rev
>>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>>> when I click on the "capture target" button after resetting the voter
>>> board. The target ip is the voter board and the bootloader ip in the voter
>>> is my laptop with ENC_Loader.
>>>
>>>   The IC(s) were originally programmed by a friend in another state so I
>>> never experienced what it take to do the initial programming.
>>>
>>>
>>> Thanks for your help,
>>> Corey
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>>> page. Enter your email address and press the "Unsubscribe or edit options
>>> button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/853a9207/attachment-0001.html>
>
> ------------------------------
>
> Message: 5
> Date: Sat, 15 Nov 2014 00:51:05 -0600
> From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
> To: Corey <kc7mrq at bresnan.net>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Voter board
> Message-ID:
> 	<CADEYVwh47howqRH1Ls++GhxryFd1QbYWDLZ3gufhSVhT2s9mtg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I should be asleep, or maybe I am.  I just re-read your message and now I
> see you said that you do have GPS lock so ignore what I said about TX and
> RX.
> If you only have that problem when you telnet into the board, I have seen
> that when I have a poor quality network connection between the pc and the
> voter board.  I think that the board gets too busy with re-sending on the
> ethernet and then has trouble reading the serial port data from the GPS.
> If they are on the same LAN then use a switch instead of a hub and make
> sure that duplex is correct for everything on the LAN segment.  Also make
> sure that your netmask is set correctly (the same) on everything on the LAN.
> Also just go with the default NEMA messages, you do not need any other than
> the default.
>
> On Sat, Nov 15, 2014 at 12:36 AM, Chuck Henderson <
> rpt2 at chuck.midlandsnetworking.com> wrote:
>
>> An easy error is having the TX and RX swapped where you connect the GPS to
>> the voter board. Try it the other way.
>>
>> On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson <
>> rpt2 at chuck.midlandsnetworking.com> wrote:
>>
>>> set the bootloader IP to be the same as the voter board IP, or make it
>>> different than anything else on the network.  It is the IP that the voter
>>> board uses when it is running the bootloader code.  It can not have the
>>> same IP as your laptop.  That will not work.
>>>
>>> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>>>
>>>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>>>> my server. I set the board up as a master, transmit. The LED shows the GPS
>>>> locked and 98 command shows the GPS,
>>>> but I am getting the following error when telnetting into the board:
>>>>
>>>> Warning: GPS Data time period elapsed.
>>>>
>>>> The error is timestamped and occurs every second. I made sure the data
>>>> format was NMEA per archived messages on here by connecting the GPS to
>>>> SNSRCFG. The config appears to be set up correctly.
>>>> What other areas do I need to look at to fix this warning?
>>>>
>>>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>>>> profile. Does it matter if all are checked?
>>>>
>>>> I have a second issue with updating the firmware. The board is at Rev
>>>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>>>> when I click on the "capture target" button after resetting the voter
>>>> board. The target ip is the voter board and the bootloader ip in the voter
>>>> is my laptop with ENC_Loader.
>>>>
>>>>   The IC(s) were originally programmed by a friend in another state so I
>>>> never experienced what it take to do the initial programming.
>>>>
>>>>
>>>> Thanks for your help,
>>>> Corey
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>>>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>>>> page. Enter your email address and press the "Unsubscribe or edit options
>>>> button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>
>>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141115/70101ed6/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 69, Issue 27
> *********************************************
>



From electricity440 at gmail.com  Sun Nov 16 23:36:07 2014
From: electricity440 at gmail.com (Skyler F)
Date: Sun, 16 Nov 2014 16:36:07 -0700
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <887B641F-4306-4381-9081-763B59919873@mac.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
	<CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
	<BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>
	<887B641F-4306-4381-9081-763B59919873@mac.com>
Message-ID: <CAJNyT082qFge125hnQLJGBSWZ25oabOpqgWJQw8Oe_08-FN-Ng@mail.gmail.com>

I forwarded the port 5038, and ran everything from the readme, but it still
says "waiting" under node information, and will not connect.

See here:

http://kd0whb.duckdns.org/allmon-allmon2/link.php?nodes=40764

On the Readme, there was also a line that said to "Edit
/etc/asterisk/manager.conf", but nothing after that, is there something
that I should do in manager.conf?

73
Skyler KD?WHB



On Thu, Nov 13, 2014 at 10:14 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> ARRG? auto correct. That filename should be allmon.ini.php
> --
> Tim
> :wq
>
> On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
> Allmon 2 changed the ini filename to almond.ini.php
> --
> Tim
> :wq
>
> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com> wrote:
>
> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to
> allmon.ini. It still says "could not load allmon.ini" though, unlike with
> allmon 1.
>
> Do I need to forward port 5038 to work? And where it says to use "
> yourhost.com", I have a dynamic dns server kd0whb.duckdns.org, is that
> what I should use? Is the username root and password the password to login
> to the node?
>
> Skyler KD?WHB
>
> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net> wrote:
>
>> I second this...  I have wanted to see this work for some time now but as
>> stated it only does the commands and doesn't show the connected nodes.  I
>> really wish it did as I use the xipar voting and that would be great to see
>> on allmon or something similar...
>>
>> Corey N3FE
>>
>> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com> wrote:
>>
>> I could not get Allmon to work with Xipar. You are able to connect and
>> disconnect nodes but it will not populate the table with information on
>> what nodes are connected. However, if there is anyone out there who has
>> managed to get it working I would also like to know how!
>>
>> Thanks
>> Steve
>> M0HOY
>>
>>
>>
>>
>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>
>> I think it will work with Xipar as it?s merely an Asterisk Manager
>> Interface client. Maybe someone here on the list can confirm.
>> --
>> Tim
>> :wq
>>
>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net> wrote:
>>
>> Tim
>> Will this work with xipar nodes?
>>
>> Lu Vencl
>>
>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>
>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
>> --
>> Tim
>> :wq
>>
>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net> wrote:
>>
>> So where is allmon v2 being hosted?
>>
>> Thanks & 73,
>> Scott KB2EAR
>>
>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
>  _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>


-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/43500a4a/attachment.html>

From electricity440 at gmail.com  Sun Nov 16 23:36:49 2014
From: electricity440 at gmail.com (Skyler F)
Date: Sun, 16 Nov 2014 16:36:49 -0700
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <CAJNyT082qFge125hnQLJGBSWZ25oabOpqgWJQw8Oe_08-FN-Ng@mail.gmail.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
	<CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
	<BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>
	<887B641F-4306-4381-9081-763B59919873@mac.com>
	<CAJNyT082qFge125hnQLJGBSWZ25oabOpqgWJQw8Oe_08-FN-Ng@mail.gmail.com>
Message-ID: <CAJNyT08sHxUCR+_63KmYMk8-e5zZBSJyduxDRtyAVw0_ReX6XA@mail.gmail.com>

wrong link, it is http://kd0whb.duckdns.org/allmon/link.php?nodes=40764



On Sun, Nov 16, 2014 at 4:36 PM, Skyler F <electricity440 at gmail.com> wrote:

> I forwarded the port 5038, and ran everything from the readme, but it
> still says "waiting" under node information, and will not connect.
>
> See here:
>
> http://kd0whb.duckdns.org/allmon-allmon2/link.php?nodes=40764
>
> On the Readme, there was also a line that said to "Edit
> /etc/asterisk/manager.conf", but nothing after that, is there something
> that I should do in manager.conf?
>
> 73
> Skyler KD?WHB
>
>
>
> On Thu, Nov 13, 2014 at 10:14 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
>> ARRG? auto correct. That filename should be allmon.ini.php
>> --
>> Tim
>> :wq
>>
>> On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>
>> Allmon 2 changed the ini filename to almond.ini.php
>> --
>> Tim
>> :wq
>>
>> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com> wrote:
>>
>> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt
>> to allmon.ini. It still says "could not load allmon.ini" though, unlike
>> with allmon 1.
>>
>> Do I need to forward port 5038 to work? And where it says to use "
>> yourhost.com", I have a dynamic dns server kd0whb.duckdns.org, is that
>> what I should use? Is the username root and password the password to login
>> to the node?
>>
>> Skyler KD?WHB
>>
>> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net> wrote:
>>
>>> I second this...  I have wanted to see this work for some time now but
>>> as stated it only does the commands and doesn't show the connected nodes.
>>> I really wish it did as I use the xipar voting and that would be great to
>>> see on allmon or something similar...
>>>
>>> Corey N3FE
>>>
>>> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com> wrote:
>>>
>>> I could not get Allmon to work with Xipar. You are able to connect and
>>> disconnect nodes but it will not populate the table with information on
>>> what nodes are connected. However, if there is anyone out there who has
>>> managed to get it working I would also like to know how!
>>>
>>> Thanks
>>> Steve
>>> M0HOY
>>>
>>>
>>>
>>>
>>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>>
>>> I think it will work with Xipar as it?s merely an Asterisk Manager
>>> Interface client. Maybe someone here on the list can confirm.
>>> --
>>> Tim
>>> :wq
>>>
>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net> wrote:
>>>
>>> Tim
>>> Will this work with xipar nodes?
>>>
>>> Lu Vencl
>>>
>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>>
>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2
>>> --
>>> Tim
>>> :wq
>>>
>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net> wrote:
>>>
>>> So where is allmon v2 being hosted?
>>>
>>> Thanks & 73,
>>> Scott KB2EAR
>>>
>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KD?WHB
>> electricity440 at gmail.com
>>  _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/4d397619/attachment.html>

From tim.sawyer at mac.com  Mon Nov 17 00:28:53 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Sun, 16 Nov 2014 16:28:53 -0800
Subject: [App_rpt-users] How to setup Allstar Monitor
In-Reply-To: <CAJNyT08sHxUCR+_63KmYMk8-e5zZBSJyduxDRtyAVw0_ReX6XA@mail.gmail.com>
References: <CAJNyT08OE=uGZSXZK7U1hN6711d_+__DrDfyLf3rsSydTtE77g@mail.gmail.com>
	<0B2CE537-4C2C-4495-9C32-EDAF7847E6A0@mac.com>
	<b3a8e8cd80b330a2c93b350b1c19cc31@mail.kb2ear.net>
	<B014A75A-ABDB-4BDB-8CF4-8C2DB78C6528@mac.com>
	<8679C199-BA78-4D6F-A980-4C83D91A8A39@att.net>
	<0977DD87-D6FD-4193-8507-8D76422F1ED4@mac.com>
	<99F37503-9D5A-468A-A786-BDE1F31F5491@m0hoy.com>
	<C9514732-C18C-4098-B756-702B9D3A1C8E@repeater.net>
	<CAJNyT0_dCaTnZ2Cf6Ue8PqfC2=0J_+eHtJZskmHOfWD065NS2g@mail.gmail.com>
	<BB9F8491-779E-47F7-AF21-C470C788823C@mac.com>
	<887B641F-4306-4381-9081-763B59919873@mac.com>
	<CAJNyT082qFge125hnQLJGBSWZ25oabOpqgWJQw8Oe_08-FN-Ng@mail.gmail.com>
	<CAJNyT08sHxUCR+_63KmYMk8-e5zZBSJyduxDRtyAVw0_ReX6XA@mail.gmail.com>
Message-ID: <841EC0D2-23D4-4272-A302-F1C9461BB8DE@mac.com>

Yes you have to edit your manager.conf 

; Choose one
bindaddr = 0.0.0.0   ; wide open - your Allmon server at any IP. 
;bindaddr = 127.0.0.1 ; if Allmon web server is running on localhost. 
;bindaddr = 10.10.10.10 ; Or your web server IP.
                                                                            
; Allmon user ID is admin or whatever you want to make [yourID]. must match allmon.ini.php    
[admin]                                                                         
secret = y0urSecr3t3-Passw0rd_W1thNumbe3rsAndStu44 ; must match allmon.ini.php
  
--
Tim
:wq

> On Nov 16, 2014, at 3:36 PM, Skyler F <electricity440 at gmail.com> wrote:
> 
> wrong link, it is http://kd0whb.duckdns.org/allmon/link.php?nodes=40764 <http://kd0whb.duckdns.org/allmon/link.php?nodes=40764>
> 
> 
> 
> On Sun, Nov 16, 2014 at 4:36 PM, Skyler F <electricity440 at gmail.com <mailto:electricity440 at gmail.com>> wrote:
> I forwarded the port 5038, and ran everything from the readme, but it still says "waiting" under node information, and will not connect. 
> 
> See here: 
> 
> http://kd0whb.duckdns.org/allmon-allmon2/link.php?nodes=40764 <http://kd0whb.duckdns.org/allmon-allmon2/link.php?nodes=40764>
> 
> On the Readme, there was also a line that said to "Edit /etc/asterisk/manager.conf", but nothing after that, is there something that I should do in manager.conf?
> 
> 73
> Skyler KD?WHB
> 
> 
> 
> On Thu, Nov 13, 2014 at 10:14 AM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
> ARRG? auto correct. That filename should be allmon.ini.php
> --
> Tim
> :wq
> 
>> On Nov 13, 2014, at 9:13 AM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>> 
>> Allmon 2 changed the ini filename to almond.ini.php
>> --
>> Tim
>> :wq
>> 
>>> On Nov 13, 2014, at 7:56 AM, Skyler F <electricity440 at gmail.com <mailto:electricity440 at gmail.com>> wrote:
>>> 
>>> Ok, so I put the allmon-2 folder and ran it, and renamed allmon.ini.txt to allmon.ini. It still says "could not load allmon.ini" though, unlike with allmon 1.
>>> 
>>> Do I need to forward port 5038 to work? And where it says to use "yourhost.com <http://yourhost.com/>", I have a dynamic dns server kd0whb.duckdns.org <http://kd0whb.duckdns.org/>, is that what I should use? Is the username root and password the password to login to the node?
>>> 
>>> Skyler KD?WHB
>>> 
>>> On Wed, Nov 12, 2014 at 4:35 PM, Corey Dean <n3fe at repeater.net <mailto:n3fe at repeater.net>> wrote:
>>> I second this...  I have wanted to see this work for some time now but as stated it only does the commands and doesn't show the connected nodes.  I really wish it did as I use the xipar voting and that would be great to see on allmon or something similar...
>>> 
>>> Corey N3FE
>>> 
>>> On Nov 12, 2014, at 6:16 PM, Stephen Curtis <steve at m0hoy.com <mailto:steve at m0hoy.com>> wrote:
>>> 
>>>> I could not get Allmon to work with Xipar. You are able to connect and disconnect nodes but it will not populate the table with information on what nodes are connected. However, if there is anyone out there who has managed to get it working I would also like to know how!
>>>> 
>>>> Thanks
>>>> Steve 
>>>> M0HOY
>>>> 
>>>> 
>>>> 
>>>> 
>>>>> On 12 Nov 2014, at 22:15, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>>> 
>>>>> I think it will work with Xipar as it?s merely an Asterisk Manager Interface client. Maybe someone here on the list can confirm. 
>>>>> --
>>>>> Tim
>>>>> :wq
>>>>> 
>>>>>> On Nov 12, 2014, at 2:05 PM, Lu Vencl <vencl at att.net <mailto:vencl at att.net>> wrote:
>>>>>> 
>>>>>> Tim
>>>>>> Will this work with xipar nodes?
>>>>>> 
>>>>>> Lu Vencl
>>>>>> 
>>>>>> On Nov 12, 2014, at 3:09 PM, Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>> wrote:
>>>>>> 
>>>>>>> Allmon 2 is hosted here https://github.com/tsawyer/allmon/tree/allmon2 <https://github.com/tsawyer/allmon/tree/allmon2>
>>>>>>> --
>>>>>>> Tim
>>>>>>> :wq
>>>>>>> 
>>>>>>>> On Nov 12, 2014, at 11:58 AM, Scott Weis <kb2ear at kb2ear.net <mailto:kb2ear at kb2ear.net>> wrote:
>>>>>>>> 
>>>>>>>> So where is allmon v2 being hosted?
>>>>>>>> 
>>>>>>>> Thanks & 73,
>>>>>>>> Scott KB2EAR
>>>>>>>> 
>>>>>>>> On 2014-11-12 09:25, Tim Sawyer wrote:
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>>>>> 
>>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> 
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>>> 
>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>> 
>>> 
>>> 
>>> -- 
>>> Skyler Fennell
>>> amsatnet.info <http://amsatnet.info/>
>>> KD?WHB
>>> electricity440 at gmail.com <mailto:electricity440 at gmail.com>_______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
> 
> 
> 
> 
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info/>
> KD?WHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
> 
> 
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info/>
> KD?WHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/638d7ab3/attachment.html>

From saliksatti at yahoo.com  Mon Nov 17 02:37:19 2014
From: saliksatti at yahoo.com (Salik Satti)
Date: Mon, 17 Nov 2014 02:37:19 +0000 (UTC)
Subject: [App_rpt-users] Installation And configuration of URIs with
 asterisk app_rpt
In-Reply-To: <BLU172-W505AE5FDB2E52FC2E195F3BA8C0@phx.gbl>
References: <BLU172-W505AE5FDB2E52FC2E195F3BA8C0@phx.gbl>
Message-ID: <820642829.878792.1416191839973.JavaMail.yahoo@jws10037.mail.ne1.yahoo.com>

HI,???? I have installed the Node with ACID and test it using the iAXRPT software. There are my some questions:
1) As PTT control for iaxrpt is using the Ctrl button. when i pressed and then release the Ctrl button there is a delay in between i mean red light on URIx (delay in going red and the off). 

2) As it runs with asterisk. Can i call from normal softphone or ip Phone (i.e: IP Phone) Using SIP standard to the Node connected with iax RPT. Is that possible.
3) Or what is the basic purpose of this node setup. Is that only for use repeater mode?
Kindly i am bit confused about this. I will be grateful if anyone can answer to my questions.
Regards,?Salik Mumtaz Satti, A-EXEN
National Radio And Telecommunication Corporation, Haripur Pakistan 
www.nrtc.com.pk
salik.satti at nrtc.com.pk
Contact: +923155414048
Skype: salik.satti6

 

     On Friday, November 14, 2014 1:01 AM, Doug Crompton <doug at crompton.com> wrote:
   

 #yiv2686584581 #yiv2686584581 --.yiv2686584581hmmessage P{margin:0px;padding:0px;}#yiv2686584581 body.yiv2686584581hmmessage{font-size:12pt;font-family:Calibri;}#yiv2686584581 Salik,

? I think you need to give us more information. What kind of problems are you having? Is it just with the DMK URI or Allstar in general?

The DMK URI's green LED should light up at boot and if you type at the Linux prompt 'lsusb' you should see it listed. That would be your first step. It should look like this. The C-media device is the DMK URI. You may have other USB devices present also.

[root at WA3DSP_Allstar ~]# lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0d8c:013a C-Media Electronics, Inc.
Bus 002 Device 001: ID 0000:0000

If that seems OK then when you start Asterisk and everything is configured properly the green LED should blink at about a 2pps rate.

As far as your node is concerned, have you received a node number and password from allstarlink.org?

If you have questions about the configuration files I am sure someone here could help you.

Also have you considered using the Beagle Bone Black for your node? I am not sure if that is available in your country or how easy it is to get but it is much easier to setup and use. If you had all the hardware you could have it setup and running in 10 minutes or less. The DMK URI would be the most expensive item and you already have that. You can view the web page at:

hamvoip.org
?
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Fri, 14 Nov 2014 04:27:35 +0000
From: saliksatti at yahoo.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Installation And configuration of URIs with asterisk app_rpt

Hi All,????????? I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance.
?Salik Mumtaz Satti, A-EXEN
National Radio And Telecommunication Corporation, Haripur Pakistan 
www.nrtc.com.pk
salik.satti at nrtc.com.pk
Contact: +923155414048
Skype: salik.satti6


_______________________________________________App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-usersTo unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/cbad0cfa/attachment.html>

From Ramesh at va3uv.com  Mon Nov 17 03:11:51 2014
From: Ramesh at va3uv.com (Ramesh Dhami (VA3UV))
Date: Sun, 16 Nov 2014 22:11:51 -0500
Subject: [App_rpt-users] good connection to URI?
In-Reply-To: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>
References: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>
Message-ID: <54696777.3030003@va3uv.com>

Hi Pierre:

Try this:

TKR 850     URI

8           23
9           22
10          21
16           1
25           8


This is per my external MUX and how I have my 850 setup for dual mode 
(DV and FM).

Note, you will need to configure the usbradio.conf file appropriately to 
send the tone out on the RIGHT channel and the Audio out on the LEFT 
channel.

Let me know how it goes!

Ramesh.


On 16/11/2014 11:13 AM, pete M wrote:
> Hi guys..
>
> ast week i did a harness to hook my tkr-750 ver 2 to a URI
>
> here is what I did:
>
> tkr-750 pin ----- uri
>
> 8 to 22 (ctcss tone to tkr)
> 9 to 26 (voice to tkr)
> 10 to 21 (audio to uri)
> 12 to 19 (ground)
> 16 to 1 (ptt)
> 17 to 8 (cor)
>
> I dont need the cor cause I want to do all the signaling by dsp but
> still hoocked it up in case..
>
> So does this make sens? cause I cant have the ctcss level right.
>
> I try to switch the ctcss and voice from left to right in case I had
> reverse the wiring.
> put both channel as tone and voice to test. no go I cant send ctcss from
> the URI.
>
> I know I can send it from the repeater itself.. But I want to control
> when it is sent.
>
> Thanks for taking the time to help me ;-)
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>



From Ramesh at va3uv.com  Mon Nov 17 03:19:34 2014
From: Ramesh at va3uv.com (Ramesh Dhami (VA3UV))
Date: Sun, 16 Nov 2014 22:19:34 -0500
Subject: [App_rpt-users] good connection to URI?
In-Reply-To: <54696777.3030003@va3uv.com>
References: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>
	<54696777.3030003@va3uv.com>
Message-ID: <54696946.5020500@va3uv.com>

On 16/11/2014 10:11 PM, Ramesh Dhami (VA3UV) wrote:
> Hi Pierre:
>
> Try this:
>
> TKR 850     URI
>
> 8           23
> 9           22
> 10          21
> 16           1
> 25           8
>
<-- don't forget the ground connection (see my drawing - how I connect 
audio ground and shields).

