[App_rpt-users] Installation And configuration of URIs with asterisk app_rpt

[Doug Crompton]

Salik,

  I think you need to give us more information. What kind of problems are you having? Is it just with the DMK URI or Allstar in general?

The DMK URI's green LED should light up at boot and if you type at the Linux prompt 'lsusb' you should see it listed. That would be your first step. It should look like this. The C-media device is the DMK URI. You may have other USB devices present also.

[root at WA3DSP_Allstar ~]# lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0d8c:013a C-Media Electronics, Inc.
Bus 002 Device 001: ID 0000:0000

If that seems OK then when you start Asterisk and everything is configured properly the green LED should blink at about a 2pps rate.

As far as your node is concerned, have you received a node number and password from allstarlink.org?

If you have questions about the configuration files I am sure someone here could help you.

Also have you considered using the Beagle Bone Black for your node? I am not sure if that is available in your country or how easy it is to get but it is much easier to setup and use. If you had all the hardware you could have it setup and running in 10 minutes or less. The DMK URI would be the most expensive item and you already have that. You can view the web page at:

hamvoip.org
 
73 Doug
WA3DSP
http://www.crompton.com/hamradio


Date: Fri, 14 Nov 2014 04:27:35 +0000
From: saliksatti at yahoo.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Installation And configuration of URIs with	asterisk app_rpt

Hi All,          I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance.
 Salik Mumtaz Satti, A-EXEN

National Radio And Telecommunication Corporation, Haripur Pakistan 

www.nrtc.com.pk

salik.satti at nrtc.com.pk

Contact: +923155414048

Skype: salik.satti6




_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141114/8f0e34a6/attachment.html>