[App_rpt-users] Voter board

[Chuck Henderson]

An easy error is having the TX and RX swapped where you connect the GPS to
the voter board. Try it the other way.

On Sat, Nov 15, 2014 at 12:27 AM, Chuck Henderson <
rpt2 at chuck.midlandsnetworking.com> wrote:

> set the bootloader IP to be the same as the voter board IP, or make it
> different than anything else on the network.  It is the IP that the voter
> board uses when it is running the bootloader code.  It can not have the
> same IP as your laptop.  That will not work.
>
> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net> wrote:
>
>>
>> I built a through hole voter board and interfaced it to a GPS 18 LVC and
>> my server. I set the board up as a master, transmit. The LED shows the GPS
>> locked and 98 command shows the GPS,
>> but I am getting the following error when telnetting into the board:
>>
>> Warning: GPS Data time period elapsed.
>>
>> The error is timestamped and occurs every second. I made sure the data
>> format was NMEA per archived messages on here by connecting the GPS to
>> SNSRCFG. The config appears to be set up correctly.
>> What other areas do I need to look at to fix this warning?
>>
>> I did notice you can choose quite a few NMEA messages in the SNSRCFG
>> profile. Does it matter if all are checked?
>>
>> I have a second issue with updating the firmware. The board is at Rev
>> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens
>> when I click on the "capture target" button after resetting the voter
>> board. The target ip is the voter board and the bootloader ip in the voter
>> is my laptop with ENC_Loader.
>>
>>  The IC(s) were originally programmed by a friend in another state so I
>> never experienced what it take to do the initial programming.
>>
>>
>> Thanks for your help,
>> Corey
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>> page. Enter your email address and press the "Unsubscribe or edit options
>> button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/853a9207/attachment.html>