R.


From Bryan at bryanfields.net  Mon Nov 17 04:24:13 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Sun, 16 Nov 2014 23:24:13 -0500
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>
References: <5468130C.1020801@bryanfields.net>
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>
Message-ID: <5469786D.5080103@bryanfields.net>

On 11/16/14, 1:11 AM, Doug Crompton wrote:
> I am not sure this is exactly what you want but if you want to see what a node
> is connected to along with information on each node 'lsnodes' will do that to
> any node via the web. It is built into the BBB. All you need to do is route
> port 80 (or whatever port you have the http servr on) and access the node with
> a web browser.  Locally you can do it without forwarding a port.

I'm not running a web server or have a BBB(?).

I know there is a bubble map that the stats.allstarlink.org draws, but how can
I get this data out of asterisk directly?

I can figure out my directly connected neighbors, but how can I figure out
who's connected to them?

Think of it like looking at OSPF neighbors vs. looking at the OSPF database on
a router.  I want to see the database.

Thanks,
-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net


From tim.sawyer at mac.com  Mon Nov 17 04:50:14 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Sun, 16 Nov 2014 20:50:14 -0800
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <5469786D.5080103@bryanfields.net>
References: <5468130C.1020801@bryanfields.net>
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>
	<5469786D.5080103@bryanfields.net>
Message-ID: <3A637F6D-C7CA-4BAF-82CB-4F118DA90E95@mac.com>

I don?t know of a way to print that to the console. There is a command to speak it. Have a look at cop 15 (v. cop 5). The horrid thing about this it can take a long time to read back all the connect nodes on even a reasonably small network. And worse, it will read back on all nodes with telemetry enabled (not just your node). 

fyi, cop (and all other) commands are listed in the comments at the top of rpt.c


--
Tim
:wq

> On Nov 16, 2014, at 8:24 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
> I know there is a bubble map that the stats.allstarlink.org <http://stats.allstarlink.org/> draws, but how can
> I get this data out of asterisk directly?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: app_rpt_comments.pdf
Type: application/pdf
Size: 27674 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment.pdf>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/15f4ecc6/attachment-0001.html>

From tim.sawyer at mac.com  Mon Nov 17 04:55:49 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Sun, 16 Nov 2014 20:55:49 -0800
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <3A637F6D-C7CA-4BAF-82CB-4F118DA90E95@mac.com>
References: <5468130C.1020801@bryanfields.net>
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>
	<5469786D.5080103@bryanfields.net>
	<3A637F6D-C7CA-4BAF-82CB-4F118DA90E95@mac.com>
Message-ID: <0FE9EEEA-A08D-4971-AE20-07702BEBE90E@mac.com>

Correction: that ilink 15, not cop 15. Not that that is what you want, but just for the sake of correctness. 
--
Tim
:wq

> On Nov 16, 2014, at 8:50 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
> 
> I don?t know of a way to print that to the console. There is a command to speak it. Have a look at cop 15 (v. cop 5). The horrid thing about this it can take a long time to read back all the connect nodes on even a reasonably small network. And worse, it will read back on all nodes with telemetry enabled (not just your node). 
> 
> fyi, cop (and all other) commands are listed in the comments at the top of rpt.c
> 
> <app_rpt_comments.pdf>
> 
> --
> Tim
> :wq
> 
>> On Nov 16, 2014, at 8:24 PM, Bryan Fields <Bryan at bryanfields.net <mailto:Bryan at bryanfields.net>> wrote:
>> 
>> I know there is a bubble map that the stats.allstarlink.org <http://stats.allstarlink.org/> draws, but how can
>> I get this data out of asterisk directly?
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/e8ae38e8/attachment.html>

From doug at crompton.com  Mon Nov 17 05:04:14 2014
From: doug at crompton.com (Doug Crompton)
Date: Mon, 17 Nov 2014 00:04:14 -0500
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <5469786D.5080103@bryanfields.net>
References: <5468130C.1020801@bryanfields.net>
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>,
	<5469786D.5080103@bryanfields.net>
Message-ID: <BLU172-W11A99ADEA95B2FE4143F0FBA8B0@phx.gbl>

Bryan,

  The BBB is a single board Allstar implementation -  hamvoip.org

There is no way to get a local bubble map. This must be done through stats.allstarlink.org

Locally you can see the nodes you are connected to with the Asterisk CLI by doing -

rpt nodes <your-node_number>

To relate that to a database of what they are you would have to write some code. I have done this in the 'lsnodes' Perl script and as I said this is built-in to the BBB code. It also could be installed in the Acid code. Instructions are here -

 http://crompton.com/hamradio/allstar/lsnodes.html

If you wanted to do this yourself you would have to download the node call/QTH/Location database and cross it with the nodes you are connected to. This would give a nicely annotated list, as lsnodes does, of your connections. It would not however show a bubble map. lsnodes has a link to the bubble map to make it easy.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Sun, 16 Nov 2014 23:24:13 -0500
> From: Bryan at bryanfields.net
> To: doug at crompton.com; app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Show link topology from cli?
> 
> On 11/16/14, 1:11 AM, Doug Crompton wrote:
> > I am not sure this is exactly what you want but if you want to see what a node
> > is connected to along with information on each node 'lsnodes' will do that to
> > any node via the web. It is built into the BBB. All you need to do is route
> > port 80 (or whatever port you have the http servr on) and access the node with
> > a web browser.  Locally you can do it without forwarding a port.
> 
> I'm not running a web server or have a BBB(?).
> 
> I know there is a bubble map that the stats.allstarlink.org draws, but how can
> I get this data out of asterisk directly?
> 
> I can figure out my directly connected neighbors, but how can I figure out
> who's connected to them?
> 
> Think of it like looking at OSPF neighbors vs. looking at the OSPF database on
> a router.  I want to see the database.
> 
> Thanks,
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/5252d600/attachment.html>

From tim.sawyer at mac.com  Mon Nov 17 05:12:59 2014
From: tim.sawyer at mac.com (Tim Sawyer)
Date: Sun, 16 Nov 2014 21:12:59 -0800
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <BLU172-W11A99ADEA95B2FE4143F0FBA8B0@phx.gbl>
References: <5468130C.1020801@bryanfields.net>
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>
	<5469786D.5080103@bryanfields.net>
	<BLU172-W11A99ADEA95B2FE4143F0FBA8B0@phx.gbl>
Message-ID: <C7F7EA8A-A494-4341-B432-B87CA7165BBC@mac.com>

or with rpt lstats <your-node_number>

Allmon looks like this...


--
Tim
:wq

> On Nov 16, 2014, at 9:04 PM, Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>> wrote:
> 
> Locally you can see the nodes you are connected to with the Asterisk CLI by doing -
> 
> rpt nodes <your-node_number>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/9595a66e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2014-11-16 at 9.07.04 PM.png
Type: image/png
Size: 129078 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141116/9595a66e/attachment.png>

From doug at crompton.com  Mon Nov 17 05:49:52 2014
From: doug at crompton.com (Doug Crompton)
Date: Mon, 17 Nov 2014 00:49:52 -0500
Subject: [App_rpt-users] Installation And configuration of URIs with
 asterisk app_rpt
In-Reply-To: <820642829.878792.1416191839973.JavaMail.yahoo@jws10037.mail.ne1.yahoo.com>
References: <BLU172-W505AE5FDB2E52FC2E195F3BA8C0@phx.gbl>,
	<820642829.878792.1416191839973.JavaMail.yahoo@jws10037.mail.ne1.yahoo.com>
Message-ID: <BLU172-W440B0116261B8207EF741DBA8B0@phx.gbl>




Salik, see my answers below in your message.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Mon, 17 Nov 2014 02:37:19 +0000
From: saliksatti at yahoo.com
To: doug at crompton.com
CC: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Installation And configuration of URIs with asterisk app_rpt

HI,     I have installed the Node with ACID and test it using the iAXRPT software. There are my some questions:
1) As PTT control for iaxrpt is using the Ctrl button. when i pressed and then release the Ctrl button there is a delay in between i mean red light on URIx (delay in going red and the off). 

You did not say what the delay was. It should be in the millisecond range especially if it is on the same computer or network where you are running iaxrpt. Any excessive delay would probably be network delay but it also could be a really slow computer or miss-configured network. You should not be seeing delays of more than a second 

Tell us what the amount of delay is?


2) As it runs with asterisk. Can i call from normal softphone or ip Phone (i.e: IP Phone) Using SIP standard to the Node connected with iax RPT. Is that possible.

Asterisk is a PBX  so the SIP or IAX phone would directly connect to it. You would need to configure /etc/asterisk/sip.conf or iax.conf appropriately to do that. Every situation would be a little different. There are iphone and Android applications, like zopier - www.zoiper.com/ - that will allow you to connect to a server (your Asterisk Allstar) in either mode. Here is a sample of the iphone config code in the Beagle Bone Black. This would work the same in Acid. 

In iax.conf -

; Iphone IAX connection

[myiphone]
username=myiphone
type=friend
context=myphone
host=dynamic
auth=md5
; add a passsword of your selection for secret
secret=
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
; add your call or your selection for callerid
callerid=

in extensions.conf

(this shows two dummy nodes. Uncomment and replace with your node number)

; Iphone example

[myphone]
;exten=1998,1,rpt(1998|P)
;exten=1999,1,rpt(1999|P)

3) Or what is the basic purpose of this node setup. Is that only for use repeater mode?
I am not sure what your goal is with your system. I think you are connecting a radio? If so there are many settings that would effect its operation. If you are just running a simplex node, not a repeater, then you need to set the duplex setting in rpt.conf to   duplex=1   This is very important as the stock acid release sets this to  2 (repeater mode) and it can be very confusing when trying to get a simplex node working.  You will also want to put your call in the  idrecording= and also idtalkover=  in rpt.conf.  There are many other settings but most of the important ones should have been filled in by the setup or be at good default starting values.

Kindly i am bit confused about this. I will be grateful if anyone can answer to my questions.
This is often confusing to a newcomer and probably more so to your with the language issue. I hope this helps. I also think that you might have more start up luck using the Beagle Bone Black -  hamvoip.org - as it comes up and asks all of the important questions to configure your node and when you are done you should be able to use it straight away with the radio. 

You did not mention but I presume you did get a node number and password at allstarlink.org???

Regards, Salik Mumtaz Satti, A-EXEN

National Radio And Telecommunication Corporation, Haripur Pakistan 

www.nrtc.com.pk

salik.satti at nrtc.com.pk

Contact: +923155414048

Skype: salik.satti6



 

     On Friday, November 14, 2014 1:01 AM, Doug Crompton <doug at crompton.com> wrote:
    

 Salik,  I think you need to give us more information. What kind of problems are you having? Is it just with the DMK URI or Allstar in general?The DMK URI's green LED should light up at boot and if you type at the Linux prompt 'lsusb' you should see it listed. That would be your first step. It should look like this. The C-media device is the DMK URI. You may have other USB devices present also.[root at WA3DSP_Allstar ~]# lsusbBus 001 Device 001: ID 0000:0000Bus 001 Device 002: ID 0d8c:013a C-Media Electronics, Inc.Bus 002 Device 001: ID 0000:0000If that seems OK then when you start Asterisk and everything is configured properly the green LED should blink at about a 2pps rate.As far as your node is concerned, have you received a node number and password from allstarlink.org?If you have questions about the configuration files I am sure someone here could help you.Also have you considered using the Beagle Bone Black for your node? I am not sure if that is available in your country or how easy it is to get but it is much easier to setup and use. If you had all the hardware you could have it setup and running in 10 minutes or less. The DMK URI would be the most expensive item and you already have that. You can view the web page at:hamvoip.org 73 DougWA3DSPhttp://www.crompton.com/hamradioDate: Fri, 14 Nov 2014 04:27:35 +0000From: saliksatti at yahoo.comTo: app_rpt-users at ohnosec.orgSubject: [App_rpt-users] Installation And configuration of URIs with	asterisk app_rptHi All,          I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance. Salik Mumtaz Satti, A-EXEN
National Radio And Telecommunication Corporation, Haripur Pakistan 
www.nrtc.com.pk
salik.satti at nrtc.com.pk
Contact: +923155414048
Skype: salik.satti6

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  

      
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/b86673dc/attachment.html>

From doug at crompton.com  Mon Nov 17 05:51:22 2014
From: doug at crompton.com (Doug Crompton)
Date: Mon, 17 Nov 2014 00:51:22 -0500
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <C7F7EA8A-A494-4341-B432-B87CA7165BBC@mac.com>
References: <5468130C.1020801@bryanfields.net>,
	<BLU172-W1400E3E7DACECC0BA6151EBA8A0@phx.gbl>,
	<WM!f3756f1b0a605ad789be1befa905d98b1e3e96d1b6528e9e52773016bc27c68aa5cb7adfca71c0c771bd2a189697aeab!@asav-1.01.com>,
	<5469786D.5080103@bryanfields.net>,
	<BLU172-W11A99ADEA95B2FE4143F0FBA8B0@phx.gbl>,
	<C7F7EA8A-A494-4341-B432-B87CA7165BBC@mac.com>
Message-ID: <BLU172-W44727693B5DCE2003908C6BA8B0@phx.gbl>

Yes, Allmon is certainly another choice that I think would give you what you want.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: tim.sawyer at mac.com
Date: Sun, 16 Nov 2014 21:12:59 -0800
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Show link topology from cli?

or with rpt lstats <your-node_number>
Allmon looks like this...


--
Tim
:wq


On Nov 16, 2014, at 9:04 PM, Doug Crompton <doug at crompton.com> wrote:Locally you can see the nodes you are connected to with the Asterisk CLI by doing -rpt nodes <your-node_number>

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/c5caf315/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screen Shot 2014-11-16 at 9.07.04 PM.png
Type: image/png
Size: 129078 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/c5caf315/attachment.png>

From k5tra at austin.rr.com  Mon Nov 17 06:37:51 2014
From: k5tra at austin.rr.com (k5tra)
Date: Mon, 17 Nov 2014 00:37:51 -0600
Subject: [App_rpt-users] Show link topology from cli?
Message-ID: <000401d00231$02995280$07cbf780$@rr.com>

I'll share a couple of shell scripts that I use from CLI to monitor what's
connected and the key/unkey status or all connected nodes.

The main function is monitor.sh:

 

#! /bin/bash

if [ -e /var/run/asterisk.ctl ]

then

                clear

                echo "Type CTL-C to exit"

                echo ""

                KEY=`/usr/local/sbin/vars29521.sh | grep --color=always TK`

                UNKEY=`/usr/local/sbin/vars29521.sh | grep --color=always
TU`

                if [ -n $KEY ] 

                then

                                echo $KEY

                fi

                if [ -z $KEY ]

                then

                                echo $UNKEY

        fi

                count=1

                until [ $count = "10000" ]

                do

                                ##  echo "Argument number $count"

                        count=`expr $count + 1`

                                TMP1=`/usr/local/sbin/vars29521.sh | grep
RPT_ALINKS`

                                TMP2=`/usr/local/sbin/vars29521.sh | grep
RPT_ALINKS`

                                while [ $TMP1 == $TMP2 ]

                                do

 
TMP1=`/usr/local/sbin/vars29521.sh | grep RPT_ALINKS`

                                done

                                clear

                        echo "Type CTL-C to exit"

                                echo ""

                                KEY=`/usr/local/sbin/vars29521.sh | grep
--color=always TK`

                                UNKEY=`/usr/local/sbin/vars29521.sh | grep
--color=always TU`

                                if [ -n $KEY ] 

                                then

                                                echo $KEY

                                fi

                                if [ -z $KEY ]

                                then

                                                echo $UNKEY

                        fi

                done     

                echo ""

                echo ""

else

                echo "Asterisk is not running!"

fi

 

The scipt that is called internally is vars29521.sh:

 

#! /bin/bash

if [ -e /var/run/asterisk.ctl ]

then

                asterisk -rx "rpt showvars 29521"

                echo ""

else

                echo "Asterisk is not running!"

fi

 

 

You will have to replace 29521 with your node number of course.

 

Tom / K5TRA

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/ea4b1dbd/attachment.html>

From doug at crompton.com  Mon Nov 17 18:26:58 2014
From: doug at crompton.com (Doug Crompton)
Date: Mon, 17 Nov 2014 13:26:58 -0500
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <000401d00231$02995280$07cbf780$@rr.com>
References: <000401d00231$02995280$07cbf780$@rr.com>
Message-ID: <BLU172-W4798F7E5231A55748CC4F5BA8B0@phx.gbl>

That is certainly a way to do it. Here is another option that doesn't mess with the CLI. The 'archivedir' command in rpt.conf creates dated text files of all node activity. Unfortunately it also saves wav files of all of the audio. This is not a problem on a large disk based system but on the BBB it would just not work. So new in the BBB code is a command called 'archiveaudio' which was created to turn off the saving of the audio portion of the archive thus greatly reducing the storage load. I am not sure if this command has made its way to Acid. If you do use this on the BBB make sure you archive to a tmpfs like /tmp and also delete past files periodically because even they get large depending on you nodes activity. 'archivedir' saves based on date, creating one file per calendar day. 

Example of using command in rpt.conf:

[27225]
rxchannel = SimpleUSB/usb
duplex=1
erxgain=-3
etxgain=3
archivedir=/var/log/asterisk/audio
archiveaudio=0          ; Disable saving .wav files

This creates a directory under the archivedir path of the node number.  Multiple archives can be stored if you put these commands in each node stanza. This listing shows files dating back to July 31 of all node activity. This is an Acid system modified to not save audio files.

[root at WA3DSP_Allstar asterisk]# cd /var/log/asterisk/audio/27225/
[root at WA3DSP_Allstar 27225]# ls
20140731.txt  20140815.txt  20140830.txt  20140914.txt  20140929.txt  20141014.txt  20141029.txt  20141113.txt
20140801.txt  20140816.txt  20140831.txt  20140915.txt  20140930.txt  20141015.txt  20141030.txt  20141114.txt
20140802.txt  20140817.txt  20140901.txt  20140916.txt  20141001.txt  20141016.txt  20141031.txt  20141115.txt
20140803.txt  20140818.txt  20140902.txt  20140917.txt  20141002.txt  20141017.txt  20141101.txt  20141116.txt
20140804.txt  20140819.txt  20140903.txt  20140918.txt  20141003.txt  20141018.txt  20141102.txt  20141117.txt
20140805.txt  20140820.txt  20140904.txt  20140919.txt  20141004.txt  20141019.txt  20141103.txt  rxlog.txt
20140806.txt  20140821.txt  20140905.txt  20140920.txt  20141005.txt  20141020.txt  20141104.txt  tail.pl
20140807.txt  20140822.txt  20140906.txt  20140921.txt  20141006.txt  20141021.txt  20141105.txt  
20140808.txt  20140823.txt  20140907.txt  20140922.txt  20141007.txt  20141022.txt  20141106.txt
20140809.txt  20140824.txt  20140908.txt  20140923.txt  20141008.txt  20141023.txt  20141107.txt
20140810.txt  20140825.txt  20140909.txt  20140924.txt  20141009.txt  20141024.txt  20141108.txt
20140811.txt  20140826.txt  20140910.txt  20140925.txt  20141010.txt  20141025.txt  20141109.txt
20140812.txt  20140827.txt  20140911.txt  20140926.txt  20141011.txt  20141026.txt  20141110.txt
20140813.txt  20140828.txt  20140912.txt  20140927.txt  20141012.txt  20141027.txt  20141111.txt
20140814.txt  20140829.txt  20140913.txt  20140928.txt  20141013.txt  20141028.txt  20141112.txt

tail.pl, a Perl script which is attached, deals with the extraction of the data. In this case the RXKEY's only indicating who key the circuit. I also pull in the database file to nicely display the node QTH and location.

Here is what the processed rxlog looks like:

09/09/2014 08:41:26 RXKEY 40865   WD9EQD  147.435 Simplex       Smithville, NJ
09/09/2014 08:41:39 RXKEY 40561   WA3DSP  ECHOLINK - 147090     Richboro, PA - Hub
09/09/2014 08:41:45 RXKEY 40865   WD9EQD  147.435 Simplex       Smithville, NJ
09/09/2014 08:41:49 RXKEY 40561   WA3DSP  ECHOLINK - 147090     Richboro, PA - Hub
09/09/2014 08:41:59 RXKEY 29817   NY3J    446.150 Simplex 91.5  Bensalem, PA

The rxlog is read by a simple script which keeps tabs on what the system is doing. The Perl script, tail.pl, is run in the background constantly monitoring the current archive file and saving parsed data to rxlog.txt :

[root at WA3DSP_Allstar 27225]# cat /usr/local/sbin/rxlog.sh
#! /bin/bash

tail -f /var/log/asterisk/audio/27225/rxlog.txt

Of course this could be expanded to view other parameters as all of the control data is in the individual text files. In my case the only thing that was important to me was who keyed or who is keyed in a situation where someone is hanging a circuit. It would be easy to show keyed status in a display using RXKEY and RXUNKEY 

Where you put the files and how you deal with the data is your option. These are only examples.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/fb555d99/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: tail.pl
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/fb555d99/attachment.pl>

From electricity440 at gmail.com  Mon Nov 17 23:01:15 2014
From: electricity440 at gmail.com (Skyler Fennell)
Date: Mon, 17 Nov 2014 16:01:15 -0700
Subject: [App_rpt-users] Video on setting up Allstar
Message-ID: <35CDFB02-0818-4FC8-B2AE-A178BC1474A5@gmail.com>

Hi everyone,

Been working in this YouTube video for beginners on setting up Allstar link.

I have it unlisted for now, waiting if I need to edit it for various reasons (ex if I have incorrect info or something someone wants to add) before I release to general public.

So here is the link to part one, part two will hopefully come soon. 

https://m.youtube.com/watch?v=jJa0Rsj3ZyY

Tell me if you have any comments, thoughts, or if I should make any changes, and ideas for the next videos.

73
Skyler KD?WHB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141117/7d2904b4/attachment.html>

From jrorke at cogeco.ca  Tue Nov 18 13:49:33 2014
From: jrorke at cogeco.ca (REDBUTTON_CTRL)
Date: Tue, 18 Nov 2014 08:49:33 -0500
Subject: [App_rpt-users] good connection to URI?
In-Reply-To: <54696777.3030003@va3uv.com>
References: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>
	<54696777.3030003@va3uv.com>
Message-ID: <546B4E6D.6030809@cogeco.ca>

Just to add to Ramesh's pinouts

TKR 850 -------- URI

8 (TD) --------- 23 (R_out)
9 (TA) --------- 22 (L_out)
10 (RD)-------- 21 (Mic in)
16 (EPTT)-------1 (PTT)
17 (SC) --------- 8 (Cor in)
12 (RXG) ------19 (Gnd)
19 (TXG) ------ 20 (Gnd)

You may need to add the extra audio grounds RXG and TXG.

Jon VA3RQ




On 11/16/2014 10:11 PM, Ramesh Dhami (VA3UV) wrote:
> Hi Pierre:
>
> Try this:
>
> TKR 850     URI
>
> 8           23
> 9           22
> 10          21
> 16           1
> 25           8
>
>
> This is per my external MUX and how I have my 850 setup for dual mode 
> (DV and FM).
>
> Note, you will need to configure the usbradio.conf file appropriately 
> to send the tone out on the RIGHT channel and the Audio out on the 
> LEFT channel.
>
> Let me know how it goes!
>
> Ramesh.
>
>
> On 16/11/2014 11:13 AM, pete M wrote:
>> Hi guys..
>>
>> ast week i did a harness to hook my tkr-750 ver 2 to a URI
>>
>> here is what I did:
>>
>> tkr-750 pin ----- uri
>>
>> 8 to 22 (ctcss tone to tkr)
>> 9 to 26 (voice to tkr)
>> 10 to 21 (audio to uri)
>> 12 to 19 (ground)
>> 16 to 1 (ptt)
>> 17 to 8 (cor)
>>
>> I dont need the cor cause I want to do all the signaling by dsp but
>> still hoocked it up in case..
>>
>> So does this make sens? cause I cant have the ctcss level right.
>>
>> I try to switch the ctcss and voice from left to right in case I had
>> reverse the wiring.
>> put both channel as tone and voice to test. no go I cant send ctcss from
>> the URI.
>>
>> I know I can send it from the repeater itself.. But I want to control
>> when it is sent.
>>
>> Thanks for taking the time to help me ;-)
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.


From N1XBM at amsat.org  Tue Nov 18 14:54:20 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Tue, 18 Nov 2014 09:54:20 -0500
Subject: [App_rpt-users] Update to gmail failure
Message-ID: <CAM09xEYv3Sq-vLGXtir2+FDMFRM-g8m01XaA+Tb2uq4RTVujDA@mail.gmail.com>

A while back I stated up an email script on my node. For about a month once
a week my node would get locked out of gmail and I'd have to log into the
Web site and unlock the account.  I tried everything that people suggested
to no avail.

It just dawned on me the other day it's been two months and I haven't had a
hitch with my my email updates from the  node. So it appears whatever was
going on corrected itself.  Strange I know!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141118/bb3d22e4/attachment.html>

From demoman at rollanet.org  Tue Nov 18 18:19:47 2014
From: demoman at rollanet.org (Chris Curtis)
Date: Tue, 18 Nov 2014 12:19:47 -0600
Subject: [App_rpt-users] kernel panic in the cold
Message-ID: <019701d0035c$3c99c790$b5cd56b0$@org>

It's cold out in the shed.
No climate control at all.

Could this be the culprit of my almost immediate kernel panic lockups ?
Server/nodes had been running fine over the summer.

I've brought the box inside the house and will run it with the dongles
attached to see if some heat will fix the problem.

Just wondering if anyone else had been experiencing:
"kernel panic not synching fatal exception in interrupt";
these past months.

Thanks for your time,

Chris
KB0WLF

Chris
KB0WLF





From petem001 at hotmail.com  Tue Nov 18 18:28:45 2014
From: petem001 at hotmail.com (pete M)
Date: Tue, 18 Nov 2014 13:28:45 -0500
Subject: [App_rpt-users] good connection to URI?
In-Reply-To: <546B4E6D.6030809@cogeco.ca>
References: <BAY176-W71A695D540BF6E61ED105978A0@phx.gbl>,
	<54696777.3030003@va3uv.com>, <546B4E6D.6030809@cogeco.ca>
Message-ID: <BAY176-W17D5B0AD264A4BF51EA8B797880@phx.gbl>

I use a large  9 conductor shielded cable 16# wire that I is used in acces control system. got a 1000 feet roll doing nothing. I connect the shield on one side only, and I use one of the conductor for ground both the audio and signaling will switch that to 2 different cable.
so aside the obvious typo about pin 26 ;-) wich is 23.. I was in the ball park.. 

Thanks both Ramesh and Jon for the info!


> Date: Tue, 18 Nov 2014 08:49:33 -0500
> From: jrorke at cogeco.ca
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] good connection to URI?
> 
> Just to add to Ramesh's pinouts
> 
> TKR 850 -------- URI
> 
> 8 (TD) --------- 23 (R_out)
> 9 (TA) --------- 22 (L_out)
> 10 (RD)-------- 21 (Mic in)
> 16 (EPTT)-------1 (PTT)
> 17 (SC) --------- 8 (Cor in)
> 12 (RXG) ------19 (Gnd)
> 19 (TXG) ------ 20 (Gnd)
> 
> You may need to add the extra audio grounds RXG and TXG.
> 
> Jon VA3RQ
> 
> 
> 
> 
> On 11/16/2014 10:11 PM, Ramesh Dhami (VA3UV) wrote:
> > Hi Pierre:
> >
> > Try this:
> >
> > TKR 850     URI
> >
> > 8           23
> > 9           22
> > 10          21
> > 16           1
> > 25           8
> >
> >
> > This is per my external MUX and how I have my 850 setup for dual mode 
> > (DV and FM).
> >
> > Note, you will need to configure the usbradio.conf file appropriately 
> > to send the tone out on the RIGHT channel and the Audio out on the 
> > LEFT channel.
> >
> > Let me know how it goes!
> >
> > Ramesh.
> >
> >
> > On 16/11/2014 11:13 AM, pete M wrote:
> >> Hi guys..
> >>
> >> ast week i did a harness to hook my tkr-750 ver 2 to a URI
> >>
> >> here is what I did:
> >>
> >> tkr-750 pin ----- uri
> >>
> >> 8 to 22 (ctcss tone to tkr)
> >> 9 to 23 (voice to tkr)
> >> 10 to 21 (audio to uri)
> >> 12 to 19 (ground)
> >> 16 to 1 (ptt)
> >> 17 to 8 (cor)
> >>
> >> I dont need the cor cause I want to do all the signaling by dsp but
> >> still hoocked it up in case..
> >>
> >> So does this make sens? cause I cant have the ctcss level right.
> >>
> >> I try to switch the ctcss and voice from left to right in case I had
> >> reverse the wiring.
> >> put both channel as tone and voice to test. no go I cant send ctcss from
> >> the URI.
> >>
> >> I know I can send it from the repeater itself.. But I want to control
> >> when it is sent.
> >>
> >> Thanks for taking the time to help me ;-)
> >>
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit 
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> >> down to the bottom of the page. Enter your email address and press 
> >> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email 
> >> confirmation. If you have trouble unsubscribing, please send a 
> >> message to the list detailing the problem.
> >>
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit 
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> > down to the bottom of the page. Enter your email address and press the 
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email 
> > confirmation. If you have trouble unsubscribing, please send a message 
> > to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141118/b2986169/attachment.html>

From doug at crompton.com  Wed Nov 19 05:07:34 2014
From: doug at crompton.com (Doug Crompton)
Date: Wed, 19 Nov 2014 00:07:34 -0500
Subject: [App_rpt-users] kernel panic in the cold
In-Reply-To: <019701d0035c$3c99c790$b5cd56b0$@org>
References: <019701d0035c$3c99c790$b5cd56b0$@org>
Message-ID: <BLU172-W2723F6C8D6FAD865B9C955BA890@phx.gbl>

Chris,

 Hard to say but since (I guess) thats the only thing that changed it would probably be a prime suspect. What was the low temperature there? I would be interested if it recovered when you warmed it up.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> From: demoman at rollanet.org
> To: app_rpt-users at ohnosec.org
> Date: Tue, 18 Nov 2014 12:19:47 -0600
> Subject: [App_rpt-users] kernel panic in the cold
> 
> It's cold out in the shed.
> No climate control at all.
> 
> Could this be the culprit of my almost immediate kernel panic lockups ?
> Server/nodes had been running fine over the summer.
> 
> I've brought the box inside the house and will run it with the dongles
> attached to see if some heat will fix the problem.
> 
> Just wondering if anyone else had been experiencing:
> "kernel panic not synching fatal exception in interrupt";
> these past months.
> 
> Thanks for your time,
> 
> Chris
> KB0WLF
> 
> Chris
> KB0WLF
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141119/dd9b15d2/attachment.html>

From saliksatti at yahoo.com  Wed Nov 19 06:12:45 2014
From: saliksatti at yahoo.com (Salik Satti)
Date: Wed, 19 Nov 2014 06:12:45 +0000 (UTC)
Subject: [App_rpt-users] Show link topology from cli?
In-Reply-To: <BLU172-W4798F7E5231A55748CC4F5BA8B0@phx.gbl>
References: <BLU172-W4798F7E5231A55748CC4F5BA8B0@phx.gbl>
Message-ID: <831683790.1059010.1416377565363.JavaMail.yahoo@jws10063.mail.ne1.yahoo.com>

Hi 
why do i need to connect my node with allstar or echolink i just want to set it up locally. how to set all this totally locally between two nodes. 
Regards,
?Salik Mumtaz Satti, A-EXEN
National Radio And Telecommunication Corporation, Haripur Pakistan 
www.nrtc.com.pk
salik.satti at nrtc.com.pk
Contact: +923155414048
Skype: salik.satti6

 

     On Monday, November 17, 2014 11:27 PM, Doug Crompton <doug at crompton.com> wrote:
   

 #yiv7828002334 #yiv7828002334 --.yiv7828002334hmmessage P{margin:0px;padding:0px;}#yiv7828002334 body.yiv7828002334hmmessage{font-size:12pt;font-family:Calibri;}#yiv7828002334 That is certainly a way to do it. Here is another option that doesn't mess with the CLI. The 'archivedir' command in rpt.conf creates dated text files of all node activity. Unfortunately it also saves wav files of all of the audio. This is not a problem on a large disk based system but on the BBB it would just not work. So new in the BBB code is a command called 'archiveaudio' which was created to turn off the saving of the audio portion of the archive thus greatly reducing the storage load. I am not sure if this command has made its way to Acid. If you do use this on the BBB make sure you archive to a tmpfs like /tmp and also delete past files periodically because even they get large depending on you nodes activity. 'archivedir' saves based on date, creating one file per calendar day. 

Example of using command in rpt.conf:

[27225]
rxchannel = SimpleUSB/usb
duplex=1
erxgain=-3
etxgain=3
archivedir=/var/log/asterisk/audio
archiveaudio=0????????? ; Disable saving .wav files

This creates a directory under the archivedir path of the node number.? Multiple archives can be stored if you put these commands in each node stanza. This listing shows files dating back to July 31 of all node activity. This is an Acid system modified to not save audio files.

[root at WA3DSP_Allstar asterisk]# cd /var/log/asterisk/audio/27225/
[root at WA3DSP_Allstar 27225]# ls
20140731.txt? 20140815.txt? 20140830.txt? 20140914.txt? 20140929.txt? 20141014.txt? 20141029.txt? 20141113.txt
20140801.txt? 20140816.txt? 20140831.txt? 20140915.txt? 20140930.txt? 20141015.txt? 20141030.txt? 20141114.txt
20140802.txt? 20140817.txt? 20140901.txt? 20140916.txt? 20141001.txt? 20141016.txt? 20141031.txt? 20141115.txt
20140803.txt? 20140818.txt? 20140902.txt? 20140917.txt? 20141002.txt? 20141017.txt? 20141101.txt? 20141116.txt
20140804.txt? 20140819.txt? 20140903.txt? 20140918.txt? 20141003.txt? 20141018.txt? 20141102.txt? 20141117.txt
20140805.txt? 20140820.txt? 20140904.txt? 20140919.txt? 20141004.txt? 20141019.txt? 20141103.txt? rxlog.txt
20140806.txt? 20140821.txt? 20140905.txt? 20140920.txt? 20141005.txt? 20141020.txt? 20141104.txt? tail.pl
20140807.txt? 20140822.txt? 20140906.txt? 20140921.txt? 20141006.txt? 20141021.txt? 20141105.txt? 
20140808.txt? 20140823.txt? 20140907.txt? 20140922.txt? 20141007.txt? 20141022.txt? 20141106.txt
20140809.txt? 20140824.txt? 20140908.txt? 20140923.txt? 20141008.txt? 20141023.txt? 20141107.txt
20140810.txt? 20140825.txt? 20140909.txt? 20140924.txt? 20141009.txt? 20141024.txt? 20141108.txt
20140811.txt? 20140826.txt? 20140910.txt? 20140925.txt? 20141010.txt? 20141025.txt? 20141109.txt
20140812.txt? 20140827.txt? 20140911.txt? 20140926.txt? 20141011.txt? 20141026.txt? 20141110.txt
20140813.txt? 20140828.txt? 20140912.txt? 20140927.txt? 20141012.txt? 20141027.txt? 20141111.txt
20140814.txt? 20140829.txt? 20140913.txt? 20140928.txt? 20141013.txt? 20141028.txt? 20141112.txt

tail.pl, a Perl script which is attached, deals with the extraction of the data. In this case the RXKEY's only indicating who key the circuit. I also pull in the database file to nicely display the node QTH and location.

Here is what the processed rxlog looks like:

09/09/2014 08:41:26 RXKEY 40865?? WD9EQD? 147.435 Simplex?????? Smithville, NJ
09/09/2014 08:41:39 RXKEY 40561?? WA3DSP? ECHOLINK - 147090???? Richboro, PA - Hub
09/09/2014 08:41:45 RXKEY 40865?? WD9EQD? 147.435 Simplex?????? Smithville, NJ
09/09/2014 08:41:49 RXKEY 40561?? WA3DSP? ECHOLINK - 147090???? Richboro, PA - Hub
09/09/2014 08:41:59 RXKEY 29817?? NY3J??? 446.150 Simplex 91.5? Bensalem, PA

The rxlog is read by a simple script which keeps tabs on what the system is doing. The Perl script, tail.pl, is run in the background constantly monitoring the current archive file and saving parsed data to rxlog.txt :

[root at WA3DSP_Allstar 27225]# cat /usr/local/sbin/rxlog.sh
#! /bin/bash

tail -f /var/log/asterisk/audio/27225/rxlog.txt

Of course this could be expanded to view other parameters as all of the control data is in the individual text files. In my case the only thing that was important to me was who keyed or who is keyed in a situation where someone is hanging a circuit. It would be easy to show keyed status in a display using RXKEY and RXUNKEY 

Where you put the files and how you deal with the data is your option. These are only examples.

73 Doug
WA3DSP
http://www.crompton.com/hamradio


 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141119/4e62aaf9/attachment.html>

From kj6ko at innercite.com  Wed Nov 19 06:23:49 2014
From: kj6ko at innercite.com (KJ6KO)
Date: Tue, 18 Nov 2014 22:23:49 -0800
Subject: [App_rpt-users] kernel panic in the cold
References: <019701d0035c$3c99c790$b5cd56b0$@org>
	<BLU172-W2723F6C8D6FAD865B9C955BA890@phx.gbl>
Message-ID: <2C716E3852CD4C67ADE11842E58BE8F8@KJ6KO>

I would be interested in the temp also.  Rarely drops below 42 in my garage, but I am looking at a hilltop site or two in the future!  One at over 10,000' !  May get a bit cool up there!

KJ6KO

www.nc9rs.com


  ----- Original Message ----- 
  From: Doug Crompton 
  To: Chris Curtis 
  Cc: app_rpt-users at ohnosec.org 
  Sent: Tuesday, November 18, 2014 9:07 PM
  Subject: Re: [App_rpt-users] kernel panic in the cold


  Chris,

   Hard to say but since (I guess) thats the only thing that changed it would probably be a prime suspect. What was the low temperature there? I would be interested if it recovered when you warmed it up.

  73 Doug
  WA3DSP
  http://www.crompton.com/hamradio



  > From: demoman at rollanet.org
  > To: app_rpt-users at ohnosec.org
  > Date: Tue, 18 Nov 2014 12:19:47 -0600
  > Subject: [App_rpt-users] kernel panic in the cold
  > 
  > It's cold out in the shed.
  > No climate control at all.
  > 
  > Could this be the culprit of my almost immediate kernel panic lockups ?
  > Server/nodes had been running fine over the summer.
  > 
  > I've brought the box inside the house and will run it with the dongles
  > attached to see if some heat will fix the problem.
  > 
  > Just wondering if anyone else had been experiencing:
  > "kernel panic not synching fatal exception in interrupt";
  > these past months.
  > 
  > Thanks for your time,
  > 
  > Chris
  > KB0WLF
  > 
  > Chris
  > KB0WLF
  > 
  > 
  > 
  > _______________________________________________
  > App_rpt-users mailing list
  > App_rpt-users at ohnosec.org
  > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
  > 
  > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
  > 



------------------------------------------------------------------------------


  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


  __________ Information from ESET NOD32 Antivirus, version of virus signature database 10746 (20141119) __________

  The message was checked by ESET NOD32 Antivirus.

  http://www.eset.com




__________ Information from ESET NOD32 Antivirus, version of virus signature database 10746 (20141119) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141118/e620b185/attachment.html>

From vencl at att.net  Wed Nov 19 12:39:19 2014
From: vencl at att.net (Lu Vencl)
Date: Wed, 19 Nov 2014 07:39:19 -0500
Subject: [App_rpt-users] kernel panic in the cold
In-Reply-To: <2C716E3852CD4C67ADE11842E58BE8F8@KJ6KO>
References: <019701d0035c$3c99c790$b5cd56b0$@org>
	<BLU172-W2723F6C8D6FAD865B9C955BA890@phx.gbl>
	<2C716E3852CD4C67ADE11842E58BE8F8@KJ6KO>
Message-ID: <52A02E3A-14B2-4524-803C-3CFB898546F0@att.net>

I had a problem like this when my node in Woodland Park, CO saw temps down below freezing. The fix was to go with a ssd. Problem solved. 

Lu Vencl

> On Nov 19, 2014, at 1:23 AM, KJ6KO <kj6ko at innercite.com> wrote:
> 
> I would be interested in the temp also.  Rarely drops below 42 in my garage, but I am looking at a hilltop site or two in the future!  One at over 10,000' !  May get a bit cool up there!
>  
> KJ6KO
>  
> www.nc9rs.com
>  
>  
> ----- Original Message -----
> From: Doug Crompton
> To: Chris Curtis
> Cc: app_rpt-users at ohnosec.org
> Sent: Tuesday, November 18, 2014 9:07 PM
> Subject: Re: [App_rpt-users] kernel panic in the cold
> 
> Chris,
> 
>  Hard to say but since (I guess) thats the only thing that changed it would probably be a prime suspect. What was the low temperature there? I would be interested if it recovered when you warmed it up.
> 
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> > From: demoman at rollanet.org
> > To: app_rpt-users at ohnosec.org
> > Date: Tue, 18 Nov 2014 12:19:47 -0600
> > Subject: [App_rpt-users] kernel panic in the cold
> > 
> > It's cold out in the shed.
> > No climate control at all.
> > 
> > Could this be the culprit of my almost immediate kernel panic lockups ?
> > Server/nodes had been running fine over the summer.
> > 
> > I've brought the box inside the house and will run it with the dongles
> > attached to see if some heat will fix the problem.
> > 
> > Just wondering if anyone else had been experiencing:
> > "kernel panic not synching fatal exception in interrupt";
> > these past months.
> > 
> > Thanks for your time,
> > 
> > Chris
> > KB0WLF
> > 
> > Chris
> > KB0WLF
> > 
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> > 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 10746 (20141119) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> 
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 10746 (20141119) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141119/df7cd9d6/attachment.html>

From mike.lussier at gmail.com  Wed Nov 19 12:59:31 2014
From: mike.lussier at gmail.com (Michael Lussier)
Date: Wed, 19 Nov 2014 07:59:31 -0500
Subject: [App_rpt-users] Subject:  kernel panic in the cold
Message-ID: <7CFC3EC2-B7DA-43C0-ADAA-1824E9BBEAFE@gmail.com>

I noticed my repeater is off this morning. I happen to be going up on the mountain this morning. It's 14 degrees here so it's got to be single digits up there at 2500 feet. 

Will up date later 

Mike AE4ML

Sent from an iPhone 5 iOS 8

Mike.Lussier at gmail.com
AE4ML at arrl.net
AE4ML at amsat.org





From keith at goobie.org  Wed Nov 19 13:13:29 2014
From: keith at goobie.org (Keith Goobie)
Date: Wed, 19 Nov 2014 08:13:29 -0500
Subject: [App_rpt-users] Subject:  kernel panic in the cold
In-Reply-To: <7CFC3EC2-B7DA-43C0-ADAA-1824E9BBEAFE@gmail.com>
Message-ID: <D09201A9.39DEB%keith@goobie.org>

Why not take a lightbulb (higher wattage) and use it as a simple source of
heat to test out your theory.

Keith


On 11/19/14 7:59 AM, "Michael Lussier" <mike.lussier at gmail.com> wrote:

> I noticed my repeater is off this morning. I happen to be going up on the
> mountain this morning. It's 14 degrees here so it's got to be single digits up
> there at 2500 feet.
> 
> Will up date later
> 
> Mike AE4ML
> 
> Sent from an iPhone 5 iOS 8
> 
> Mike.Lussier at gmail.com
> AE4ML at arrl.net
> AE4ML at amsat.org
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA




From mike.lussier at gmail.com  Wed Nov 19 13:18:43 2014
From: mike.lussier at gmail.com (Michael Lussier)
Date: Wed, 19 Nov 2014 08:18:43 -0500
Subject: [App_rpt-users] Subject:  kernel panic in the cold
In-Reply-To: <D09201A9.39DEB%keith@goobie.org>
References: <D09201A9.39DEB%keith@goobie.org>
Message-ID: <465DEE13-F706-4688-AE91-6C36E98DD08F@gmail.com>

I don't know if my problem is a temp issue yet. 

Sent from an iPhone 5 iOS 8

Mike.Lussier at gmail.com
AE4ML at arrl.net
AE4ML at amsat.org




> On Nov 19, 2014, at 08:13, Keith Goobie <keith at goobie.org> wrote:
> 
> Why not take a lightbulb (higher wattage) and use it as a simple source of
> heat to test out your theory.
> 
> Keith
> 
> 
>> On 11/19/14 7:59 AM, "Michael Lussier" <mike.lussier at gmail.com> wrote:
>> 
>> I noticed my repeater is off this morning. I happen to be going up on the
>> mountain this morning. It's 14 degrees here so it's got to be single digits up
>> there at 2500 feet.
>> 
>> Will up date later
>> 
>> Mike AE4ML
>> 
>> Sent from an iPhone 5 iOS 8
>> 
>> Mike.Lussier at gmail.com
>> AE4ML at arrl.net
>> AE4ML at amsat.org
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> the bottom of the page. Enter your email address and press the "Unsubscribe or
>> edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to the
>> list detailing the problem.
> 
> -- 
> keith at goobie.org
> Keith Goobie
> Richmond Hill, ON, CANADA
> 
> 


From steve at donegan.org  Wed Nov 19 13:23:55 2014
From: steve at donegan.org (Steven Donegan)
Date: Wed, 19 Nov 2014 13:23:55 +0000 (UTC)
Subject: [App_rpt-users] Subject:  kernel panic in the cold
In-Reply-To: <D09201A9.39DEB%keith@goobie.org>
References: <D09201A9.39DEB%keith@goobie.org>
Message-ID: <44914846.2542532.1416403435176.JavaMail.yahoo@jws10611.mail.bf1.yahoo.com>

If this is about the BBB - the CPU itself is rated 32F as it's absolute minimum (TI does make CPU's that are rated lower but I doubt the BBB has a Mil spec CPU/other components).
You cab buy temperature/humidity 'capes' for the BBB - get one of those and a relay control cape, and have the BBB turn on/off a heat source as required :-)
?____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

      From: Keith Goobie <keith at goobie.org>
 To: Michael Lussier <mike.lussier at gmail.com>; ALL STAR <app_rpt-users at ohnosec.org> 
 Sent: Wednesday, November 19, 2014 5:13 AM
 Subject: Re: [App_rpt-users] Subject: kernel panic in the cold
   
Why not take a lightbulb (higher wattage) and use it as a simple source of
heat to test out your theory.

Keith


On 11/19/14 7:59 AM, "Michael Lussier" <mike.lussier at gmail.com> wrote:

> I noticed my repeater is off this morning. I happen to be going up on the
> mountain this morning. It's 14 degrees here so it's got to be single digits up
> there at 2500 feet.
> 
> Will up date later
> 
> Mike AE4ML
> 
> Sent from an iPhone 5 iOS 8
> 
> Mike.Lussier at gmail.com
> AE4ML at arrl.net
> AE4ML at amsat.org
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe or
> edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to the
> list detailing the problem.

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA




_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141119/05cf953d/attachment.html>

From demoman at rollanet.org  Wed Nov 19 15:12:13 2014
From: demoman at rollanet.org (Chris Curtis)
Date: Wed, 19 Nov 2014 09:12:13 -0600
Subject: [App_rpt-users] kernel panic in the cold
In-Reply-To: <20141118115628.71befee5dbd13c5325dd1a521b4e73ee.845da0f9e7.wbe@email06.secureserver.net>
References: <20141118115628.71befee5dbd13c5325dd1a521b4e73ee.845da0f9e7.wbe@email06.secureserver.net>
Message-ID: <01e301d0040b$332f17a0$998d46e0$@org>

Thanks for all the input.
After running 24 hours in the house without a hitch, I'm going to go with sub freezing temperatures as the culprit.

I realize I didn't put enough background in my post so here's a little more in case it'll help someone else.

Box:
Regular old hand me down desktop in a mini tower case. The acid/cent distro from the website link.
Old single core processor with HT enabled
Traditional spinning platter hard drive (SATA interface)
DDR2 ram
3 modified cm108 fobs

Shed:
Lowest temperature so far 9F
Averaging around 33F for the problem period

Why didn't I think of this before:
Last system I owned/operated was a 3 band repeater with an irlp node onsite.  The controller was an ff-800.
Only trouble I had in that non climate controlled shack was the ff-800 needed a warming pad draped over the cabinet in the winter.
The irlp node/pc never gave me any trouble but the ff-800 would 'talk funny' when it got really cold.

Should have remembered this earlier.
Again, thanks for the replies, I appreciate it.
Just like the well pumphouse, I'll put an incandescent light bulb near the box/fobs and try that.

Chris
KB0WLF

From: mike at midnighteng.com [mailto:mike at midnighteng.com] 
Sent: Tuesday, November 18, 2014 12:56 PM
To: Chris Curtis
Subject: RE: [App_rpt-users] kernel panic in the cold


Chris,

If this turns out to be the problem, let me know. I have made many options for such a winter occasion.
But be sure to check the cpu reporting of temp to bios and OS. Normally, they are meant to look for overheating not under-heating. But I have problems with the thermistor being out of intended range and that created a problem (disable temp mon in bios).
Many low power electronics/cpu's do not function well at sub freezing temps including the sound dongles.

...mike/kb8jnm
-------- Original Message --------
Subject: [App_rpt-users] kernel panic in the cold
From: "Chris Curtis" <demoman at rollanet.org>
Date: Tue, November 18, 2014 1:19 pm
To: <app_rpt-users at ohnosec.org>

It's cold out in the shed.
No climate control at all.

Could this be the culprit of my almost immediate kernel panic lockups ?
Server/nodes had been running fine over the summer.

I've brought the box inside the house and will run it with the dongles
attached to see if some heat will fix the problem.

Just wondering if anyone else had been experiencing:
"kernel panic not synching fatal exception in interrupt";
these past months.

Thanks for your time,

Chris
KB0WLF

Chris
KB0WLF



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



From n3xcc at repeater-builder.com  Wed Nov 19 15:36:28 2014
From: n3xcc at repeater-builder.com (Scott Zimmerman)
Date: Wed, 19 Nov 2014 10:36:28 -0500
Subject: [App_rpt-users] kernel panic in the cold
In-Reply-To: <01e301d0040b$332f17a0$998d46e0$@org>
References: <20141118115628.71befee5dbd13c5325dd1a521b4e73ee.845da0f9e7.wbe@email06.secureserver.net>
	<01e301d0040b$332f17a0$998d46e0$@org>
Message-ID: <546CB8FC.5050204@repeater-builder.com>

 > Traditional spinning platter hard drive (SATA interface)
Well there's your problem! My bet is that the system had trouble reading/writing to the HDD. We had 
this happen YEARS ago with a packet node.

My guess is that the platter motor on the drive can't keep it spinning fast enough when it gets cold 
due to the lubricant getting thick. If your PC's power save mode or HDD controller is configured to 
spin down the platters upon lack of use, that would further compound the problem.

All of our current PC based AllStar deployments use solid state hard drives and fanless 
motherboards. Never had a problem with either yet.

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531

On 11/19/2014 10:12 AM, Chris Curtis wrote:
> Thanks for all the input.
> After running 24 hours in the house without a hitch, I'm going to go with sub freezing temperatures as the culprit.
>
> I realize I didn't put enough background in my post so here's a little more in case it'll help someone else.
>
> Box:
> Regular old hand me down desktop in a mini tower case. The acid/cent distro from the website link.
> Old single core processor with HT enabled
> Traditional spinning platter hard drive (SATA interface)
> DDR2 ram
> 3 modified cm108 fobs
>
> Shed:
> Lowest temperature so far 9F
> Averaging around 33F for the problem period
>
> Why didn't I think of this before:
> Last system I owned/operated was a 3 band repeater with an irlp node onsite.  The controller was an ff-800.
> Only trouble I had in that non climate controlled shack was the ff-800 needed a warming pad draped over the cabinet in the winter.
> The irlp node/pc never gave me any trouble but the ff-800 would 'talk funny' when it got really cold.
>
> Should have remembered this earlier.
> Again, thanks for the replies, I appreciate it.
> Just like the well pumphouse, I'll put an incandescent light bulb near the box/fobs and try that.
>
> Chris
> KB0WLF
>
> From: mike at midnighteng.com [mailto:mike at midnighteng.com]
> Sent: Tuesday, November 18, 2014 12:56 PM
> To: Chris Curtis
> Subject: RE: [App_rpt-users] kernel panic in the cold
>
>
> Chris,
>
> If this turns out to be the problem, let me know. I have made many options for such a winter occasion.
> But be sure to check the cpu reporting of temp to bios and OS. Normally, they are meant to look for overheating not under-heating. But I have problems with the thermistor being out of intended range and that created a problem (disable temp mon in bios).
> Many low power electronics/cpu's do not function well at sub freezing temps including the sound dongles.
>
> ...mike/kb8jnm
> -------- Original Message --------
> Subject: [App_rpt-users] kernel panic in the cold
> From: "Chris Curtis" <demoman at rollanet.org>
> Date: Tue, November 18, 2014 1:19 pm
> To: <app_rpt-users at ohnosec.org>
>
> It's cold out in the shed.
> No climate control at all.
>
> Could this be the culprit of my almost immediate kernel panic lockups ?
> Server/nodes had been running fine over the summer.
>
> I've brought the box inside the house and will run it with the dongles
> attached to see if some heat will fix the problem.
>
> Just wondering if anyone else had been experiencing:
> "kernel panic not synching fatal exception in interrupt";
> these past months.
>
> Thanks for your time,
>
> Chris
> KB0WLF
>
> Chris
> KB0WLF
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>


From mike.lussier at gmail.com  Thu Nov 20 22:22:21 2014
From: mike.lussier at gmail.com (Michael Lussier)
Date: Thu, 20 Nov 2014 17:22:21 -0500
Subject: [App_rpt-users] Frozen repeater
Message-ID: <1E48F314-8548-46CF-99A7-61C7942F03C2@gmail.com>


I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 

Sent from an iPhone 5 iOS 8

Mike.Lussier at gmail.com
AE4ML at arrl.net
AE4ML at amsat.org





From mike at midnighteng.com  Thu Nov 20 22:52:00 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Thu, 20 Nov 2014 15:52:00 -0700
Subject: [App_rpt-users] =?utf-8?q?Frozen_repeater?=
Message-ID: <20141120155200.71befee5dbd13c5325dd1a521b4e73ee.e613fb8f9c.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141120/ba20f285/attachment.html>

From petem001 at hotmail.com  Thu Nov 20 23:38:12 2014
From: petem001 at hotmail.com (pete M)
Date: Thu, 20 Nov 2014 18:38:12 -0500
Subject: [App_rpt-users] Frozen repeater
In-Reply-To: <1E48F314-8548-46CF-99A7-61C7942F03C2@gmail.com>
References: <1E48F314-8548-46CF-99A7-61C7942F03C2@gmail.com>
Message-ID: <BAY176-W158BE79DBD7F76566A720797760@phx.gbl>

Hi, it all depend how much power you got.. are you on solar power or wind turbine? or on line power?
there is  a nice type of housing that you could use for your BBB and URI
Outdoor camera housing can be bough on ebay for 20$. it will protect the BBB and URI from hot and cold temp and the even have place to run the wire in and out of the housing..
http://www.ebay.com/itm/Aluminum-outdoor-Housing-Bracket-with-Heater-Fan-for-CCD-Camera-use-133E-/390980037766?pt=US_Security_Cameras&hash=item5b0839ec86
something like that would do a good job.. 
this will make a ccd camera run all winter long outside..
And this will even prevent humidity to it the box

> From: mike.lussier at gmail.com
> Date: Thu, 20 Nov 2014 17:22:21 -0500
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Frozen repeater
> 
> 
> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
> 
> Sent from an iPhone 5 iOS 8
> 
> Mike.Lussier at gmail.com
> AE4ML at arrl.net
> AE4ML at amsat.org
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141120/7e844d39/attachment.html>

From kb4fxc at inttek.net  Fri Nov 21 05:07:49 2014
From: kb4fxc at inttek.net (David McGough)
Date: Fri, 21 Nov 2014 00:07:49 -0500 (EST)
Subject: [App_rpt-users] Frozen repeater
In-Reply-To: <1E48F314-8548-46CF-99A7-61C7942F03C2@gmail.com>
Message-ID: <Pine.LNX.4.44.1411202341470.14821-100000@goliath.inttek.net>


Hi Mike,

Was the URI green LED flashing (I guess not...)??

I'm rather amazed that the BBB or URI was directly the cause of the 
lock-up, even with really cold conditions. The simplest low-power-budget 
solution to keep this hardware warm is a simple Styrofoam container. 
Even with the minuscule BBB power consumption, Styrofoam should do the 
job fine.

I'll mention here, again, that the ONLY scenarios I've seen where BBB's 
have locked-up were due to 5VDC power woes. I completely stable 5V power 
source is critical. And, the 5VDC regulator might be a source of problems 
in extreme cold, too.

If you don't already have it, I recommend adding a cheap digital 
thermometer to your cabinet that records all-time temperature extremes, 
including time/date. Or, if you want to get fancier, the BBB AllStar 
release already includes support for a USB attached thermometer (see the 
"pcsensor" command) which will log temperature to a file, etc. Note that 
if you decide to go the USB thermometer route, a bug was found in the code 
in the 1.2.1 release. This has already been patched, but, you'll need the 
patch (contact me off list or search the arm-allstar list for more 
details).

Any idea how cold it got and for how long??? And, what is your power 
source??

I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
degrees Fahrenheit) for this weekend. I'll put it in there completely
unprotected.

My problems in the past with such extreme cold have been issues directly
with the radio hardware (like VCO's that unlock, etc.).  This type of
extreme thermal shock can also destroy transmitter PA's, in short order by
cracking ceramic substrates in power modules, etc. (I've got a few of 
those Tee-shirts, too!).

73, David KB4FXC




On Thu, 20 Nov 2014, Michael Lussier wrote:

> 
> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
> 
> Sent from an iPhone 5 iOS 8
> 
> Mike.Lussier at gmail.com
> AE4ML at arrl.net
> AE4ML at amsat.org
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 



From kj6ko at innercite.com  Fri Nov 21 16:34:02 2014
From: kj6ko at innercite.com (KJ6KO)
Date: Fri, 21 Nov 2014 08:34:02 -0800
Subject: [App_rpt-users] Passing DTMF
Message-ID: <ACDBB6B717394056BC33847BACF4439E@KJ6KO>

Is it possible to pass all DTMF locally and not have them pass to or from the network?
Using URI, simpleusb and duplex=2 ?

This is a Link HUB repeater that ties 6 other 900 repeaters together via RF.  

Thanks...
Greg
KJ6KO

www.nc9rs.com  


__________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/30e0c85e/attachment.html>

From kb4fxc at inttek.net  Fri Nov 21 17:00:47 2014
From: kb4fxc at inttek.net (David McGough)
Date: Fri, 21 Nov 2014 12:00:47 -0500 (EST)
Subject: [App_rpt-users] Frozen repeater -- Deep Freeze test
In-Reply-To: <Pine.LNX.4.44.1411202341470.14821-100000@goliath.inttek.net>
Message-ID: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>


Hi Mike (& Everyone),

I ran an "experimental" freezer test over the last 10 hours or so. My test
setup is a "bare" BBB (no case or anything) with URI plugged in, sitting
in a ceramic dinner plate on the 2nd shelf from the top of the
deep-freezer. I'm powering the contraption using an Adafruit 5V2A
wall-wart located outside the freezer, with the small power cord running
thru the freeze door seal.

An uncalibrated analog thermometer inside said about -20 degrees
Fahrenheit just now. The typical range on this thermometer is about -15 or
lower.

I brought an industrial "point and shoot" IR thermometer back from my 
office and checked the BBB at various spots. The CPU/SoC was the warmest 
at about -2 degrees. Other spots ranged as low as -9. When I pointed the 
IR thermometer at my old analog one, the IR said -17 (analog says -20). 
The plate, BBB and thermometer are in the air stream from the freezer 
circulating fan--that should be a worst case scenario!

I'm already getting some dirty looks about "commandeering" the freezer!  
I'll going to conclude this phase of testing before lunch! HiHi!


73, David KB4FXC



On Fri, 21 Nov 2014, David McGough wrote:

> 
> Hi Mike,
> 
> Was the URI green LED flashing (I guess not...)??
> 
> I'm rather amazed that the BBB or URI was directly the cause of the 
> lock-up, even with really cold conditions. The simplest low-power-budget 
> solution to keep this hardware warm is a simple Styrofoam container. 
> Even with the minuscule BBB power consumption, Styrofoam should do the 
> job fine.
> 
> I'll mention here, again, that the ONLY scenarios I've seen where BBB's 
> have locked-up were due to 5VDC power woes. I completely stable 5V power 
> source is critical. And, the 5VDC regulator might be a source of problems 
> in extreme cold, too.
> 
> If you don't already have it, I recommend adding a cheap digital 
> thermometer to your cabinet that records all-time temperature extremes, 
> including time/date. Or, if you want to get fancier, the BBB AllStar 
> release already includes support for a USB attached thermometer (see the 
> "pcsensor" command) which will log temperature to a file, etc. Note that 
> if you decide to go the USB thermometer route, a bug was found in the code 
> in the 1.2.1 release. This has already been patched, but, you'll need the 
> patch (contact me off list or search the arm-allstar list for more 
> details).
> 
> Any idea how cold it got and for how long??? And, what is your power 
> source??
> 
> I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
> degrees Fahrenheit) for this weekend. I'll put it in there completely
> unprotected.
> 
> My problems in the past with such extreme cold have been issues directly
> with the radio hardware (like VCO's that unlock, etc.).  This type of
> extreme thermal shock can also destroy transmitter PA's, in short order by
> cracking ceramic substrates in power modules, etc. (I've got a few of 
> those Tee-shirts, too!).
> 
> 73, David KB4FXC
> 
> 
> 
> 
> On Thu, 20 Nov 2014, Michael Lussier wrote:
> 
> > 
> > I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
> > Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
> > 
> > Sent from an iPhone 5 iOS 8
> > 
> > Mike.Lussier at gmail.com
> > AE4ML at arrl.net
> > AE4ML at amsat.org
> > 
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> > 
> 
> 



From bbrown at byrg.net  Fri Nov 21 17:03:53 2014
From: bbrown at byrg.net (=?UTF-8?B?Qm9iIEJyb3duIC0gV8OYTlFY?=)
Date: Fri, 21 Nov 2014 11:03:53 -0600
Subject: [App_rpt-users] Frozen repeater -- Deep Freeze test
In-Reply-To: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>
References: <Pine.LNX.4.44.1411202341470.14821-100000@goliath.inttek.net>
	<Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>
Message-ID: <CA+WM89a73Dq9T7D78qdyGNcJ6cDdOM7t0P-pS1bZXvcaW8DyFw@mail.gmail.com>

Science at its finest!

--
Thanks in Advance

   Bob Brown, W?NQX

   Kansas City Metro Area

   http://drsm0ke.net

   http://byrg.net

   http://sm0kenet.net

   http://kcdstar.byrg.net

Quis custodiet ipsos custodes?




--

On Fri, Nov 21, 2014 at 11:00 AM, David McGough <kb4fxc at inttek.net> wrote:

>
> Hi Mike (& Everyone),
>
> I ran an "experimental" freezer test over the last 10 hours or so. My test
> setup is a "bare" BBB (no case or anything) with URI plugged in, sitting
> in a ceramic dinner plate on the 2nd shelf from the top of the
> deep-freezer. I'm powering the contraption using an Adafruit 5V2A
> wall-wart located outside the freezer, with the small power cord running
> thru the freeze door seal.
>
> An uncalibrated analog thermometer inside said about -20 degrees
> Fahrenheit just now. The typical range on this thermometer is about -15 or
> lower.
>
> I brought an industrial "point and shoot" IR thermometer back from my
> office and checked the BBB at various spots. The CPU/SoC was the warmest
> at about -2 degrees. Other spots ranged as low as -9. When I pointed the
> IR thermometer at my old analog one, the IR said -17 (analog says -20).
> The plate, BBB and thermometer are in the air stream from the freezer
> circulating fan--that should be a worst case scenario!
>
> I'm already getting some dirty looks about "commandeering" the freezer!
> I'll going to conclude this phase of testing before lunch! HiHi!
>
>
> 73, David KB4FXC
>
>
>
> On Fri, 21 Nov 2014, David McGough wrote:
>
> >
> > Hi Mike,
> >
> > Was the URI green LED flashing (I guess not...)??
> >
> > I'm rather amazed that the BBB or URI was directly the cause of the
> > lock-up, even with really cold conditions. The simplest low-power-budget
> > solution to keep this hardware warm is a simple Styrofoam container.
> > Even with the minuscule BBB power consumption, Styrofoam should do the
> > job fine.
> >
> > I'll mention here, again, that the ONLY scenarios I've seen where BBB's
> > have locked-up were due to 5VDC power woes. I completely stable 5V power
> > source is critical. And, the 5VDC regulator might be a source of problems
> > in extreme cold, too.
> >
> > If you don't already have it, I recommend adding a cheap digital
> > thermometer to your cabinet that records all-time temperature extremes,
> > including time/date. Or, if you want to get fancier, the BBB AllStar
> > release already includes support for a USB attached thermometer (see the
> > "pcsensor" command) which will log temperature to a file, etc. Note that
> > if you decide to go the USB thermometer route, a bug was found in the
> code
> > in the 1.2.1 release. This has already been patched, but, you'll need the
> > patch (contact me off list or search the arm-allstar list for more
> > details).
> >
> > Any idea how cold it got and for how long??? And, what is your power
> > source??
> >
> > I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
> > degrees Fahrenheit) for this weekend. I'll put it in there completely
> > unprotected.
> >
> > My problems in the past with such extreme cold have been issues directly
> > with the radio hardware (like VCO's that unlock, etc.).  This type of
> > extreme thermal shock can also destroy transmitter PA's, in short order
> by
> > cracking ceramic substrates in power modules, etc. (I've got a few of
> > those Tee-shirts, too!).
> >
> > 73, David KB4FXC
> >
> >
> >
> >
> > On Thu, 20 Nov 2014, Michael Lussier wrote:
> >
> > >
> > > I went up on the mountain Wednesday morning. The repeater was powered
> up as well as the BBB. No action from the repeater.
> > > Any thoughts on low power way to keep the BBB and the URI warm ? I can
> use 12vdc
> > >
> > > Sent from an iPhone 5 iOS 8
> > >
> > > Mike.Lussier at gmail.com
> > > AE4ML at arrl.net
> > > AE4ML at amsat.org
> > >
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at ohnosec.org
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> > >
> >
> >
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/776fd069/attachment.html>

From w5jr.lists at gmail.com  Fri Nov 21 17:11:07 2014
From: w5jr.lists at gmail.com (J Roden)
Date: Fri, 21 Nov 2014 12:11:07 -0500
Subject: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 43
In-Reply-To: <mailman.1.1416589203.28319.app_rpt-users@ohnosec.org>
References: <mailman.1.1416589203.28319.app_rpt-users@ohnosec.org>
Message-ID: <5DDCC3FA-D7B5-426E-BD44-E3B1A215B779@gmail.com>

Greg, probably not what you want to hear, but my solution was to use a simple 2 port controller, such as the NHRC4 and tie the AllStar node on the link port. As always , one needs to manage their control codes for unintended commands. 

tnx
Mike

> On Nov 21, 2014, at 12:00 PM, app_rpt-users-request at ohnosec.org wrote:
> 
> Send App_rpt-users mailing list submissions to
>    app_rpt-users at ohnosec.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>    app_rpt-users-request at ohnosec.org
> 
> You can reach the person managing the list at
>    app_rpt-users-owner at ohnosec.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> 
> Today's Topics:
> 
>   1. Frozen repeater (Michael Lussier)
>   2. Re: Frozen repeater (mike at midnighteng.com)
>   3. Re: Frozen repeater (pete M)
>   4. Re: Frozen repeater (David McGough)
>   5. Passing DTMF (KJ6KO)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 20 Nov 2014 17:22:21 -0500
> From: Michael Lussier <mike.lussier at gmail.com>
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] Frozen repeater
> Message-ID: <1E48F314-8548-46CF-99A7-61C7942F03C2 at gmail.com>
> Content-Type: text/plain;    charset=us-ascii
> 
> 
> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
> 
> Sent from an iPhone 5 iOS 8
> 
> Mike.Lussier at gmail.com
> AE4ML at arrl.net
> AE4ML at amsat.org
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Thu, 20 Nov 2014 15:52:00 -0700
> From: <mike at midnighteng.com>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Frozen repeater
> Message-ID:
>    <20141120155200.71befee5dbd13c5325dd1a521b4e73ee.e613fb8f9c.wbe at email06.secureserver.net>
>    
> Content-Type: text/plain; charset="us-ascii"
> 
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141120/ba20f285/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Thu, 20 Nov 2014 18:38:12 -0500
> From: pete M <petem001 at hotmail.com>
> To: Michael Lussier <mike.lussier at gmail.com>, APP RPT
>    <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Frozen repeater
> Message-ID: <BAY176-W158BE79DBD7F76566A720797760 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Hi, it all depend how much power you got.. are you on solar power or wind turbine? or on line power?
> there is  a nice type of housing that you could use for your BBB and URI
> Outdoor camera housing can be bough on ebay for 20$. it will protect the BBB and URI from hot and cold temp and the even have place to run the wire in and out of the housing..
> http://www.ebay.com/itm/Aluminum-outdoor-Housing-Bracket-with-Heater-Fan-for-CCD-Camera-use-133E-/390980037766?pt=US_Security_Cameras&hash=item5b0839ec86
> something like that would do a good job.. 
> this will make a ccd camera run all winter long outside..
> And this will even prevent humidity to it the box
> 
>> From: mike.lussier at gmail.com
>> Date: Thu, 20 Nov 2014 17:22:21 -0500
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Frozen repeater
>> 
>> 
>> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
>> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
>> 
>> Sent from an iPhone 5 iOS 8
>> 
>> Mike.Lussier at gmail.com
>> AE4ML at arrl.net
>> AE4ML at amsat.org
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>                         
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141120/7e844d39/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 4
> Date: Fri, 21 Nov 2014 00:07:49 -0500 (EST)
> From: David McGough <kb4fxc at inttek.net>
> To: Michael Lussier <mike.lussier at gmail.com>
> Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Frozen repeater
> Message-ID:
>    <Pine.LNX.4.44.1411202341470.14821-100000 at goliath.inttek.net>
> Content-Type: TEXT/PLAIN; charset=US-ASCII
> 
> 
> Hi Mike,
> 
> Was the URI green LED flashing (I guess not...)??
> 
> I'm rather amazed that the BBB or URI was directly the cause of the 
> lock-up, even with really cold conditions. The simplest low-power-budget 
> solution to keep this hardware warm is a simple Styrofoam container. 
> Even with the minuscule BBB power consumption, Styrofoam should do the 
> job fine.
> 
> I'll mention here, again, that the ONLY scenarios I've seen where BBB's 
> have locked-up were due to 5VDC power woes. I completely stable 5V power 
> source is critical. And, the 5VDC regulator might be a source of problems 
> in extreme cold, too.
> 
> If you don't already have it, I recommend adding a cheap digital 
> thermometer to your cabinet that records all-time temperature extremes, 
> including time/date. Or, if you want to get fancier, the BBB AllStar 
> release already includes support for a USB attached thermometer (see the 
> "pcsensor" command) which will log temperature to a file, etc. Note that 
> if you decide to go the USB thermometer route, a bug was found in the code 
> in the 1.2.1 release. This has already been patched, but, you'll need the 
> patch (contact me off list or search the arm-allstar list for more 
> details).
> 
> Any idea how cold it got and for how long??? And, what is your power 
> source??
> 
> I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
> degrees Fahrenheit) for this weekend. I'll put it in there completely
> unprotected.
> 
> My problems in the past with such extreme cold have been issues directly
> with the radio hardware (like VCO's that unlock, etc.).  This type of
> extreme thermal shock can also destroy transmitter PA's, in short order by
> cracking ceramic substrates in power modules, etc. (I've got a few of 
> those Tee-shirts, too!).
> 
> 73, David KB4FXC
> 
> 
> 
> 
>> On Thu, 20 Nov 2014, Michael Lussier wrote:
>> 
>> 
>> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
>> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
>> 
>> Sent from an iPhone 5 iOS 8
>> 
>> Mike.Lussier at gmail.com
>> AE4ML at arrl.net
>> AE4ML at amsat.org
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Fri, 21 Nov 2014 08:34:02 -0800
> From: "KJ6KO" <kj6ko at innercite.com>
> To: <App_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] Passing DTMF
> Message-ID: <ACDBB6B717394056BC33847BACF4439E at KJ6KO>
> Content-Type: text/plain; charset="windows-1252"
> 
> Is it possible to pass all DTMF locally and not have them pass to or from the network?
> Using URI, simpleusb and duplex=2 ?
> 
> This is a Link HUB repeater that ties 6 other 900 repeaters together via RF.  
> 
> Thanks...
> Greg
> KJ6KO
> 
> www.nc9rs.com  
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20141121/30e0c85e/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 43
> *********************************************


From mike.lussier at gmail.com  Fri Nov 21 17:16:09 2014
From: mike.lussier at gmail.com (Michael Lussier)
Date: Fri, 21 Nov 2014 12:16:09 -0500
Subject: [App_rpt-users] Frozen repeater -- Deep Freeze test
In-Reply-To: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>
References: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>
Message-ID: <622507ED-39FD-443E-B1ED-39607D6E9CF3@gmail.com>

Nice ! 

Sent from an iPhone 5 iOS 8

Mike.Lussier at gmail.com
AE4ML at arrl.net
AE4ML at amsat.org




> On Nov 21, 2014, at 12:00, David McGough <kb4fxc at inttek.net> wrote:
> 
> 
> Hi Mike (& Everyone),
> 
> I ran an "experimental" freezer test over the last 10 hours or so. My test
> setup is a "bare" BBB (no case or anything) with URI plugged in, sitting
> in a ceramic dinner plate on the 2nd shelf from the top of the
> deep-freezer. I'm powering the contraption using an Adafruit 5V2A
> wall-wart located outside the freezer, with the small power cord running
> thru the freeze door seal.
> 
> An uncalibrated analog thermometer inside said about -20 degrees
> Fahrenheit just now. The typical range on this thermometer is about -15 or
> lower.
> 
> I brought an industrial "point and shoot" IR thermometer back from my 
> office and checked the BBB at various spots. The CPU/SoC was the warmest 
> at about -2 degrees. Other spots ranged as low as -9. When I pointed the 
> IR thermometer at my old analog one, the IR said -17 (analog says -20). 
> The plate, BBB and thermometer are in the air stream from the freezer 
> circulating fan--that should be a worst case scenario!
> 
> I'm already getting some dirty looks about "commandeering" the freezer!  
> I'll going to conclude this phase of testing before lunch! HiHi!
> 
> 
> 73, David KB4FXC
> 
> 
> 
>> On Fri, 21 Nov 2014, David McGough wrote:
>> 
>> 
>> Hi Mike,
>> 
>> Was the URI green LED flashing (I guess not...)??
>> 
>> I'm rather amazed that the BBB or URI was directly the cause of the 
>> lock-up, even with really cold conditions. The simplest low-power-budget 
>> solution to keep this hardware warm is a simple Styrofoam container. 
>> Even with the minuscule BBB power consumption, Styrofoam should do the 
>> job fine.
>> 
>> I'll mention here, again, that the ONLY scenarios I've seen where BBB's 
>> have locked-up were due to 5VDC power woes. I completely stable 5V power 
>> source is critical. And, the 5VDC regulator might be a source of problems 
>> in extreme cold, too.
>> 
>> If you don't already have it, I recommend adding a cheap digital 
>> thermometer to your cabinet that records all-time temperature extremes, 
>> including time/date. Or, if you want to get fancier, the BBB AllStar 
>> release already includes support for a USB attached thermometer (see the 
>> "pcsensor" command) which will log temperature to a file, etc. Note that 
>> if you decide to go the USB thermometer route, a bug was found in the code 
>> in the 1.2.1 release. This has already been patched, but, you'll need the 
>> patch (contact me off list or search the arm-allstar list for more 
>> details).
>> 
>> Any idea how cold it got and for how long??? And, what is your power 
>> source??
>> 
>> I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
>> degrees Fahrenheit) for this weekend. I'll put it in there completely
>> unprotected.
>> 
>> My problems in the past with such extreme cold have been issues directly
>> with the radio hardware (like VCO's that unlock, etc.).  This type of
>> extreme thermal shock can also destroy transmitter PA's, in short order by
>> cracking ceramic substrates in power modules, etc. (I've got a few of 
>> those Tee-shirts, too!).
>> 
>> 73, David KB4FXC
>> 
>> 
>> 
>> 
>>> On Thu, 20 Nov 2014, Michael Lussier wrote:
>>> 
>>> 
>>> I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
>>> Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
>>> 
>>> Sent from an iPhone 5 iOS 8
>>> 
>>> Mike.Lussier at gmail.com
>>> AE4ML at arrl.net
>>> AE4ML at amsat.org
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 


From w5jr.lists at gmail.com  Fri Nov 21 17:44:01 2014
From: w5jr.lists at gmail.com (J Roden)
Date: Fri, 21 Nov 2014 12:44:01 -0500
Subject: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 44
In-Reply-To: <mailman.2391.1416589867.369.app_rpt-users@ohnosec.org>
References: <mailman.2391.1416589867.369.app_rpt-users@ohnosec.org>
Message-ID: <BF878614-A919-40E9-A0DD-E4BAD46F06F6@gmail.com>

Wow, I need to do some trimming next time (this time)!!

tnx
Mike

> 


From kb4fxc at inttek.net  Fri Nov 21 18:01:20 2014
From: kb4fxc at inttek.net (David McGough)
Date: Fri, 21 Nov 2014 13:01:20 -0500 (EST)
Subject: [App_rpt-users] Frozen repeater -- BBB Hardware Watchdog
In-Reply-To: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>
Message-ID: <Pine.LNX.4.44.1411211255230.14416-100000@goliath.inttek.net>


BTW, one more thought. The 1.2.1 BBB release also includes some code to 
activate a Hardware Watchdog. This is not activated by default, but, 
might help. The watchdog resets the BBB, if a lockup is detected.

To activate the watchdog, uncomment a line near the top of the
/etc/rc.local file. There is a comment in the rc.local file, too. After
un-commenting, a reboot will be required (or you can start the watchdog
code from the command prompt, etc.).

73, David KB4FXC




From kj6ko at innercite.com  Fri Nov 21 18:14:16 2014
From: kj6ko at innercite.com (KJ6KO)
Date: Fri, 21 Nov 2014 10:14:16 -0800
Subject: [App_rpt-users] DTMF pass
References: <43EF0C456563487E9561A7699D343B09@KJ6KO>
	<001401d00569$3542a750$9fc7f5f0$@rr.com>
Message-ID: <770C664A0CB24FFF8160F00878FA7E9D@KJ6KO>

How about this...completely unmuting DTMF?  Is that possible?  
I can disconnect from all links when running local commands, then mute it when done and reconnect.

What do these do?



;propagate_dtmf	= yes			; DTMF sent to system from link gets
					; repeated onto main system output (optional)
;propagate_phonedtmf = yes		; DTMF sent to system from phone gets
					; repeated into main system output and
					; link outputs (optional)
;linktolink = yes			; disables forcing physical half-duplex
					; operation of main repeater while
					; still keeping half-duplex semantics
					; (optional)
;inxlat = #456,#457,0123456789ABCD 	; translate digit strings inbound,
					; in this case intrepret #456 as star,
					; #457 as pound, and pass all the other
					; chars listed in arg3 (optional)
;outxlat = *7,*0,0123456789#ABCD	; translate digit string outbound,
					; in this case *7 generates star, *0
					; generates pound, and all the other
					; digits pass along----- Original Message ----- 
  From: k5tra 
  To: 'KJ6KO' 
  Sent: Friday, November 21, 2014 12:57 AM
  Subject: RE: DTMF pass


  'Don't know off the top. It would have to be in Allstar. It is possible to have preset DTMF strings be sent.

  Tom

   

  From: KJ6KO [mailto:kj6ko at innercite.com] 
  Sent: Thursday, November 20, 2014 5:19 PM
  To: tom
  Subject: DTMF pass

   

  Is there a setting on a URI in full duplex mode that will allow it to pass DTMF locally but not through the internet?



  __________ Information from ESET NOD32 Antivirus, version of virus signature database 10756 (20141120) __________

  The message was checked by ESET NOD32 Antivirus.

  http://www.eset.com



  __________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________

  The message was checked by ESET NOD32 Antivirus.

  http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/bc14534e/attachment.html>

From doug at crompton.com  Fri Nov 21 18:28:06 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 21 Nov 2014 13:28:06 -0500
Subject: [App_rpt-users] Frozen repeater -- BBB Hardware Watchdog
In-Reply-To: <Pine.LNX.4.44.1411211255230.14416-100000@goliath.inttek.net>
References: <Pine.LNX.4.44.1411211128050.14416-100000@goliath.inttek.net>,
	<Pine.LNX.4.44.1411211255230.14416-100000@goliath.inttek.net>
Message-ID: <BLU172-W148852A99D46B100A6A3E8BA770@phx.gbl>

This would apply to the 1.1 version but NOT the 1.2.1 version.

The users method of activating and deactivating many events and services has changed in 1.2.1

To activate the watchdog simply edit  /usr/local/etc/allstar.env and 

# defines the watchdog timer (enabled or disabled)
# default="disabled"

export WATCHDOG="disabled"

Make the WATCHDOG parameter "enable" and reboot.

Do not change anything in rc.local or rc.allstar
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Fri, 21 Nov 2014 13:01:20 -0500
> From: kb4fxc at inttek.net
> To: mike.lussier at gmail.com
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Frozen repeater -- BBB Hardware Watchdog
> 
> 
> BTW, one more thought. The 1.2.1 BBB release also includes some code to 
> activate a Hardware Watchdog. This is not activated by default, but, 
> might help. The watchdog resets the BBB, if a lockup is detected.
> 
> To activate the watchdog, uncomment a line near the top of the
> /etc/rc.local file. There is a comment in the rc.local file, too. After
> un-commenting, a reboot will be required (or you can start the watchdog
> code from the command prompt, etc.).
> 
> 73, David KB4FXC
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/a19378a3/attachment.html>

From n3fe at repeater.net  Fri Nov 21 18:29:58 2014
From: n3fe at repeater.net (Corey Dean)
Date: Fri, 21 Nov 2014 13:29:58 -0500
Subject: [App_rpt-users] DTMF pass
In-Reply-To: <770C664A0CB24FFF8160F00878FA7E9D@KJ6KO>
References: <43EF0C456563487E9561A7699D343B09@KJ6KO>
	<001401d00569$3542a750$9fc7f5f0$@rr.com>
	<770C664A0CB24FFF8160F00878FA7E9D@KJ6KO>
Message-ID: <AA7637FE-7E6D-418C-BDBB-ED670C3176BC@repeater.net>

I had ask for this years ago and at the time it wasn't available and people didn't like the idea.  I agree though...  It would be a nice feature to have!

Sent from my iPhone

> On Nov 21, 2014, at 1:14 PM, "KJ6KO" <kj6ko at innercite.com> wrote:
> 
> How about this...completely unmuting DTMF?  Is that possible? 
> I can disconnect from all links when running local commands, then mute it when done and reconnect.
>  
> What do these do?
>  
>  
>  
> ;propagate_dtmf	= yes			; DTMF sent to system from link gets
> 					; repeated onto main system output (optional)
> ;propagate_phonedtmf = yes		; DTMF sent to system from phone gets
> 					; repeated into main system output and
> 					; link outputs (optional)
> ;linktolink = yes			; disables forcing physical half-duplex
> 					; operation of main repeater while
> 					; still keeping half-duplex semantics
> 					; (optional)
> ;inxlat = #456,#457,0123456789ABCD 	; translate digit strings inbound,
> 					; in this case intrepret #456 as star,
> 					; #457 as pound, and pass all the other
> 					; chars listed in arg3 (optional)
> ;outxlat = *7,*0,0123456789#ABCD	; translate digit string outbound,
> 					; in this case *7 generates star, *0
> 					; generates pound, and all the other
> 					; digits pass along
> ----- Original Message -----
> From: k5tra
> To: 'KJ6KO'
> Sent: Friday, November 21, 2014 12:57 AM
> Subject: RE: DTMF pass
> 
> ?Don?t know off the top. It would have to be in Allstar. It is possible to have preset DTMF strings be sent.
> Tom
>  
> From: KJ6KO [mailto:kj6ko at innercite.com] 
> Sent: Thursday, November 20, 2014 5:19 PM
> To: tom
> Subject: DTMF pass
>  
> Is there a setting on a URI in full duplex mode that will allow it to pass DTMF locally but not through the internet?
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 10756 (20141120) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus signature database 10761 (20141121) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/a57c2c57/attachment.html>

From k5tra at austin.rr.com  Fri Nov 21 18:33:09 2014
From: k5tra at austin.rr.com (k5tra)
Date: Fri, 21 Nov 2014 12:33:09 -0600
Subject: [App_rpt-users] Passing DTMF
Message-ID: <005f01d005b9$99e38da0$cdaaa8e0$@rr.com>

Greg,

The only way that I know of is to explicitly build functions with cop,48 for
each DTMF command that you might want to send. When that function is called
(via DTMF), the desired DTMF string will be heard.

Tom / K5TRA 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/f3b9ff40/attachment.html>

From kb4fxc at inttek.net  Fri Nov 21 18:33:14 2014
From: kb4fxc at inttek.net (David McGough)
Date: Fri, 21 Nov 2014 13:33:14 -0500 (EST)
Subject: [App_rpt-users] Frozen repeater -- BBB Hardware Watchdog
In-Reply-To: <BLU172-W148852A99D46B100A6A3E8BA770@phx.gbl>
Message-ID: <Pine.LNX.4.44.1411211332440.20991-100000@goliath.inttek.net>



Ah, correct!


On Fri, 21 Nov 2014, Doug Crompton wrote:

> This would apply to the 1.1 version but NOT the 1.2.1 version.
> 
> The users method of activating and deactivating many events and services has changed in 1.2.1
> 
> To activate the watchdog simply edit  /usr/local/etc/allstar.env and 
> 
> # defines the watchdog timer (enabled or disabled)
> # default="disabled"
> 
> export WATCHDOG="disabled"
> 
> Make the WATCHDOG parameter "enable" and reboot.
> 
> Do not change anything in rc.local or rc.allstar
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
> 
> 
> > Date: Fri, 21 Nov 2014 13:01:20 -0500
> > From: kb4fxc at inttek.net
> > To: mike.lussier at gmail.com
> > CC: app_rpt-users at ohnosec.org
> > Subject: Re: [App_rpt-users] Frozen repeater -- BBB Hardware Watchdog
> > 
> > 
> > BTW, one more thought. The 1.2.1 BBB release also includes some code to 
> > activate a Hardware Watchdog. This is not activated by default, but, 
> > might help. The watchdog resets the BBB, if a lockup is detected.
> > 
> > To activate the watchdog, uncomment a line near the top of the
> > /etc/rc.local file. There is a comment in the rc.local file, too. After
> > un-commenting, a reboot will be required (or you can start the watchdog
> > code from the command prompt, etc.).
> > 
> > 73, David KB4FXC
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> > 
>  		 	   		  



From doug at crompton.com  Fri Nov 21 18:33:53 2014
From: doug at crompton.com (Doug Crompton)
Date: Fri, 21 Nov 2014 13:33:53 -0500
Subject: [App_rpt-users] Frozen repeater
In-Reply-To: <Pine.LNX.4.44.1411202341470.14821-100000@goliath.inttek.net>
References: <1E48F314-8548-46CF-99A7-61C7942F03C2@gmail.com>,
	<Pine.LNX.4.44.1411202341470.14821-100000@goliath.inttek.net>
Message-ID: <BLU172-W10D2B5BA181F6A85D02E7CBA770@phx.gbl>

Mike,

 I may have missed your response to Dave about what condition you found the system in when it was not working. Was the blue heartbeat LED blinking on the BBB? Was the Green light blinking on the USB FOB? Did you have ssh access to the BBB?

Based on Dave's tests it appears there may have been something else going on here. 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Fri, 21 Nov 2014 00:07:49 -0500
> From: kb4fxc at inttek.net
> To: mike.lussier at gmail.com
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Frozen repeater
> 
> 
> Hi Mike,
> 
> Was the URI green LED flashing (I guess not...)??
> 
> I'm rather amazed that the BBB or URI was directly the cause of the 
> lock-up, even with really cold conditions. The simplest low-power-budget 
> solution to keep this hardware warm is a simple Styrofoam container. 
> Even with the minuscule BBB power consumption, Styrofoam should do the 
> job fine.
> 
> I'll mention here, again, that the ONLY scenarios I've seen where BBB's 
> have locked-up were due to 5VDC power woes. I completely stable 5V power 
> source is critical. And, the 5VDC regulator might be a source of problems 
> in extreme cold, too.
> 
> If you don't already have it, I recommend adding a cheap digital 
> thermometer to your cabinet that records all-time temperature extremes, 
> including time/date. Or, if you want to get fancier, the BBB AllStar 
> release already includes support for a USB attached thermometer (see the 
> "pcsensor" command) which will log temperature to a file, etc. Note that 
> if you decide to go the USB thermometer route, a bug was found in the code 
> in the 1.2.1 release. This has already been patched, but, you'll need the 
> patch (contact me off list or search the arm-allstar list for more 
> details).
> 
> Any idea how cold it got and for how long??? And, what is your power 
> source??
> 
> I'm preparing to put a "test" BBB and URI in my deep-freezer (about -15
> degrees Fahrenheit) for this weekend. I'll put it in there completely
> unprotected.
> 
> My problems in the past with such extreme cold have been issues directly
> with the radio hardware (like VCO's that unlock, etc.).  This type of
> extreme thermal shock can also destroy transmitter PA's, in short order by
> cracking ceramic substrates in power modules, etc. (I've got a few of 
> those Tee-shirts, too!).
> 
> 73, David KB4FXC
> 
> 
> 
> 
> On Thu, 20 Nov 2014, Michael Lussier wrote:
> 
> > 
> > I went up on the mountain Wednesday morning. The repeater was powered up as well as the BBB. No action from the repeater. 
> > Any thoughts on low power way to keep the BBB and the URI warm ? I can use 12vdc 
> > 
> > Sent from an iPhone 5 iOS 8
> > 
> > Mike.Lussier at gmail.com
> > AE4ML at arrl.net
> > AE4ML at amsat.org
> > 
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> > 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141121/1eda058f/attachment.html>

From rpt2 at chuck.midlandsnetworking.com  Sun Nov 23 14:49:59 2014
From: rpt2 at chuck.midlandsnetworking.com (Chuck Henderson)
Date: Sun, 23 Nov 2014 08:49:59 -0600
Subject: [App_rpt-users] non SSL access to allstarlink.org
In-Reply-To: <fc5a77a3-b4ab-4aef-b90c-68d13633dc23@email.android.com>
References: <5468D431.2090009@bryanfields.net>
	<BLU180-W5579453DB1324C40EDDE8CB18A0@phx.gbl>
	<WM!fae9c83b74e6d36cd80dde43e2bdb4e37a33d2ab8478f8daae3b86cf87d2495c7219678cdd6e17ca1d74fd1345c47ecb!@asav-3.01.com>
	<fc5a77a3-b4ab-4aef-b90c-68d13633dc23@email.android.com>
Message-ID: <CADEYVwi5PkNSM09hB5wjFvzZ4ZkJosMxXV2oOKQjgpV2_a=6EA@mail.gmail.com>

I don't think it applies to this.  The encryption is not being used to hide
the content from the government.  The government has full access to read
the content.  The only requirement is they must capture the session from
the start and they must have access to a one million dollar device that I
have had access to.  I know that they have that.  In this case the
encryption is only to verify the communication is authentic and to prevent
unauthorized persons, other than the government, from breaking into the
system.  At least, that is my story and I am sticking to it.
Chuck

On Sun, Nov 16, 2014 at 10:56 AM, Bryan Fields <bryan at bryanfields.net>
wrote:

> We can't do encryption over amateur radio, so when accessing it from my
> ham radio 3400 mhz network it's technically a rule violation.
>
> On November 16, 2014 11:54:10 AM EST, Jim Duuuude <telesistant at hotmail.com>
> wrote:
>>
>> No, why?
>>
>> > Date: Sun, 16 Nov 2014 11:43:29 -0500
>> > From: Bryan at bryanfields.net
>> > To: app_rpt-users at ohnosec.org
>> > Subject: [App_rpt-users] non SSL access to allstarlink.org
>> >
>> > Is there a url I can use to access this that does not redirect to the
>> SSL server?
>> >
>> > Thank you,
>> >
>> > --
>> > Bryan Fields
>> >
>> > 727-409-1194 - Voice
>> > 727-214-2508 - Fax
>> > http://bryanfields.net
>> >
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> > You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> --
> Bryan Fields
> 727-409-1194
> http://bryanfields.net
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141123/f79ad9e5/attachment.html>

From mike at midnighteng.com  Sun Nov 23 20:17:05 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Sun, 23 Nov 2014 13:17:05 -0700
Subject: [App_rpt-users] =?utf-8?q?non_SSL_access_to_allstarlink=2Eorg?=
Message-ID: <20141123131705.71befee5dbd13c5325dd1a521b4e73ee.47f870506d.wbe@email06.secureserver.net>


Bryan, 

I don't think you will have much luck with non SSL unless the host
provides for it and that breaks the reason for using it. Message me
direct on exactly what you are trying to achieve. It should be doable
with SSL.

Chuck,

I think if you look closer, you will find that SSL is a method to say
the "route" between the server and the end user is authentic and can
only be used by that user in session.

Much like the now infamous police use of sting-ray 2 is to cell phones
interception. Putting yourself in the middle of data streams gives you
complete access to the data without detection.

In the beginning of e-commerce in the 90's and early 2000's, folks would
insert themselves in the path of all data and transactions and
intercept/record strings of data including Name, Address, CC #'s and SS
#'s with automated scripts and transparent to either end because all the
data would transpire as normal through them. 

SSL was the answer to that. With the use of encryption keys, they might
get the data but can't make any sense of it, hence, useless. 
Cell phones have the same type of security but can also be spoofed into
giving up the keys to a hacker that knows how it's done.

Just a personal note/fyi: 
Just because the government spends $1M on a device to snoop, it does not
mean that the same thing can't be done by a better than average hacker
for $1K. The $1M amount does not impress me, the $1K amount does.

The Harris Sting-Ray 2 cost the local law enforcement about $35K ea and
they get Homeland Defense Grant Money to purchase them to snoop on cell
phones.

But with a PC, software and a few pieces of $300 hardware, you can do
the same thing and be more flexible about how you do it. 

Now we have unknown snoopers near Wall Street and around Washington DC
and corporate HQ's and has been going on for many years. Now there are
10's of thousands of taxpayer paid devices out there and no log of the
use of them to know they are not being used for political snooping
purposes or personal monetary gain of the police officer who has access
to one. Part of the reason for Apple and Google's new encryption for
cell phones that is similar to SSL.


...mike/kb8jnm


-------- Original Message --------
Subject: Re: [App_rpt-users] non SSL access to allstarlink.org
From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
Date: Sun, November 23, 2014 9:49 am
To: Bryan Fields <bryan at bryanfields.net>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>

I don't think it applies to this.  The encryption is not being used to
hide the content from the government.  The government has full access to
read the content.  The only requirement is they must capture the session
from the start and they must have access to a one million dollar device
that I have had access to.  I know that they have that.  In this case
the encryption is only to verify the communication is authentic and to
prevent unauthorized persons, other than the government, from breaking
into the system.  At least, that is my story and I am sticking to
it.Chuck


On Sun, Nov 16, 2014 at 10:56 AM, Bryan Fields <bryan at bryanfields.net>
wrote:
We can't do encryption over amateur radio, so when accessing it from my
ham radio 3400 mhz network it's technically a rule violation. 

On November 16, 2014 11:54:10 AM EST, Jim Duuuude
<telesistant at hotmail.com> wrote: No, why?

> Date: Sun, 16 Nov 2014 11:43:29 -0500
> From: Bryan at bryanfields.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] non SSL access to allstarlink.org
> 
> Is there a url I can use to access this that does not redirect to the SSL server?
> 
> Thank you,
> 
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 






--
 Bryan Fields
 727-409-1194
 http://bryanfields.net

_______________________________________________
 App_rpt-users mailing list
 App_rpt-users at ohnosec.org
 http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
 To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
 You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem. 



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.


From ajp26 at buffalo.edu  Mon Nov 24 15:50:54 2014
From: ajp26 at buffalo.edu (Pawlowski, Adam)
Date: Mon, 24 Nov 2014 15:50:54 +0000
Subject: [App_rpt-users] non SSL access to allstarlink.org (Chuck
	Henderson)
Message-ID: <AEB16C1BF994004E90A436C0CC62287F155F5052@mb-ls3.itorg.ad.buffalo.edu>

Can you run a reverse proxy or something similar that retrieves the data securely over your internet connection, and provides it to you without that encryption?


> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 23 Nov 2014 08:49:59 -0600
> From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
> To: Bryan Fields <bryan at bryanfields.net>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] non SSL access to allstarlink.org
> Message-ID:
> 	<CADEYVwi5PkNSM09hB5wjFvzZ4ZkJosMxXV2oOKQjgpV2_a=6EA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> I don't think it applies to this.  The encryption is not being used to
> hide the content from the government.  The government has full access to
> read the content.  The only requirement is they must capture the session
> from the start and they must have access to a one million dollar device
> that I have had access to.  I know that they have that.  In this case the
> encryption is only to verify the communication is authentic and to prevent
> unauthorized persons, other than the government, from breaking into the
> system.  At least, that is my story and I am sticking to it.
> Chuck
> 
> On Sun, Nov 16, 2014 at 10:56 AM, Bryan Fields <bryan at bryanfields.net>
> wrote:
> 
> > We can't do encryption over amateur radio, so when accessing it from
> > my ham radio 3400 mhz network it's technically a rule violation.
> >
> > On November 16, 2014 11:54:10 AM EST, Jim Duuuude
> > <telesistant at hotmail.com>
> > wrote:
> >>
> >> No, why?
> >>
> >> > Date: Sun, 16 Nov 2014 11:43:29 -0500
> >> > From: Bryan at bryanfields.net
> >> > To: app_rpt-users at ohnosec.org
> >> > Subject: [App_rpt-users] non SSL access to allstarlink.org
> >> >
> >> > Is there a url I can use to access this that does not redirect to
> >> > the
> >> SSL server?
> >> >
> >> > Thank you,
> >> >
> >> > --
> >> > Bryan Fields
> >> >
> >> > 727-409-1194 - Voice
> >> > 727-214-2508 - Fax
> >> > http://bryanfields.net
> >> >
> >> > _______________________________________________
> >> > App_rpt-users mailing list
> >> > App_rpt-users at ohnosec.org
> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >
> >> > To unsubscribe from this list please visit
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> >> down to the bottom of the page. Enter your email address and press
> >> the "Unsubscribe or edit options button"
> >> > You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a
> >> message to the list detailing the problem.
> >>
> >
> > --
> > Bryan Fields
> > 727-409-1194
> > http://bryanfields.net
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > down to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message
> > to the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-
> users/attachments/20141123/f79ad9e5/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 47
> *********************************************



From mike at midnighteng.com  Mon Nov 24 16:35:17 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Mon, 24 Nov 2014 09:35:17 -0700
Subject: [App_rpt-users]
 =?utf-8?q?non_SSL_access_to_allstarlink=2Eorg_=28?=
 =?utf-8?q?Chuck_Henderson=29?=
Message-ID: <20141124093517.71befee5dbd13c5325dd1a521b4e73ee.61654fd7c1.wbe@email06.secureserver.net>



For those that are writing there own scripts for use in asterisk/app_rpt
and are wanting to access a ssl page in use of that. 

You can use a AGI script and whatever your flavor program lang inside of
that to emulate a browser (i suggest chrome) using html,php,json to sort
and "pipe" that HTTPS output to your other scripts.
You should be able to do it all in AGI but I guess that depends on what
you are doing. 


That is the basics of how it is done with one method. There are others.


To much how-to for a email. Google can be your friend (sometimes).

...mike/kb8jnm


-------- Original Message --------
Subject: Re: [App_rpt-users] non SSL access to allstarlink.org (Chuck
Henderson)
From: "Pawlowski, Adam" <ajp26 at buffalo.edu>
Date: Mon, November 24, 2014 10:50 am
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>

Can you run a reverse proxy or something similar that retrieves the data
securely over your internet connection, and provides it to you without
that encryption?


> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sun, 23 Nov 2014 08:49:59 -0600
> From: Chuck Henderson <rpt2 at chuck.midlandsnetworking.com>
> To: Bryan Fields <bryan at bryanfields.net>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] non SSL access to allstarlink.org
> Message-ID:
> <CADEYVwi5PkNSM09hB5wjFvzZ4ZkJosMxXV2oOKQjgpV2_a=6EA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> I don't think it applies to this. The encryption is not being used to
> hide the content from the government. The government has full access to
> read the content. The only requirement is they must capture the session
> from the start and they must have access to a one million dollar device
> that I have had access to. I know that they have that. In this case the
> encryption is only to verify the communication is authentic and to prevent
> unauthorized persons, other than the government, from breaking into the
> system. At least, that is my story and I am sticking to it.
> Chuck
> 
> On Sun, Nov 16, 2014 at 10:56 AM, Bryan Fields <bryan at bryanfields.net>
> wrote:
> 
> > We can't do encryption over amateur radio, so when accessing it from
> > my ham radio 3400 mhz network it's technically a rule violation.
> >
> > On November 16, 2014 11:54:10 AM EST, Jim Duuuude
> > <telesistant at hotmail.com>
> > wrote:
> >>
> >> No, why?
> >>
> >> > Date: Sun, 16 Nov 2014 11:43:29 -0500
> >> > From: Bryan at bryanfields.net
> >> > To: app_rpt-users at ohnosec.org
> >> > Subject: [App_rpt-users] non SSL access to allstarlink.org
> >> >
> >> > Is there a url I can use to access this that does not redirect to
> >> > the
> >> SSL server?
> >> >
> >> > Thank you,
> >> >
> >> > --
> >> > Bryan Fields
> >> >
> >> > 727-409-1194 - Voice
> >> > 727-214-2508 - Fax
> >> > http://bryanfields.net
> >> >
> >> > _______________________________________________
> >> > App_rpt-users mailing list
> >> > App_rpt-users at ohnosec.org
> >> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >> >
> >> > To unsubscribe from this list please visit
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> >> down to the bottom of the page. Enter your email address and press
> >> the "Unsubscribe or edit options button"
> >> > You do not need a password to unsubscribe, you can do it via email
> >> confirmation. If you have trouble unsubscribing, please send a
> >> message to the list detailing the problem.
> >>
> >
> > --
> > Bryan Fields
> > 727-409-1194
> > http://bryanfields.net
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > down to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message
> > to the list detailing the problem.
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://ohnosec.org/pipermail/app_rpt-
> users/attachments/20141123/f79ad9e5/attachment-0001.html>
> 
> ------------------------------
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 
> End of App_rpt-users Digest, Vol 69, Issue 47
> *********************************************

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.


From apprptusers at westbrook.com  Mon Nov 24 16:42:07 2014
From: apprptusers at westbrook.com (K5BFC)
Date: Mon, 24 Nov 2014 09:42:07 -0700
Subject: [App_rpt-users] non SSL access to allstarlink.org (Chuck
	Henderson)
In-Reply-To: <AEB16C1BF994004E90A436C0CC62287F155F5052@mb-ls3.itorg.ad.buffalo.edu>
References: <AEB16C1BF994004E90A436C0CC62287F155F5052@mb-ls3.itorg.ad.buffalo.edu>
Message-ID: <CAEC9y9HKriWOzw35h3aTAuY9KHk1ZficGawfW8=QQTKvBGgWdg@mail.gmail.com>

You could also use socat, by seasoning something like this to taste:

socat TCP4-LISTEN:6666,bind=127.0.0.1 OPENSSL:www.example.com:443

$0.02,
Eric
K5BFC

On Mon, Nov 24, 2014 at 8:50 AM, Pawlowski, Adam <ajp26 at buffalo.edu> wrote:

> Can you run a reverse proxy or something similar that retrieves the data
> securely over your internet connection, and provides it to you without that
> encryption?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141124/fe6d7c56/attachment.html>

From Bryan at bryanfields.net  Tue Nov 25 01:07:58 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Mon, 24 Nov 2014 20:07:58 -0500
Subject: [App_rpt-users] custom node announcement?
Message-ID: <5473D66E.8000205@bryanfields.net>

Where can I upload a custom announcement recording for one of my nodes in the
portal page?

Or if not there how can I do this?

Thanks,

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net



From doug at crompton.com  Tue Nov 25 04:27:33 2014
From: doug at crompton.com (Doug Crompton)
Date: Mon, 24 Nov 2014 23:27:33 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <5473D66E.8000205@bryanfields.net>
References: <5473D66E.8000205@bryanfields.net>
Message-ID: <BLU172-W1559698C5921084475F8E4BA730@phx.gbl>

I am not sure what a custom node announcement would have to do with the "portal" page. You create an announcement and store it on the node from where you want to make the announcement and then use localplay or playback to play the file either manually via a DTMF command or keyboard entry or timed via a cron entry. 

The announcement could be a wav or gsm file using Alison or a text to speech generator or you own voice. It just must comply with the 8K sample rate. You can convert files using sox.

Do you need more info on specifically how to do this? 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Mon, 24 Nov 2014 20:07:58 -0500
> From: Bryan at bryanfields.net
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] custom node announcement?
> 
> Where can I upload a custom announcement recording for one of my nodes in the
> portal page?
> 
> Or if not there how can I do this?
> 
> Thanks,
> 
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141124/dd279a84/attachment.html>

From mike at midnighteng.com  Tue Nov 25 04:37:28 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Mon, 24 Nov 2014 21:37:28 -0700
Subject: [App_rpt-users] =?utf-8?q?custom_node_announcement=3F?=
Message-ID: <20141124213728.71befee5dbd13c5325dd1a521b4e73ee.cf86d98480.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141124/d1999e84/attachment.html>

From Bryan at bryanfields.net  Tue Nov 25 06:05:09 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Tue, 25 Nov 2014 01:05:09 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <WM!0cc1e07bfe0179331ce767eb9a108d8cf42c769de7d7a9a2e959adc410be5ef3c2470531eb51961cbfcbebbc448c9e23!@asav-3.01.com>
References: <20141124213728.71befee5dbd13c5325dd1a521b4e73ee.cf86d98480.wbe@email06.secureserver.net>
	<WM!0cc1e07bfe0179331ce767eb9a108d8cf42c769de7d7a9a2e959adc410be5ef3c2470531eb51961cbfcbebbc448c9e23!@asav-3.01.com>
Message-ID: <54741C15.2040802@bryanfields.net>

On 11/24/14, 11:37 PM, mike at midnighteng.com wrote:
> 
> Bryan,
> 
> I think you need to do that in your node,
> 
> in extensions.conf
> 
> [radio-control]
> exten => 29261,1,Answer
> exten => 29261,n,Wait(2)
> exten => 29261,n,Playback(/path/to/file.gsm)    ;<<<<<<<<<<<<<<<<<<<<<<<<<<<
> exten => 29261,n,Rpt,29261|P
> 
> Adjust as needed but use
> Playback(/path/to/file.gsm)   -before the actual connection is made to node

I'm asking about the node announcements in
/var/lib/asterisk/sounds/rpt/nodenames
these override the number readouts if they exist.

I've made some custom ones I'm using for my node, and the rc.updatenodelist
script looks to rsync these from the allstar server.  Unless asterisk can push
these files some how, I don't think this is what I need.

Thanks,
-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net


From steve at donegan.org  Tue Nov 25 18:26:34 2014
From: steve at donegan.org (Steven Donegan)
Date: Tue, 25 Nov 2014 18:26:34 +0000 (UTC)
Subject: [App_rpt-users] Fw: Weekly Vulnerability Summary - Nov 24 2014
In-Reply-To: <20141122235817.114E01900B4@alertdistribution.com>
References: <20141122235817.114E01900B4@alertdistribution.com>
Message-ID: <2020497875.893499.1416939994416.JavaMail.yahoo@jws106126.mail.bf1.yahoo.com>

Lots of Asterisk vulnerabilities in this summary :-(?____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

    ----- Forwarded Message -----
  From: SecurityTracker <newsletters at SECURITYTRACKER.COM>
 To: SECURITYTRACKER-WEEKLY-ALL at PEACH.EASE.LSOFT.COM 
 Sent: Monday, November 24, 2014 1:10 AM
 Subject: Weekly Vulnerability Summary - Nov 24 2014
   
SecurityTracker Monday Morning Vulnerability Summary - Nov 24 2014
http://www.securitytracker.com
 


If you run a web site and would like to publish SecurityTracker
vulnerability headlines on your web site for free, then join our
Affiliate Program:
http://securitytracker.com/affiliate/affiliate_signup.html


Subscriptions to this newsletter are available for free.? Just visit
our web site to sign up:
http://www.securitytracker.com/signup/signup_now.html


 
------------------------------------------------------------------------
? ? ? ? ? In This Week's SecurityTracker Vulnerability Summary
 
SecurityTracker Alerts: 22
 
Vendors:? Apple Computer - Cisco - Digium (Linux Support
? ? ? ? ? Services) - drupal.org - F5 Networks - Google - Microsoft -
? ? ? ? ? moodle.org - rubyforge.org - Tcpdump.org - wordpress.org
 
Products: Aironet - Apple iOS - Apple TV - Asterisk - Cisco
? ? ? ? ? IOS - Cisco Unified Communications Manager - Drupal - F5
? ? ? ? ? BIG-IP - Google Chrome - Kerberos - Mac OS X - Moodle - Rails
? ? ? ? ? - Tcpdump - WordPress
 
Headlines: 
 
? ? ? 1. WordPress Bugs Let Remote Users Conduct Cross-Site
? ? ? ? ? Scripting, Cross-Site Request Forgery, and Denial of Service
? ? ? ? ? Attacks

? ? ? 2. Moodle Bugs Permit Cross-Site Scripting, Cross-Site
? ? ? ? ? Request Forgery, and Information Disclosure Attacks

? ? ? 3. Cisco Aironet DHCP Lease Renewal Flaw Lets Remote
? ? ? ? ? Users Deny Service

? ? ? 4. Rails Action Pack Bug Lets Remote Users Determine
? ? ? ? ? if Specified Files Exist on the Target System

? ? ? 5. Tcpdump Multiple Flaws Let Remote Users Deny Service

? ? ? 6. Asterisk CONFBRIDGE Lets Remote Authenticated Users
? ? ? ? ? Execute Arbitrary System Commands

? ? ? 7. Asterisk DB Dialplan Function Lets Remote
? ? ? ? ? Authenticated Users Gain Elevated Privileges

? ? ? 8. Asterisk PJSIP Channel Driver Flaw in
? ? ? ? ? res_pjsip_refer Module Lets Remote Users Deny Service

? ? ? 9. Microsoft Windows Kerberos KDC Signature Validation
? ? ? ? ? Flaw Lets Remote Authenticated Users

? ? ? 10. Cisco IOS DLSw Processing Flaw Lets Remote Users
? ? ? ? ? Obtain Potentially Sensitive Information

? ? ? 11. Apple TV Bugs Let Remote Users Execute Arbitrary
? ? ? ? ? Code and Local Users Gain Elevated Privileges

? ? ? 12. Asterisk PJSIP Channel Driver Race Condition Lets
? ? ? ? ? Remote Users Deny Service

? ? ? 13. Asterisk ConfBridge State Transition Error Lets
? ? ? ? ? Remote Users Deny Service

? ? ? 14. Cisco Unified Communications Manager IM and
? ? ? ? ? Presence Service Discloses Valid Usernames to Remote Users

? ? ? 15. Apple iOS Lets Local Users Bypass Access Controls
? ? ? ? ? and Remote Applications Launch Arbitrary Binaries

? ? ? 16. Drupal Bugs Let Remote Users Highjack User
? ? ? ? ? Sessions and Deny Service

? ? ? 17. Cisco Aironet EAP Processing Error Lets Remote
? ? ? ? ? Users Deny Service

? ? ? 18. Google Chrome Multiple Bugs Let Remote Users
? ? ? ? ? Execute Arbitrary Code and Obtain Information

? ? ? 19. Apple OS X Bugs Let Remote Users Execute
? ? ? ? ? Arbitrary Code and Obtain Potentially Sensitive Information

? ? ? 20. F5 BIG-IP Lets Remote Authenticated Users Delete
? ? ? ? ? Files on the Target System

? ? ? 21. Asterisk PJSIP ACL Bug Lets Remote Users Bypass
? ? ? ? ? Access Controls

? ? ? 22. Asterisk IP Address Checking Flaw Lets Remote
? ? ? ? ? Users Bypass Access Controls in Certain Cases
 
 
------------------------------------------------------------------------
? ? ? ? ? ? ? Your SecurityTracker Vulnerability Alerts

1. WordPress
 
? ? Vendor: wordpress.org
 
? ? Several vulnerabilities were reported in WordPress. A remote
? ? user can cause denial of service conditions. A remote user can
? ? conduct cross-site scripting attacks. A remote user can conduct
? ? cross-site request forgery attacks. A remote user can compromise a
? ? target user's account.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031243
 

2. Moodle
 
? ? Vendor: moodle.org
 
? ? Multiple vulnerabilities were reported in Moodle. A remote user
? ? can conduct cross-site scripting attacks. A remote user can conduct
? ? cross-site request forgery attacks. A remote authenticated user can
? ? obtain potentially sensitive information.
 
? ? Impact: Disclosure of authentication information
 
? ? Alert: http://securitytracker.com/id/1031215
 

3. Aironet
 
? ? Vendor: Cisco
 
? ? A vulnerability was reported in Cisco Aironet. A remote user
? ? can cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031218
 

4. Rails
 
? ? Vendor: rubyforge.org
 
? ? A vulnerability was reported in Rails. A remote user can
? ? determine whether specified files exist on the target system.
 
? ? Impact: Disclosure of system information
 
? ? Alert: http://securitytracker.com/id/1031217
 

5. Tcpdump
 
? ? Vendor: Tcpdump.org
 
? ? Several vulnerabilities were reported in Tcpdump. A remote user
? ? can cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031235
 

6. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote
? ? authenticated user can gain elevated privileges on the target system.
 
? ? Impact: Execution of arbitrary code via network
 
? ? Alert: http://securitytracker.com/id/1031250
 

7. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote
? ? authenticated user can execute arbitrary code on the target system.
 
? ? Impact: User access via network
 
? ? Alert: http://securitytracker.com/id/1031251
 

8. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote user can
? ? cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031249
 

9. Kerberos
 
? ? Vendor: Microsoft
 
? ? A vulnerability was reported in Microsoft Windows Kerberos. A
? ? remote authenticated user can gain elevated privileges.
 
? ? Impact: User access via network
 
? ? Alert: http://securitytracker.com/id/1031237
 

10. Cisco IOS
 
? ? Vendor: Cisco
 
? ? A vulnerability was reported in Cisco IOS. A remote user can
? ? obtain potentially sensitive information.
 
? ? Impact: Disclosure of authentication information
 
? ? Alert: http://securitytracker.com/id/1031220
 

11. Apple TV
 
? ? Vendor: Apple Computer
 
? ? Several vulnerabilities were reported in Apple TV. A remote
? ? user can execute arbitrary code on the target system. A local user
? ? can obtain elevated privileges on the target system.
 
? ? Impact: Execution of arbitrary code via local system
 
? ? Alert: http://securitytracker.com/id/1031231
 

12. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote user can
? ? cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031248
 

13. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote user can
? ? cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031247
 

14. Cisco Unified Communications Manager
 
? ? Vendor: Cisco
 
? ? A vulnerability was reported in Cisco Unified Communications
? ? Manager IM and Presence Service. A remote user can determine valid
? ? usernames on the target system.
 
? ? Impact: Disclosure of system information
 
? ? Alert: http://securitytracker.com/id/1031240
 

15. Apple iOS
 
? ? Vendor: Apple Computer
 
? ? Several vulnerabilities were reported in Apple iOS. A
? ? physically local user can bypass access controls. An application
? ? can launch arbitrary binaries on the target system.
 
? ? Impact: Execution of arbitrary code via local system
 
? ? Alert: http://securitytracker.com/id/1031232
 

16. Drupal
 
? ? Vendor: drupal.org
 
? ? Two vulnerabilities were reported in Drupal. A remote user can
? ? hijack another user's session. A remote user can cause denial of
? ? service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031244
 

17. Aironet
 
? ? Vendor: Cisco
 
? ? A vulnerability was reported in Cisco Aironet. A remote user
? ? can cause denial of service conditions.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031219
 

18. Google Chrome
 
? ? Vendor: Google
 
? ? Multiple vulnerabilities were reported in Google Chrome. A
? ? remote user can cause arbitrary code to be executed on the target
? ? user's system. A remote user can obtain potentially sensitive
? ? information.
 
? ? Impact: Disclosure of system information
 
? ? Alert: http://securitytracker.com/id/1031241
 

19. Mac OS X
 
? ? Vendor: Apple Computer
 
? ? Several vulnerabilities were reported in Apple OS X. A remote
? ? user can cause arbitrary code to be executed on the target user's
? ? system. A remote user can obtain potentially sensitive information.
 
? ? Impact: Disclosure of system information
 
? ? Alert: http://securitytracker.com/id/1031230
 

20. F5 BIG-IP
 
? ? Vendor: F5 Networks
 
? ? A vulnerability was reported in F5 BIG-IP. A remote
? ? authenticated user can delete files on the target system.
 
? ? Impact: Denial of service via network
 
? ? Alert: http://securitytracker.com/id/1031216
 

21. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote user can
? ? bypass access controls.
 
? ? Impact: Host/resource access via network
 
? ? Alert: http://securitytracker.com/id/1031246
 

22. Asterisk
 
? ? Vendor: Digium (Linux Support Services)
 
? ? A vulnerability was reported in Asterisk. A remote user can
? ? bypass access controls.
 
? ? Impact: Host/resource access via network
 
? ? Alert: http://securitytracker.com/id/1031245
 


------------------------------------------------------------------------
To join, delete, or otherwise change your subscription, visit: 
http://www.securitytracker.com/help/accounts.html
 
To contact us, send e-mail to help at securitytracker.com 
(mailto:help at securitytracker.com)
 
If you need to refer to this weekly vulnerability summary when you
mail us, please provide us with following SecurityTracker message ID:
<WS.ALL.2014Nov24.2244.235812.XND>
 
 
Keep Track of the Latest Vulnerabilities with SecurityTracker!
 
http://www.securitytracker.com
 
 
copyright 2014, SecurityGlobal.net LLC
 
See disclaimer notice at:
http://www.securitytracker.com/learn/disclaimer.html
 
------------------------------------------------------------------------

############################

To unsubscribe from the SECURITYTRACKER-WEEKLY-ALL list:
write to: mailto:SECURITYTRACKER-WEEKLY-ALL-SIGNOFF-REQUEST at PEACH.EASE.LSOFT.COM
or click the following link:
http://peach.ease.lsoft.com/scripts/wa-PEACH.exe?SUBED1=SECURITYTRACKER-WEEKLY-ALL&A=1


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141125/614f0428/attachment.html>

From Bryan at bryanfields.net  Tue Nov 25 18:48:06 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Tue, 25 Nov 2014 13:48:06 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>
	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>
Message-ID: <5474CEE6.1030004@bryanfields.net>

On 11/25/14, 12:54 PM, mike at midnighteng.com wrote:
> 
> Bryan,
> I think if you search the list archives, you will find a answer for that
> method as it has been discussed before. I even think it is posted on a
> website somewhere.

I've only found this
http://ohnosec.org/pipermail/app_rpt-users/2009-November/000608.html
and it does not appear to have a way to do it in the portal.

The doc site has nothing about uploading the file on this page
http://docs.allstarlink.org/drupal/node/131

Thank you,
-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net


From n3fe at repeater.net  Tue Nov 25 19:13:45 2014
From: n3fe at repeater.net (Corey Dean)
Date: Tue, 25 Nov 2014 14:13:45 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <5474CEE6.1030004@bryanfields.net>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>
	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>
	<5474CEE6.1030004@bryanfields.net>
Message-ID: <5916B6A2-B51F-4F83-9A3A-6286BEE59ECA@repeater.net>

I think what he is trying to do is put his node number that is in the sounds/rpt/nodenames into a global distribution that doesnt exist.  I only know of 3 places that people get these updates kb2ear supports one, the wan system, and I have one that combines the two that also contains private nodes that people have.  Is this what you are trying to do?

If you want to send me your ulaw or gsm file, you can upload it at http://www.repeater.net/upload/html

If you want to download the audio files I have, here is the command to run from your nodes cli

rsync -av rsync://www.repeater.net/nodenames/ /var/lib/asterisk/sounds/rpt/nodenames/

I hope this is what you are looking for.  I do look at the uploaded files every few days so once I get them and verify them, they are available in the rsync.

Sent from my iPhone

> On Nov 25, 2014, at 1:48 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
>> On 11/25/14, 12:54 PM, mike at midnighteng.com wrote:
>> 
>> Bryan,
>> I think if you search the list archives, you will find a answer for that
>> method as it has been discussed before. I even think it is posted on a
>> website somewhere.
> 
> I've only found this
> http://ohnosec.org/pipermail/app_rpt-users/2009-November/000608.html
> and it does not appear to have a way to do it in the portal.
> 
> The doc site has nothing about uploading the file on this page
> http://docs.allstarlink.org/drupal/node/131
> 
> Thank you,
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


From wb3awj at comcast.net  Tue Nov 25 19:22:07 2014
From: wb3awj at comcast.net (Robert A. Poff WB3AWJ)
Date: Tue, 25 Nov 2014 19:22:07 +0000 (UTC)
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <5474CEE6.1030004@bryanfields.net>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>
	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>
	<5474CEE6.1030004@bryanfields.net>
Message-ID: <1191653461.2488677.1416943327573.JavaMail.zimbra@comcast.net>

As far as I know there is no distribution of custom node name files via the portal. 

Put them directly on your server in : /var/lib/asterisk/sounds/rpt/nodenames 
In GSM or preferably ulaw formats. 
With the file name being the node number (i.e. file name for node 27784 would be 27784.ulaw) 

Some time ago KB2EAR had posted an rsync link to his "repository" of node name files. 
You should be able to find that post in the list archive. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141125/d4d68d8c/attachment.html>

From Bryan at bryanfields.net  Tue Nov 25 23:08:55 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Tue, 25 Nov 2014 18:08:55 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <WM!a02a51604e8658d6843030ba53640535367351e60829c6d47f2362b03b88c01203cb1e854fbeccb8766285abf98d9719!@asav-2.01.com>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>	<5474CEE6.1030004@bryanfields.net>
	<1191653461.2488677.1416943327573.JavaMail.zimbra@comcast.net>
	<WM!a02a51604e8658d6843030ba53640535367351e60829c6d47f2362b03b88c01203cb1e854fbeccb8766285abf98d9719!@asav-2.01.com>
Message-ID: <54750C07.9040903@bryanfields.net>

On 11/25/14, 2:22 PM, Robert A. Poff WB3AWJ wrote:
> As far as I know there is no distribution of custom node name files via the
> portal.

The link I posted from 2009 said there was a way via the web portal.

There is this as part of the rc.updatenodelist script as well
 if [ $downloads -gt 100 ]
                 then
                         downloads=0
                         sleep 600
                         # use rsync to update the connect messages
                         $RSYNC -av rsync://allstarlink.org/connect-messages
/var/lib/asterisk/sounds/rpt/nodenames
                         break; # Don't dwell on one server, Look for a new server
                 fi

There are node name files at rsync://allstarlink.org/connect-messages for some
nodes as well

If this is not a feature, why is it in the script?

> 
> Some time ago KB2EAR had posted an rsync link to his "repository" of node name
> files.
> You should be able to find that post in the list archive.

Ok, is that different than the rsync://allstarlink.org/connect-messages
repository?

I'd question which repository is the proper one for the Allstar network.

Can anyone see how this can be confusing?
-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net


From bdboyle at bdboyle.com  Tue Nov 25 23:57:08 2014
From: bdboyle at bdboyle.com (Bryan D. Boyle)
Date: Tue, 25 Nov 2014 18:57:08 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <54750C07.9040903@bryanfields.net>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>
	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>
	<5474CEE6.1030004@bryanfields.net>
	<1191653461.2488677.1416943327573.JavaMail.zimbra@comcast.net>
	<WM!a02a51604e8658d6843030ba53640535367351e60829c6d47f2362b03b88c01203cb1e854fbeccb8766285abf98d9719!@asav-2.01.com>
	<54750C07.9040903@bryanfields.net>
Message-ID: <7B651309-50A8-4B99-A18C-F87C942B7875@bdboyle.com>

> On Nov 25, 2014, at 18:08, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
>> On 11/25/14, 2:22 PM, Robert A. Poff WB3AWJ wrote:
>> As far as I know there is no distribution of custom node name files via the
>> portal.
> 
> The link I posted from 2009 said there was a way via the web portal.
> 

It's now almost 2015.  The software has advanced a bit, as well as the population using it.  And still a volunteer effort.  And the documentation, such as it is, really should be read as a starting point, not canonical in many regards.  That's what the usefulness of list archive is for.

> There is this as part of the rc.updatenodelist script as well
> if [ $downloads -gt 100 ]
>                 then
>                         downloads=0
>                         sleep 600
>                         # use rsync to update the connect messages
>                         $RSYNC -av rsync://allstarlink.org/connect-messages
> /var/lib/asterisk/sounds/rpt/nodenames
>                         break; # Don't dwell on one server, Look for a new server
>                 fi
> 
> There are node name files at rsync://allstarlink.org/connect-messages for some
> nodes as well
> 
> If this is not a feature, why is it in the script?

Because of 'cruft', limited numbers of people maintaining the core because they have real jobs.

if it's not doing what you want, open up vi, delete the lines, save as a new file, and mod the crontab to use your new script.  It won't affect the net.

Options have been publicized (i use KB2EAR's repository) to work around issues like this, bought the O'Reilly Asterisk tome for more insight, and search voip.net for even more insights.  That's the beauty of open source: if something isn't working like you think it should, you can either wait for someone to fix it, fix it yourself, or figure out a workaround.

> 
>> 
>> Some time ago KB2EAR had posted an rsync link to his "repository" of node name
>> files.
>> You should be able to find that post in the list archive.
> 
> Ok, is that different than the rsync://allstarlink.org/connect-messages
> repository?
> 

Yes

> I'd question which repository is the proper one for the Allstar network.
> 

Any one that works for you.

> Can anyone see how this can be confusing?
> -- 

No, because it's a cooperative effort that, except for the registration server, is not controlled by any one person and depends on the system operator to manage their own system.

From mike at midnighteng.com  Wed Nov 26 07:30:25 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Wed, 26 Nov 2014 00:30:25 -0700
Subject: [App_rpt-users] =?utf-8?q?custom_node_announcement=3F?=
Message-ID: <20141126003025.71befee5dbd13c5325dd1a521b4e73ee.46ad9cb719.wbe@email06.secureserver.net>


Corey,

I had never had the desire to try that before but I tested it tonight
and I can see the benefit of the short/quick sound files over the
prolonged announcement digits.

So I made it into a script and sched it for update once a week on late
thurs night.
That won't task your server will it ?

I know the subject has come up several times on the list. Just could not
remember exact details.

Thanks for your efforts in improving things.
If for any reason you find the need to discontinue the great service,
let me know. I would host it if needed.

Thanks again,

...mike/kb8jnm

-------- Original Message --------
Subject: Re: [App_rpt-users] custom node announcement?
From: Corey Dean <n3fe at repeater.net>
Date: Tue, November 25, 2014 2:13 pm
To: Bryan Fields <Bryan at bryanfields.net>
Cc: "mike at midnighteng.com" <mike at midnighteng.com>, APP RPT
<app_rpt-users at ohnosec.org>

I think what he is trying to do is put his node number that is in the
sounds/rpt/nodenames into a global distribution that doesnt exist. I
only know of 3 places that people get these updates kb2ear supports one,
the wan system, and I have one that combines the two that also contains
private nodes that people have. Is this what you are trying to do?

If you want to send me your ulaw or gsm file, you can upload it at
http://www.repeater.net/upload/html

If you want to download the audio files I have, here is the command to
run from your nodes cli

rsync -av rsync://www.repeater.net/nodenames/
/var/lib/asterisk/sounds/rpt/nodenames/

I hope this is what you are looking for. I do look at the uploaded files
every few days so once I get them and verify them, they are available in
the rsync.

Sent from my iPhone

> On Nov 25, 2014, at 1:48 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
>> On 11/25/14, 12:54 PM, mike at midnighteng.com wrote:
>> 
>> Bryan,
>> I think if you search the list archives, you will find a answer for that
>> method as it has been discussed before. I even think it is posted on a
>> website somewhere.
> 
> I've only found this
> http://ohnosec.org/pipermail/app_rpt-users/2009-November/000608.html
> and it does not appear to have a way to do it in the portal.
> 
> The doc site has nothing about uploading the file on this page
> http://docs.allstarlink.org/drupal/node/131
> 
> Thank you,
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From electricity440 at gmail.com  Wed Nov 26 18:42:02 2014
From: electricity440 at gmail.com (Skyler F)
Date: Wed, 26 Nov 2014 11:42:02 -0700
Subject: [App_rpt-users] How to talk and receive from zoiper
Message-ID: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>

I setup zoiper on my mobile device to my node, and it says "ready" and gave
me a dial pad. What should I dial to talk on my node? I know the command
*99 and # are used for PTT and Key up, but I don't know how to get to the
phone area.

Thanks
Skyler KD?WHB

-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/9834745e/attachment.html>

From electricity440 at gmail.com  Wed Nov 26 18:42:56 2014
From: electricity440 at gmail.com (Skyler F)
Date: Wed, 26 Nov 2014 11:42:56 -0700
Subject: [App_rpt-users] How to talk and receive from zoiper
In-Reply-To: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
References: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
Message-ID: <CAJNyT0_k3vizgv98LM+cGqxPUHRSdSPLp0kws+FZbCnk8FmqCw@mail.gmail.com>

Whatever I type, it says "no route to connection"

On Wed, Nov 26, 2014 at 11:42 AM, Skyler F <electricity440 at gmail.com> wrote:

> I setup zoiper on my mobile device to my node, and it says "ready" and
> gave me a dial pad. What should I dial to talk on my node? I know the
> command *99 and # are used for PTT and Key up, but I don't know how to get
> to the phone area.
>
> Thanks
> Skyler KD?WHB
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/6edcabc2/attachment.html>

From n3fe at repeater.net  Wed Nov 26 18:58:02 2014
From: n3fe at repeater.net (Corey Dean)
Date: Wed, 26 Nov 2014 13:58:02 -0500
Subject: [App_rpt-users] How to talk and receive from zoiper
In-Reply-To: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
References: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
Message-ID: <71460507-C28E-4195-B4DE-E76754068696@repeater.net>

Once it says ready, use the dtmf and enter your node number and then dial.  Once connected you should be able to do what you want.

Sent from my iPhone

> On Nov 26, 2014, at 1:42 PM, Skyler F <electricity440 at gmail.com> wrote:
> 
> I setup zoiper on my mobile device to my node, and it says "ready" and gave me a dial pad. What should I dial to talk on my node? I know the command *99 and # are used for PTT and Key up, but I don't know how to get to the phone area.
> 
> Thanks
> Skyler KD?WHB
> 
> -- 
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/de6feb18/attachment.html>

From N1XBM at amsat.org  Wed Nov 26 19:30:25 2014
From: N1XBM at amsat.org (Robert Newberry)
Date: Wed, 26 Nov 2014 14:30:25 -0500
Subject: [App_rpt-users] How to talk and receive from zoiper
In-Reply-To: <71460507-C28E-4195-B4DE-E76754068696@repeater.net>
References: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
	<71460507-C28E-4195-B4DE-E76754068696@repeater.net>
Message-ID: <CAM09xEZ25QdYHPhg41hffu4b4cF_sYUSRwBh4c8dQq_n_dzNFA@mail.gmail.com>

Have you setup your node for an iax or sip connection yet?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/7711e2e9/attachment.html>

From electricity440 at gmail.com  Wed Nov 26 19:48:08 2014
From: electricity440 at gmail.com (Skyler F)
Date: Wed, 26 Nov 2014 12:48:08 -0700
Subject: [App_rpt-users] How to talk and receive from zoiper
In-Reply-To: <CAJNyT09o9=XTiu99ir7BjRFvA6+MULtOgqNBXPXysptzMLdmwQ@mail.gmail.com>
References: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
	<71460507-C28E-4195-B4DE-E76754068696@repeater.net>
	<CAM09xEZ25QdYHPhg41hffu4b4cF_sYUSRwBh4c8dQq_n_dzNFA@mail.gmail.com>
	<CAJNyT09o9=XTiu99ir7BjRFvA6+MULtOgqNBXPXysptzMLdmwQ@mail.gmail.com>
Message-ID: <CAJNyT094F+yXBN-n-zsMrGxeALM0w31HCZ8vJu25S6qkZ_ABpA@mail.gmail.com>

I guess I forgot to reply to the whole group. Dialing "40764 (my node
number)" gives me an "Error #3, no route to destination"



Here is my extensions.conf


[myiphone]
exten=40764,1,rpt(40764|P)



 -------------------------------------------------------


And here is my iAX.conf file
[myiphone]
username=myiphone
type=friend
context=myphone
host=dynamic
auth=md5
secret=<MyPasswordIsHere>
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
callerid="kd0whb"


I am assuming it is ok to put the [myiphone] right before the [general]
section. Everything Seems to be working though, becuase it would not even
register until I fixed a typo, being one [] said myiphone and one [] said
myphone.


On Wed, Nov 26, 2014 at 12:40 PM, Skyler F <electricity440 at gmail.com> wrote:

> Yes, I modified extensions.conf and iax.conf just like it said to here
>
> http://lists.allstarlink.org/pipermail/app_rpt-users/2014-March/008973.html
>
> On Wed, Nov 26, 2014 at 12:30 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>
>> Have you setup your node for an iax or sip connection yet?
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/6f1cee0e/attachment.html>

From electricity440 at gmail.com  Wed Nov 26 20:12:19 2014
From: electricity440 at gmail.com (Skyler F)
Date: Wed, 26 Nov 2014 13:12:19 -0700
Subject: [App_rpt-users] How to talk and receive from zoiper
In-Reply-To: <CANQAhPF78VU7+zi-ipAs5wfXB6cXWFLw2UoeB0oPsUDFVs57vQ@mail.gmail.com>
References: <CAJNyT08SNiaPrOV3vR3dXst3NnUc2=NU+Ojk8mFg4RpLWgB4_g@mail.gmail.com>
	<71460507-C28E-4195-B4DE-E76754068696@repeater.net>
	<CAM09xEZ25QdYHPhg41hffu4b4cF_sYUSRwBh4c8dQq_n_dzNFA@mail.gmail.com>
	<CAJNyT09o9=XTiu99ir7BjRFvA6+MULtOgqNBXPXysptzMLdmwQ@mail.gmail.com>
	<CAJNyT094F+yXBN-n-zsMrGxeALM0w31HCZ8vJu25S6qkZ_ABpA@mail.gmail.com>
	<CANQAhPF78VU7+zi-ipAs5wfXB6cXWFLw2UoeB0oPsUDFVs57vQ@mail.gmail.com>
Message-ID: <CAJNyT08JMqqmKTRu31zP8MVjo-iY-xvy-GTwnDxoRBcOKebJyQ@mail.gmail.com>

Thanks, that worked!

On Wed, Nov 26, 2014 at 12:51 PM, Michael Hebert <mhebert1975 at gmail.com>
wrote:

> You need to fix your context=myphone to match what is in your
> extensions.conf
> On Nov 26, 2014 1:48 PM, "Skyler F" <electricity440 at gmail.com> wrote:
>
>> I guess I forgot to reply to the whole group. Dialing "40764 (my node
>> number)" gives me an "Error #3, no route to destination"
>>
>>
>>
>> Here is my extensions.conf
>>
>>
>> [myiphone]
>> exten=40764,1,rpt(40764|P)
>>
>>
>>
>>  -------------------------------------------------------
>>
>>
>> And here is my iAX.conf file
>> [myiphone]
>> username=myiphone
>> type=friend
>> context=myphone
>> host=dynamic
>> auth=md5
>> secret=<MyPasswordIsHere>
>> disallow=all
>> allow=ulaw
>> allow=g726aal2
>> allow=gsm
>> codecpriority=host
>> transfer=no
>> callerid="kd0whb"
>>
>>
>> I am assuming it is ok to put the [myiphone] right before the [general]
>> section. Everything Seems to be working though, becuase it would not even
>> register until I fixed a typo, being one [] said myiphone and one [] said
>> myphone.
>>
>>
>> On Wed, Nov 26, 2014 at 12:40 PM, Skyler F <electricity440 at gmail.com>
>> wrote:
>>
>>> Yes, I modified extensions.conf and iax.conf just like it said to here
>>>
>>>
>>> http://lists.allstarlink.org/pipermail/app_rpt-users/2014-March/008973.html
>>>
>>> On Wed, Nov 26, 2014 at 12:30 PM, Robert Newberry <N1XBM at amsat.org>
>>> wrote:
>>>
>>>> Have you setup your node for an iax or sip connection yet?
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>>> down to the bottom of the page. Enter your email address and press the
>>>> "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>>
>>> --
>>> Skyler Fennell
>>> amsatnet.info
>>> KD?WHB
>>> electricity440 at gmail.com
>>>
>>
>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KD?WHB
>> electricity440 at gmail.com
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>


-- 
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141126/0620c077/attachment.html>

From Bryan at bryanfields.net  Wed Nov 26 20:15:52 2014
From: Bryan at bryanfields.net (Bryan Fields)
Date: Wed, 26 Nov 2014 15:15:52 -0500
Subject: [App_rpt-users] custom node announcement?
In-Reply-To: <WM!1e14721f257a673bc354647c50a1700078cd74b7193f496fa2995f99dcfdf4afd9017535c0e3a4f22f66b0d7726c7a9e!@asav-3.01.com>
References: <20141125105446.71befee5dbd13c5325dd1a521b4e73ee.f4a61d3d7c.wbe@email06.secureserver.net>	<WM!e9d46d5fdbc022d52fd64831f5a984eb8733e625f7e5787b1f71cd33960ae64b83046f9fb85e2b69e1a1d9db4e532f88!@asav-2.01.com>	<5474CEE6.1030004@bryanfields.net>	<1191653461.2488677.1416943327573.JavaMail.zimbra@comcast.net>	<WM!a02a51604e8658d6843030ba53640535367351e60829c6d47f2362b03b88c01203cb1e854fbeccb8766285abf98d9719!@asav-2.01.com>	<54750C07.9040903@bryanfields.net>
	<7B651309-50A8-4B99-A18C-F87C942B7875@bdboyle.com>
	<WM!1e14721f257a673bc354647c50a1700078cd74b7193f496fa2995f99dcfdf4afd9017535c0e3a4f22f66b0d7726c7a9e!@asav-3.01.com>
Message-ID: <547634F8.5040108@bryanfields.net>

On 11/25/14, 6:57 PM, Bryan D. Boyle wrote:
>>> The link I posted from 2009 said there was a way via the web portal.
>>> 
> It's now almost 2015.  The software has advanced a bit, as well as the
> population using it.  And still a volunteer effort.  And the documentation,
> such as it is, really should be read as a starting point, not canonical in
> many regards.  That's what the usefulness of list archive is for.

I'm using the source, and finding that in there is why I'm asking.  A search
of the archives turned up one post about it from 2009.

If the docs and the source aren't accurate, and the list is not authoritative,
then what is?

>>> If this is not a feature, why is it in the script?
> Because of 'cruft', limited numbers of people maintaining the core because
> they have real jobs.
> 
> if it's not doing what you want, open up vi, delete the lines, save as a
> new file, and mod the crontab to use your new script.  It won't affect the
> net.

I can't change that which I don't control.  That's why I'm asking.  Apparently
that's some kinda offense to people here.


> Options have been publicized (i use KB2EAR's repository) to work around
> issues like this, bought the O'Reilly Asterisk tome for more insight, and
> search voip.net for even more insights.  That's the beauty of open source:
> if something isn't working like you think it should, you can either wait
> for someone to fix it, fix it yourself, or figure out a workaround.

This begs the question, why not have it as an official part of the Allstar
network, the hooks are there, and certainly someone has rsync setup on
allstarlink.org for it.

Heck make the other repository the main one in the allstar source tree that
everyone builds from.  This is what makes Allstar a network vs. app_rpt and
linking to others via IAX.

>>> I'd question which repository is the proper one for the Allstar
>>> network.
>>> 
> Any one that works for you.

Well that's an issue.

I'm asking the network why we don't have this as a network wide standard.  I
don't care which one Allstar uses, but lets get everyone using the same one
across the network.

Hell I'm happy to write up some code and formal docs for it.

>>> Can anyone see how this can be confusing? --
> No, because it's a cooperative effort that, except for the registration
> server, is not controlled by any one person and depends on the system
> operator to manage their own system.

I'm asking about the Allstar network standards.  There is network standards
for audio, authentication, numbers, etc.  This certainly would fall under that
as well.

If you can't see how this is confusing we're failing at marketing Allstar and
to a lesser extent app_rpt.

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net


From steve at donegan.org  Sat Nov 29 14:11:06 2014
From: steve at donegan.org (Steven Donegan)
Date: Sat, 29 Nov 2014 14:11:06 +0000 (UTC)
Subject: [App_rpt-users] Grandstream HT-503 configuration for FXO/FXS gateway
In-Reply-To: <547634F8.5040108@bryanfields.net>
References: <547634F8.5040108@bryanfields.net>
Message-ID: <440746790.2152506.1417270266676.JavaMail.yahoo@jws106144.mail.bf1.yahoo.com>

Has anyone set up a Grandstream HT-503 FXO/FXS gateway with A.C.I.D. ? If so any configuration examples would be greatly appreciated. TIA.?____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141129/da090437/attachment.html>

From mike at midnighteng.com  Sat Nov 29 17:30:30 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Sat, 29 Nov 2014 10:30:30 -0700
Subject: [App_rpt-users] Event Managment "vars" Query
Message-ID: <20141129103030.71befee5dbd13c5325dd1a521b4e73ee.7bad14301d.wbe@email06.secureserver.net>


Hoping someone can save me from searching the source code.

I'm Building event management apps....


When looking at     rpt showvars <node>

I see

RPT_ALINKS=1,2135TU

What is the significance of the "U" after the mode T indicator?
What other options might appear there ?

Thanks,

       ...mike/kb8jnm




From doug at crompton.com  Sat Nov 29 18:24:03 2014
From: doug at crompton.com (Doug Crompton)
Date: Sat, 29 Nov 2014 13:24:03 -0500
Subject: [App_rpt-users] Grandstream HT-503 configuration for FXO/FXS
 gateway
In-Reply-To: <440746790.2152506.1417270266676.JavaMail.yahoo@jws106144.mail.bf1.yahoo.com>
References: <547634F8.5040108@bryanfields.net>,
	<440746790.2152506.1417270266676.JavaMail.yahoo@jws106144.mail.bf1.yahoo.com>
Message-ID: <BLU172-W4234138D6E6B8033AF1746BA7F0@phx.gbl>

Steve,

 I have been using the 503 as my fxo/fxs on my Asterisk PBX system for several years. It works real well. It replaced a Linksys 3000 which gave me nothing but problems for years. I do not have that system connected to my Allstar/Asterisk server which is a different system. I have connected the two systems together though, Asterisk to Asterisk for testing and it does work.

You can just follow the procedure to get it running with Asterisk as a sip device for both the fxs and fxo channels and then link it to the radio side. It might be easier if you actually had a sip phone on your local network for testing.

I could share my Asterisk PBX setup of the 503 if you like. I have used Asterisk as my home PBX controller for years. The fxs side handles my local analog phones, the rest are digital, and the fxo side routes local calls out over a standard phone line while the others are routed voip. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Sat, 29 Nov 2014 14:11:06 +0000
From: steve at donegan.org
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Grandstream HT-503 configuration for FXO/FXS gateway

Has anyone set up a Grandstream HT-503 FXO/FXS gateway with A.C.I.D. ? If so any configuration examples would be greatly appreciated. TIA. ____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us

    
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141129/710d12a1/attachment.html>

From ke6pcv at cal-net.org  Sat Nov 29 18:24:25 2014
From: ke6pcv at cal-net.org (Marshall Oldham)
Date: Sat, 29 Nov 2014 10:24:25 -0800
Subject: [App_rpt-users] AllStarLink Financial Donation
Message-ID: <000c01d00c01$b4a558a0$1df009e0$@org>

Greetings fellow AllStarLink members, 

 

Once again I am reposting this email which is very similar to last year with the hopes that we
as the amateur community can step forward and support our hobby, mainly the app_rpt and
AllStarLink technology that we all enjoy today. 

 

As many of you that are new to app_rpt might NOT know. The creator of app_rpt and the
Allstarlink network has never charged or asked for financial support to keep the system going
for use in amateur radio.

 

He has never charged users money to be a part of app_rpt or for use of the network, nor has he
ever made any profit off of specific hardware sales for the Allstarlink network.  Through the
years he has put in a great deal of time and dedication along with his exceptional talents to
make app_rpt and the Allstarlink network the great VOIP technology that it has become today.
No other VOIP technology in the amateur radio community can even compare to the technology,
features and capability that is offered for free to anyone wishing to setup a node.  

 

Another understated fact is that there are monthly costs associated with keeping things running
smoothly for the system. These costs are for server collocation, domain certifications and so
on, amounting to roughly $175 per month.  Jim pays these monthly fees from donations, but
mostly out of his own pocket. It would be nice if we could all pitch in and help him to at the
least cover these monthly costs for this coming year?  

 

I am proposing that we all donate to this cause via PayPal at the following URL. 

 

https://allstarlink.org/

 

At the top of this webpage just slightly down there is a PayPal donate button.

 

In the spirit and season of giving, let's all try and help out with the financial side, so we
can continue to use and enjoy this great technology that we have all come to know and love!

 

I would also like to thank Jim, WB6NIL for all the many hours of work and support that he and
others have donated to this hobby so that the amateur community at large can benefit and enjoy
the use of his technology on a daily basis for free. 

 

73

 

Marshall - ke6pcv

Node 2065, 2066, 2067, 2068, 29147, 29148, 29149, 29947, 29948, 29949  

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141129/caf9109c/attachment.html>

From eilgni at gmail.com  Sat Nov 29 22:17:56 2014
From: eilgni at gmail.com (Eynar Lopez)
Date: Sat, 29 Nov 2014 16:17:56 -0600
Subject: [App_rpt-users] Grandstream HT-503 configuration for FXO/FXS
	gateway
In-Reply-To: <BLU172-W4234138D6E6B8033AF1746BA7F0@phx.gbl>
References: <547634F8.5040108@bryanfields.net>
	<440746790.2152506.1417270266676.JavaMail.yahoo@jws106144.mail.bf1.yahoo.com>
	<BLU172-W4234138D6E6B8033AF1746BA7F0@phx.gbl>
Message-ID: <CAD83VjdtLBL61w5BRiUE5dfOOTwmsENPjwao3j7sHoti7K0jdw@mail.gmail.com>

You can use the gateways interoperability guide from Grandstream

http://www.grandstream.com/products/gxw_series/gxw410x/documents/gxw410x_interop_asterisk.pdf

Just use port=5062 for FXO port.


2014-11-29 12:24 GMT-06:00 Doug Crompton <doug at crompton.com>:

> Steve,
>
>  I have been using the 503 as my fxo/fxs on my Asterisk PBX system for
> several years. It works real well. It replaced a Linksys 3000 which gave me
> nothing but problems for years. I do not have that system connected to my
> Allstar/Asterisk server which is a different system. I have connected the
> two systems together though, Asterisk to Asterisk for testing and it does
> work.
>
> You can just follow the procedure to get it running with Asterisk as a sip
> device for both the fxs and fxo channels and then link it to the radio
> side. It might be easier if you actually had a sip phone on your local
> network for testing.
>
> I could share my Asterisk PBX setup of the 503 if you like. I have used
> Asterisk as my home PBX controller for years. The fxs side handles my local
> analog phones, the rest are digital, and the fxo side routes local calls
> out over a standard phone line while the others are routed voip.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Sat, 29 Nov 2014 14:11:06 +0000
> From: steve at donegan.org
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Grandstream HT-503 configuration for FXO/FXS
> gateway
>
>
> Has anyone set up a Grandstream HT-503 FXO/FXS gateway with A.C.I.D. ? If
> so any configuration examples would be greatly appreciated. TIA.
>
> ____________
> Steven Donegan
> KK6IVC
> SSCC/NORC Life Member, Car #86
> www.sscc.us
>
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Eynar L?pez Garc?a
Telf: +505 25342659
M?vil Movistar +505 88979993
M?vil Claro +505 89175807

LFS User # 24349
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141129/d4065bac/attachment.html>

From sam.nabkey at gmail.com  Sun Nov 30 13:46:33 2014
From: sam.nabkey at gmail.com (Sam Nabkey)
Date: Sun, 30 Nov 2014 08:46:33 -0500
Subject: [App_rpt-users] Remote Base setup
Message-ID: <CAO8AawpB+xBV+se_1QB-DXgwH_T4QjrJr94-sSWVZuhX9-K2Pg@mail.gmail.com>

Hello all...

I have been working on an agile remote base using an Icom 706.  I have seen
a lot of posts and read a lot of ideas on using this radio.

I first attemped using this under the Beagle Bone but I didn't have any
luck.  SO I switched to an ACID install that was previously working as a
Repeater Node.

I first added the remote stuff back to the rpt.conf - and the symptom
returned.

The only working config has the line 'remote = ic706' commented out.

Anyone have any ideas on why the USB interface won't start, or the node
would die just because the remote statement was added?

I could use some pointers?

-- 

*Samuel T. Nabkey - K8SN*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141130/317fdbb2/attachment.html>

From sam.nabkey at gmail.com  Sun Nov 30 15:21:16 2014
From: sam.nabkey at gmail.com (Sam Nabkey)
Date: Sun, 30 Nov 2014 10:21:16 -0500
Subject: [App_rpt-users] Remote Base setup
In-Reply-To: <CAO8AawpB+xBV+se_1QB-DXgwH_T4QjrJr94-sSWVZuhX9-K2Pg@mail.gmail.com>
References: <CAO8AawpB+xBV+se_1QB-DXgwH_T4QjrJr94-sSWVZuhX9-K2Pg@mail.gmail.com>
Message-ID: <CAO8AawpphpxpYy_DpwbMo9VyfDYyCAePg3V-5WX8RCe4r1VFXA@mail.gmail.com>

Now wouldn't that be something. . I'll check on that!


On Nov 30, 2014 8:46 AM, "Sam Nabkey" <sam.nabkey at gmail.com> wrote:

> Hello all...
>
> I have been working on an agile remote base using an Icom 706.  I have
> seen a lot of posts and read a lot of ideas on using this radio.
>
> I first attemped using this under the Beagle Bone but I didn't have any
> luck.  SO I switched to an ACID install that was previously working as a
> Repeater Node.
>
> I first added the remote stuff back to the rpt.conf - and the symptom
> returned.
>
> The only working config has the line 'remote = ic706' commented out.
>
> Anyone have any ideas on why the USB interface won't start, or the node
> would die just because the remote statement was added?
>
> I could use some pointers?
>
> --
>
> *Samuel T. Nabkey - K8SN*
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141130/34137327/attachment.html>

From mike at midnighteng.com  Sun Nov 30 16:25:51 2014
From: mike at midnighteng.com (mike at midnighteng.com)
Date: Sun, 30 Nov 2014 09:25:51 -0700
Subject: [App_rpt-users] =?utf-8?q?Remote_Base_setup?=
Message-ID: <20141130092551.71befee5dbd13c5325dd1a521b4e73ee.0ac5453171.wbe@email06.secureserver.net>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141130/6529fa68/attachment.html>